5A LED Drive Lithium Battery Charger with Voltmeter Ammeter DCDC Module, US $7.55 – Picture 0

5A LED Drive Lithium Battery Charger with Voltmeter Ammeter DCDC Module, US $7.55 – Picture 1

5a Led Drive Lithium Battery Charger With Voltmeter Ammeter Dcdc Module

US $7.55

Shenzhen, China
Jan 29th

Open on mobile:
QR code

ASP-EZone Store Home Best Sellers New Arrivals Wholesale Items Gift Section Contact us Store Categories Industrial Electronics LEDs DIY Kits Relay Modules Wireless Modules Sensors Power Modules LCD Modules Voltage Ammeter PCB Breadboards Motors Series Development Boards Connector&Cable Robot Parts Arduino Series 3D Printer Series Raspberry Pi Series Hot sale Funduino Mega 2560 ATmega2560-16AU Board HC-SR04-Module 50W High Power LED L298N Dual Stepper Module Jumper wires+MB102830 1602 LCD Display Module New Arrival 20W High Power LED 8-25x1w High Power LED 5V White LED Panel Board Wireless Transceiver Module HC-11-USB CC1101 HC-08 Wireless Bluetooth Transceiver Green 16 mm speaker metal push button Payment info Similar Products for Recommendation!!! $1.55 $9.44 $1.89 $17.61 DC-DC Converter Step Up 12V 2 Channel Wireless Remote Control 5V Mini USB Charger LM2596S DC-DC Step Down $6.55 $3.88 $4.44 $3.29 Mifare RC522 Card Read Module 3 Axis Compass Magnetometer Sensor Module DC Power Apply Pinboard Humidity Detection Sensor Product Name:5A LED Drive Lithium Battery Charger with Voltmeter Ammeter Professional DCDC Module SKU:5140 For more items, Please click here. Items Description Features: Highlights : Contains the voltmeter, ammeter, power meter, USB interface for charging the digital products. Note: 1.When you use the product, the module inputs and outputs to be isolated from ground. 2.USB output voltage is consistent with the module, not a fixed 5V output. When charging for digital equipment, make sure USB output voltage is 5V. 3.Some customers report: “The module can not adjust the output voltage is always equal to the input voltage.” When you encounter this problem, please counterclockwise rotation of the “voltage potentiometer” 10 laps or more, then use the module you can adjust the output voltage. Because the factory default output voltage of about 20V. Specifications 1.Input voltage range:5-36VDC 2.Output voltage range:1.25-32VDC adjustable 3.Output current: 0-5A 4.Output power: 75W 5.High efficiency up to 96% 6.Built in thermal shutdown function 7.Built in current limit function 8.Built in output short protection function 9.Input reverse polarity protection: None (if required, high current diode in series with the input). 10.L x W x H =68.2x38.8x15mm 11.Weight: 39g Application 1.Use as a step-down modules with overcurrent protection Usage: (1) Adjust the right button so that “OUT” LED lighted, Digital meter shows the value of output voltage ,adjust the “voltage potentiometer” so that the output voltage reaches the value you want. (2) Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined overcurrent protection value. (For example, the Digital meter displays the current value of 4A, then you can use the module to a maximum current of 4A) (3) Connected to the load. 2.Use as a battery charger Usage: (1) Make sure you need to charge the battery float voltage and charging current; (if lithium parameters 3.7V/2200mAh, then the float voltage is 4.2V, the maximum charging current 1C, ie 2200mA) (2)Under no-load conditions, adjust the “Voltage potentiometer” so that the output voltage reaches the float voltage; (if to 3.7V rechargeable lithium battery, the output voltage can be adjusted to 4.2V) (3)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined Charging current value. (4)Charge turn lamp current factory default is 0.1 times the charging current; (Battery during charging current is gradually reduced, if the charge current setting is 1A, then when the charge current is less than 0.1A, blue lights turned off, the green light is on, which means that the battery is fully charged) (5)connected to the battery charge. (1,2,3,4 steps as: Output is unloaded, do not connect the battery) 3.Use as a LED constant current driver module Usage: (1)Adjust the “voltage potentiometer” so that the output voltage reaches the value you want. (2)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined LED operating current. (3)Connect LED, work. (1,2 steps as: Output is unloaded, do not connect LED) Voltmeter and ammeter calibration method: Module with manual calibration function can correct display precision voltage and current, if you think the current voltage and current accuracy to meet the requirements, do not perform the following operations. (1) Output voltage calibration steps Step 1, adjust the right button so that “OUT” LED lighted, Digital meter shows the value of output voltage; Press the right button for more than 2 seconds, release, Digital meter and “OUT” LED flashes in synchronization so that you enter the output voltage calibration mode. Step 2, press the right button (normal speed), the voltage value is adding up a unit; Press the left button, minus a unit; Due to a unit is less than 0.1V, the minimum voltage display to 0.1V, so you need to continuously press 1-5 times to see the voltmeter change 0.1V, how many times voltmeter change 0.1V by pressing the key, depending on the current display voltage, the higher the voltage, the fewer the number of press. Step 3, press the right button for more than 2 seconds, release, to exit the output voltage calibration mode. All parameters set to automatically power down to save. (2) Input voltage calibration steps Step 1, adjust the right button so that “IN” LED lighted, Digital meter shows the value of input voltage; press the right button for more than 2 seconds, release, Digital meter and “IN” LED flashes in synchronization so that you enter the input voltage calibration mode. Steps 2 and 3, consistent with the output voltage calibration method. (3)Output current calibration steps Step 1, adjust the right button so that Digital meter shows the value of output Current. Press the right button for more than 2 seconds, release, Digital meter flashes in synchronization so that you enter the output current calibration mode. Step 2,Connected to the load, ammeter in series, adjust the right and left button to change the display of digital meter, so that is consistent with the ammeter display . Wholesale to save you more money! $14.25 $24.07 $27.28 $12.25 10pcs DHT11 Sensor 16x2 HD44780 Blue LCD TowerPro micro servo motor SG90 DC-DC Converter Step Up $10.39 $26.49 $1.79 $10.80 HC-05 Wireless Bluetooth Infrared Wireless Remote PCB SYB-120 PCB BreadBoard HC-SR04 Ultrasonic Module Hot Category in our shop! Discount up to 50%! Payment Shipping Feedback Returns About Us FAQ We accept PAYPAL payment ONLY. All the item(s) will shipped to your PAYPAL ADDRESS. Please update your Latest Detailed, Exact and Precise PAYPAL Address when purchase. (1) Items will be sent out in 1-2 working days when your payment is clear. (2) For US customers,We use E-Packet(China Post), delivered in 7-15 days. For Other countries, We use Singapore/Hongkong Post for Free shipping. Order >= $40, Free Registered Tracking is provided for you. Order