50 Pack - Standard External Retaining Ring 5/64" Shaft Diameter, 0.015" Thick

US $6.68

Summerville, South Carolina, United States
Jan 29th

Open on mobile:
QR code

Compatible Groove Depth 0.007 inches Compatible Groove Diameter 0.222 inches Compatible Groove Width 0.018 inches For Outside Diameter 5/64 inches For Shaft Diameter 5/64 Indentation Hardness 86 rockwell_15N Inside Diameter 0.215 inches Inside Diameter Tolerance +0.002"/-0.004 inches Item Shape Standard Number of Items 50 Outside Diameter 0.093125 inches Thickness 0.015 inches Thickness Tolerance +0.002"/-0.002 inches Brand Name Small Parts Part Number B00D2B5QLC Material Type Carbon Steel System of Measurement Inch Body Style Standard Exterior Finish Zinc Yellow Chromate Plated Grade SAE 1060-1090 Import Designation Made in US Installation Method Axial Manufacturer Series Number SH Style Name Tapered Section UNSPSC Code 31163202 tandard round shape has lug holes on each end for installing with a tool Tapered section construction provides flexibility to facilitate installation Axial assembly mounting style has the ring install by sliding onto a shaft from the end 1060-1090 carbon steel is often used in applications where strength is the primary consideration, and the zinc yellow chromate plating offers good corrosion resistance Made in USA The standard external retaining ring has a tapered section, assembles axially, is made of zinc yellow chromate plated 1060-1090 carbon steel, and is made in USA. The ring has a standard round shape with a lug hole on each end for installing onto the shaft with a tool. The ends pry apart with the installation tool and snap back towards each other when installed on the shaft for a tight grip. The tapered section style provides the ring with flexibility to facilitate installation and typically withstands higher thrust loads than constant section and spiral rings. The ring installs by sliding onto a shaft from the end, also called axial assembly. Axially installed rings reach further around the outside diameter of the shaft than radially installed rings. The 1060-1090 carbon steel is often used in applications where strength is the primary consideration, and the zinc yellow chromate plating offers good corrosion resistance. Retaining rings attach to a shaft (external) or install in a bore (internal), creating a shoulder to maintain component positioning within an assembly. While most rings install into a machined groove either on the inside or outside diameter of a shaft, self-locking rings attach to a shaft by using friction from means such as teeth and notches to maintain placement. Retaining rings should fit tightly enough into the groove or onto the shaft so they won't experience any movement. Call us at 1-843-261-9553 / 1-800-961-2124 or contact us via eBay with any questions.