I have had this for a couple years and used it exclusively for doing resin infusions in my shop. I ALWAYS used a resin trap and it is obvious when you look in the inlets. It has no problem pulling 28+" on a 3' x 5' tool.
Item Condition: This pump is in good working condition with some wear and use. The top plate is a bit dented and there are some scuffs and scratches. The back electrical plate is missing.
This is a listing for a Allegro A-750 Ambient Air Pump 9821 What you will get: Allegro A-750 Ambient Air Pump 9821 Bag with what I think are 4 spare vanes Bag with what I think is a spare filter. Manual Description: This is an Allegro A-750 Ambient Air Pump 9821 with extra parts. I could not find the part numbers on the bags of extra parts so I am not 100 percent sure that these are parts for this pump.
Portable! Exclusive Breathe-Cool II® System! This system was designed for refinishers when cartridge type respirators are not allowed or clog too quickly (spraying isocyanates, stri
BRAND NEW SIMADRE 50A CUTTER MODEL with BETTER CONTROL PANEL and High-Performance Cutting Torch and Free 30 Consumables =This unit comes with a One year warranty=
For Sale is a NEW International Welding Equipment CUT 50C Plasma Cutter. We also carry and sell the optional universal welding and power source cart from Norstar. (assembly required) UPS shipping is available.
******The warning light comes on when switched to plasma cutting or MMA mode, I have never used or tested the TIG mode but the light is not coming on if its on this setting when turned on. I had a problem before with the warning light coming on but it went away on its own and worked fine for several months. The light may go away again on its own or may have something loose inside or may need to be serviced.
Jaguar Gravity Feed Spray Gun The Jaguar J100H is a much lower cfm gun if you have a smaller compressor. Features the same great atomization as the JSLP, but with less compressor. Only 6-8 cfm required, which is in the range of most smaller shop compressors.
BRAND NEW SIMADRE 50A CUTTER MODEL with BETTER CONTROL PANEL and High-Performance Cutting Torch and Free Consumables =This unit comes with a One year warranty=
SIMADRE CT5000D 50 Amp Dual Voltage Plasma Cutter - This unit comes with One Year Warranty BRAND NEW 2015 MODEL with BETTER CONTROL PANEL and High-Performance Cutting Torch and Free Consumables DIGITAL DISPLAY V-MOSFET TECHNOLOGY AND CSA /CE APPROVED It is Brand New DUAL VOLTAGE 50Amp Plasma Cutter Welder with High Performance Cutting Torch.
SIMADRE CT5000D 50 Amp Dual Voltage Plasma Cutter BRAND NEW 2015 MODEL with BETTER CONTROL PANEL - air pressure knob and High-Performance Cutting Torch and Free 30 Consumables DIGITAL DISPLAY V-MOSFET TECHNOLOGY AND CSA /CE APPROVED It is a Brand New 5000D DUAL VOLTAGE 50Amp Plasma Cutter Welder with High Performance Cutting Torch. SIMADRE 50 Amp Dual Voltage Cutters are very stable machines, please look up all the excellent feedbacks we receive from our customers on our 50 Amps cutters.
Heres a Bank of Three Medo in series switched on a mounted Plate barely used MEDO VP0625-V1014-P2-0511 vacuum pump for grabs. This pump runs on 115VAC, 50-60Hz, 1.4A. It is VERY quiet, and can pull 9.84in Hg.
UP FOR SALE VACUUM PUMP , HERE ARE THE SPECS : Compressor Type Rotary Vane HP 3/4 Voltage 115/230 Hz 50/60 Phase 1 Full Load Amp s12.2/6.1 Inlet Size 3/8" NPT Outlet Size 3/8" NPT Free Air CFM @ 0 PSI10.00 Free Air CFM @ 10 PS
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
