56 Rpm 6-18v Econ Gearmotor (1:171 Ratio) Part # 638348 By Servocity

US $350

  • Winfield, Kansas, United States
  • Jun 15th
914.01  56 RPM (12VDC) Reliable and affordable gearmotor!    We offer several 4mm bore gears that work with this motor. Operating Specifications: Operating Voltage Range: 6~18VDC Rated Voltage: 12VDC Operating Temperature: -10 ~ +60°C Max No-Load Current: 0.11A No-Load Speed: 56 RPM Min. Stall Torque: 65.82 kgf-cm (914.01 oz-in) Max. Stall Current: 3.85A @ 12VDC Output Power at Max. Efficiency: 4.26W Gear Type: Spur Gear Ratio: 171:1 Shaft size: 4mm (0.1575”) Net Weight: 0.20lb (3.25oz) Mounting Screw Size: 3mm     Use with our 4mm bore clamping or set screw hubs.   Shown with a 4mm to 1/4” shaft coupler The Digital Manual Speed Controller (right) provides proportional forward and reverse control of your gearmotor. Simply supply 6-16V to the controller and plug in your gearmotor. The speed and direction are controlled by the knob. Stall Torque is the torque which is produced by a motor when the output rotational speed is zero, it may also mean the torque load that causes the output rotational speed of a motor to become zero - ie to cause stalling. Electric motors continue to provide torque when stalled. However, electric motors left in a stalled condition are prone to overheating and possible damage since the current flowing is maximum under these conditions.  

Directions

Similar products from Motor with Power Less than 0.5 HP

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies