50' Direct Fit Rsg250 Spool Gun F Miller Trailblazer®

US $570

Elk Grove Village, Illinois, United States
Jun 24th

Open on mobile:
QR code

If you want a shipping discount on multiple items, buy the items you want, BUT do not pay for any items until AFTER we send you the invoice. The invoice will be in your “My E-bay” > “Buying” > “Won” area. Separate payments for each item by PayPal CANNOT be combine for discounted shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We cannot refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt, wait for us to send you an invoice! A brand new HTP RSG-500 spool gun set up to plug right in to a Miller Trailblazer® which has a 14 pin plug for the spool gun, a CV setting, and a contactor. The RSG-500 has a duty cycle of 60% @ 250 amps. The wire feed rate is adjustable from 50 to 650 inches/minute. It will handle .023, .030, .035, and ..045" diameter wires. It will feed Aluminum, Steel, Stainless Steel and Flux Cored wires. And the RSG-250 is made in the USA. And this gun is 50' long! If you need to weld on a 40 ft trailer, you can park your service truck at one end of the trailer, and get around the entire trailer without having to move your truck. The wire feed rate is easily adjusted without going back to the welder, since we put the wire feed adjustment right in the bottom of the handle. We use a special notched tip for welding aluminum - the tip transfers the welding current to the wire better since there is a slight bend in the notch, forcing the wire to contact the tip. The notch also makes it much easier to remove a burnback if the wire burns back to the tip. Connection is simple! 1) Plug the 14 pin plug supplied with your RGS-250 into the 14 pin recepticle on the front of your Trailblazer®. 2) Connect the gas hose to your regulator. 3) Connect the power cable to correct lug on your Trailblazer® Miller wants you to buy a Spoolmatic® 30A welding gun for about $1000 and a WC24 controller for another $250. That is $1250! You can keep $200 of your hard earned money in your pocket and you get an extra 20 ft of cable with the HTP system since the spool gun and the control module are both $949! Save time, money and gas - plug your zip code into the shipping calculator to find out how much it will cost to have this spool gun shipped directly to you by UPS. ***Save on shipping by combining purchases of select MIG, TIG, or Plasma parts. However, you must pay for all items with one combined payment for this shipping discount. Separate payments for each item are not eligible for a shipping discount. Go to our store and see all the other items we have for sale: http://stores.ebay.com/welders4less Again, if you want a shipping discount on multiple items, do not pay for any items until after we have sent you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We cannot refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt, wait for us to send you an invoice!! If you need any other hard to find welder parts that are not listed, send us an e-mail with a digital photo- we might have just what you need. Buy in confidence from HTP America, Inc., your total welding specialist since 1981, where for over 30 years all we have sold are quality welding supplies at affordable prices. Call us at 1-800-USA-WELD (800-872-9353) or send an e-mail if you have any questions on our items. RSG500-MIL14