5400 GPM Water Filter Lakos centrifugal separator Irrigation, Industrial 14" I/O, US $230 – Picture 0

5400 GPM Water Filter Lakos centrifugal separator Irrigation, Industrial 14" I/O, US $230 – Picture 1

5400 GPM Water Filter Lakos centrifugal separator Irrigation, Industrial 14" I/O, US $230 – Picture 2

5400 Gpm Water Filter Lakos Centrifugal Separator Irrigation, Industrial 14" I/o

US $230

Irving, Texas, United States
Jan 30th

Open on mobile:
QR code

This is a three day auction for a 2950 to 5450 GPM centrifugal water separator Filter built by Lakos Claude Laval Corporation. This system is model number LAX-1409-B and has a max water pressure of 150 PSI. This system has 14” input and output ports. The system was previously installed at a semiconductor facility that we are dismantling and it was used to filter the chiller water so it and is in very good condition. The system was in use up until we shut down the facility a few months ago. Here is a link the manufactures website for industrial application http://www.lakos.com/Industrial.htm Here is a link for agricultural applications. http://www.lakos.com/irrigation.htm These systems are very good at cleaning sand dirt and debris from the water stream. These systems can be used in any application where you need to separate particulate (sand etc.) from your water stream. They are also used to separate particulate from oil and other fluids. Here is some info from the manufactures website. Irrigation Sand Problems LAKOS irrigation products are designed to remove small particles, organics, and floating contaminants from irrigation and agricultural systems. LAKOS sand separators feature a unique under drain design with greater surface area than competing designs, leading to greater efficiency and fewer backwashing cycles. The complete line of LAKOS irrigation products are designed to effectively protect drip emitters, prevent clogging, protect equipment, and reduce water waste. Industrial Water Filtration Applications & Other Liquids Industrial processes often experience heavier sand and solids problems. LAKOS industrial water filters are specifically designed to remove these solids from the fluid stream and safely purge them to another location. Most Common Industrial Water Filtration Solutions: Spray nozzle and small orifice protection · Avoid fouling, clogging and/or abrasive wear. Eliminate excessive downtime, maintenance and/or parts replacements. Pre-filtration of larger solids so finer filtration can be more effective, such as as water treatment systems Reduce fine-micron cartridge or bag filter consumption with the pre-removal of larger solids. Extend the operating cycles of filter elements and water treatment processes. Reduce maintenance, downtime and filter media replacement costs. Heat Exchanger Protection in process environments Control solids fouling. Remove precipitated grit and scale. Maintain optimum system efficiencies and avoid excessive energy loss. Waste minimization/Reduction Extend the life of process liquids by removing troublesome solids. Concentrate separated solids for easy disposal or recovery/re-use. Reduce your government-regulated waste for significant process-related savings. These separators weigh 2400 lbs and are 107”x30” x36” so they will take. They need to be transported on their side. They will be shipping from Irving Tx 75061. The winning bidder will be responsible for directly paying the shipping company. We will load at no additional charge. We get very good shipping rates and I can hook you up with our carrier if you would like a quote. The winning bidder can use any carrier they desire. We no longer handling shipping because we had too many customers that could not offload the trucks when they arrived and the trucking companies were up charging me for slow offloads. Thanks for considering this system. If you have any additional questions please give me a call Mark 206-399-9717

Condition:

Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...

Country of Manufacture

United States