+ Post new Ad
5pcs Keo Combination Drill Countersink Size: #5/0 Body Diameter: 1/8" 71047870, US $24.99 – Picture 0
5pcs Keo Combination Drill Countersink Size: #5/0 Body Diameter: 1/8" 71047870, US $24.99 – Picture 0

5pcs Keo Combination Drill Countersink Size: #5/0 Body Diameter: 1/8" 71047870

US $24.99

  • Rockford, Illinois, United States
  • Jan 30th
Open on mobile:
QR code
Specs Combination Drill & Countersinks; Trade Size: #5/0; Body Diameter (Inch): 1/8; Drill Point Diameter (Decimal Inch): 0.0100; Drill Point Length (Decimal Inch): 0.0680; Overall Length (Inch): 1-1/4; Included Angle: 60 Trade Size #5/0 Body Diameter (Inch) 1/8 Drill Point Diameter (Decimal Inch) 0.0100 Drill Point Length (Decimal Inch) 0.0680 Overall Length (Inch) 1-1/4 Included Angle 60 End Type Double Cutting Edge Style Radius Combination Drill and Countersink Material High Speed Steel Radius Length (Inch) 1/16 Drill Point Angle 118 Countersink Application Countersinking Combination Drill and Countersink Finish/Coating Bright Long Length Tool (Yes/No) No Cutting Direction Right Hand Aircraft-Style (Yes/No) Yes Insertable Cutter Head (Yes/No) No Tapered (Yes/No) No

Directions

Similar products from Other Drilling Tools

"ACCUPRO" Chip Clearing Twist Drill Bit "N" Size

"ACCUPRO" Chip Clearing Twist Drill Bit "N" Size

  • Coventry, Rhode Island, United States
  • Jan 30th
ALLIED CARBIDE T-A STYLE DRILL INSERT .914" (23.22mm) (1PC)

ALLIED CARBIDE T-A STYLE DRILL INSERT .914" (23.22mm) (1PC)

  • Cadiz, Kentucky, United States
  • Jan 30th
WELDON COUNTERSINKS , LOT OF 9

WELDON COUNTERSINKS , LOT OF 9

  • Berlin, Connecticut, United States
  • Jan 30th
SGS 61035 SER 101M Drill 8.00MM DIN 338 2 FL NEW

SGS 61035 SER 101M Drill 8.00MM DIN 338 2 FL NEW

  • Knoxville, Tennessee, United States
  • Jan 30th
BIMBA D-231-3 CYLINDER ROD END CLEVIS KIT STEEL NOS

BIMBA D-231-3 CYLINDER ROD END CLEVIS KIT STEEL NOS

  • Harlingen, Texas, United States
  • Jan 30th
Milwaukee 49-59-2075 3/4" X 2" High Speed Steel Annular Cutter

Milwaukee 49-59-2075 3/4" X 2" High Speed Steel Annular Cutter

  • Boaz, Alabama, United States
  • Jan 30th
Milwaukee 49-59-2094 15/16" X 2" High Speed Steel Annular Cutter

Milwaukee 49-59-2094 15/16" X 2" High Speed Steel Annular Cutter

  • Boaz, Alabama, United States
  • Jan 30th
Machinists Inserts Lot Of 30

Machinists Inserts Lot Of 30

  • Pampa, Texas, United States
  • Jan 30th
R416.2-0413W32-31 SANDVIK Drill Holder

R416.2-0413W32-31 SANDVIK Drill Holder

  • Windsor, Connecticut, United States
  • Jan 30th
SPADE DRILL HOLDERS AND BITS LOT

SPADE DRILL HOLDERS AND BITS LOT

  • Chapin, Iowa, United States
  • Jan 30th
Meteor precision drill point grinder

Meteor precision drill point grinder

  • Philadelphia, Pennsylvania, United States
  • Jan 30th
AMEC SPADE DRILL #980505-22 REV.0 (BA)

AMEC SPADE DRILL #980505-22 REV.0 (BA)

  • Wadley, Alabama, United States
  • Jan 30th
MACHINIST TOOLS--COMBINED CENTER DRILL (5)

MACHINIST TOOLS--COMBINED CENTER DRILL (5)

