5pcs Dental Wireless Cordless Led Curing Light Lamp 1s Cure Curing

US $349.95

Beijing, China
Jul 16th

Open on mobile:
QR code

Introduction: 1.Technical specifications 1.1Dimensions: 25mm25mm240mm 1.2 Net weight: 280g 1.3 Power source 1.3.1 Power supply: rechargeable Lithium battery 1.3.2 Battery mode: ICR 18490 1.3.3 Battery voltage and capacity: 3.7V/ 1400mAh,Battery has protection against Over-voltage, over-current and short circuit. 1.3.4 Adapter Power Input: 100V to 240V, 50Hz/60 Hz Input Power: 10VA Power Output: DC5V/1A 1.4 Light source: 1.4.1 5W high power blue light LED 1.4.2 Checking method: the LED light is fine when the light is on during operating correctly. 1.4.3 The wave length of this product can match with the clinical dental resin solidification, such as 3M, Dentsply etc. 1.4.4 Wave length: 385nm-515nm 1.5 Light intensity: 1000 mW/c~2300mW/c 2. Operation 2.1 Press the mode button. Following two modes are available. 2.1.1 TURBO Mode: screen shows P1, Press the time button to select of time which could be 1 and 3 seconds.Its output light intensity is about 1800 mW/c-2300mW/cm2 2.1.2 NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5,10 ,15and 20 seconds.Its output light intensity is about 1000 mW/c-1200 mW/c 2.2 During the operation, put the disposable sleeve on the top of the main unit, aim the top at the correct position, press the ON/OFF button and the main unit will produce "Bi" sound, the curing light radiates blue light and starts working according to the set modes. Meanwhile, it starts couting down and will produce tone at every 5 seconds, it stops working when counting down to "0". 2.3 During operation, the blue light can be stopped by press the power button at any time. 2.4 After a working cycle, operator can press the ON/OFF switch to start another working cycle. Stop operating if the equipment began to heat obviously, do not restart until the equipment cool down. Suggest continues working cycle less than 10 times. 2.5 Low power detective circuit is fixed inside of the main unit, when low power is detected, the display screen of main unit will wink, please charge in time. 2.6 When the battery needs to be charged, connect the plug of the adapter into the AC100V~240V power supply. Then connect the output plug of the adapter to the DC 5.0V input plug of the pedestal, and then the logo turn to blue. Put the main unit to the charging point of the pedestal, the display screen turn to scrolling display, and the curing lights starts charging. 2.7 After operating, take off the disposable sleeve and throw away, forbidden to reuse. 2.8 This equipment will turn off automatically if don't any action within 2 minutes, turn it on by press any button. 2.9 The depth of solidification of composite is no less than 2mm per 1 second. 510(K) Number: K192233 Regulation Number: 21 CFR 872.6070 Product Code: EBZ Payment: 1.We accept Paypal only. 2.Payment should be made within 7 days of auctions close. Shipping: 1. The item will be dispatched within 24 hours after payment received in full and cleared. 2. Please make sure your address match the paypal address before you pay. 3. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. 4. Please check your country’s customs office to determine what these additional costs will be prior to bidding/buying. Feedback: 1. Please leave us a Positive Feedback if the product is good. 2. Your feedback is our motivation to develop our business and serve you better. Return & Refund: Return within 60 days is accepted, though the item in good condition. Important Notice For U.S.A Buyer The following FDA Disclaimer is required for all eBay listing in healthcare category: The sale of this item may be subject to regulation by the U.S. Food & Drug Administration and state and local regulatory agencies.You can bid on this item if you are an authorized purchaser. If the item is subject to FDA regulation, We will verify your status as an authorized purchaser of this item before shipping of the item.If you have questions about legal obligations regarding sales of medical devices, you should consult with the FDA's Center for Devices and Radiological Health . (This dental items is not meant to replace your doctor diagnostic. It is mainly for your piece of mind and comfort.)

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Model	LED-B
MPN	Does Not Apply
FDA	K192233
Light Type	LED
Light Source	Blue Light (420nm-480nm)
Brand	Unbranded
Power Supply	Rechargeable Lithium Battery