  • Atco, New Jersey, United States
  • Jan 30th
NICE LOT OF 11 HSS STRAIGHT SHANK SPOTTING DRILLS 5/16 TO 1" CLE-FORCE

NICE LOT OF 11 HSS STRAIGHT SHANK SPOTTING DRILLS 5/16 TO 1" CLE-FORCE

  • Ellington, New York, United States
  • Jan 30th
AMEC 21MM T.A. Spade Drill Insert 151A-21 Super Cobalt Tialn

AMEC 21MM T.A. Spade Drill Insert 151A-21 Super Cobalt Tialn

  • Houston, Texas, United States
  • Jan 30th
CHAM-Bit 3/8" lot of 2 pcs

CHAM-Bit 3/8" lot of 2 pcs

  • Coventry, Rhode Island, United States
  • Jan 30th
KEO Countersinks lot of 4 Pcs. 2--1/2",1--3/8", 1--1/4" all 90deg

KEO Countersinks lot of 4 Pcs. 2--1/2",1--3/8", 1--1/4" all 90deg

  • Coventry, Rhode Island, United States
  • Jan 30th
7 NEW DRILL BITS JOBBER LENGTH, HSS. PRECISION TWIST USA, BRIGHT FINISH

7 NEW DRILL BITS JOBBER LENGTH, HSS. PRECISION TWIST USA, BRIGHT FINISH

  • Pawtucket, Rhode Island, United States
  • Jan 30th
Drill 1/2 PTD HSS BRASIL 5012 -SET OF 4 DRIILLS

Drill 1/2 PTD HSS BRASIL 5012 -SET OF 4 DRIILLS

  • New Bedford, Massachusetts, United States
  • Jan 30th
Interstate - Drill Blanks 0.0390 | Drill Blank Size (Wire): #61 Lot of 12

Interstate - Drill Blanks 0.0390 | Drill Blank Size (Wire): #61 Lot of 12

  • New Bedford, Massachusetts, United States
  • Jan 30th

People who viewed this item also vieved

NEW YORK TWIST 1/4 F/S SPOT DRILL BIT 24PCS (D955-24)

NEW YORK TWIST 1/4 F/S SPOT DRILL BIT 24PCS (D955-24)

  • Miami, Florida, United States
  • Feb 22nd
NEW YORK TWIST 1-1/8 SLOW SPIRAL DRILL BIT (D943-1)

NEW YORK TWIST 1-1/8 SLOW SPIRAL DRILL BIT (D943-1)

  • Miami, Florida, United States
  • Feb 22nd
NEW YORK TWIST .620 STUB DRILL BIT 6PCS (D952-6)

NEW YORK TWIST .620 STUB DRILL BIT 6PCS (D952-6)

  • Miami, Florida, United States
  • Feb 22nd
Cleveland Twist Drill #3918, 5 pcs #75 Wire Size Drill Bits ((#D266-2c))

Cleveland Twist Drill #3918, 5 pcs #75 Wire Size Drill Bits ((#D266-2c))

  • Green Bay, Wisconsin, United States
  • Feb 25th
Ace Drill 9/32" Solid Carbide Drill Bit 9/32in. 2-3/4" Overall Length 2 Flute

Ace Drill 9/32" Solid Carbide Drill Bit 9/32in. 2-3/4" Overall Length 2 Flute

  • Joppa, Alabama, United States
  • Feb 25th
Cleveland Twist Drill 7pcs #66 Wire Size Print Circuit Board Drill Bits #D265-2c

Cleveland Twist Drill 7pcs #66 Wire Size Print Circuit Board Drill Bits #D265-2c

  • Green Bay, Wisconsin, United States
  • Feb 25th
"CL" Taper Shank Twist Drill Bit 1-3/16"

"CL" Taper Shank Twist Drill Bit 1-3/16"

  • Coventry, Rhode Island, United States
  • Feb 26th
Taper Shank Twistv Drill Bit 1-1/2"

Taper Shank Twistv Drill Bit 1-1/2"

  • Coventry, Rhode Island, United States
  • Feb 26th
NEW 35/64" Taper Shank, HSS bit, #2 MT, Made in USA

NEW 35/64" Taper Shank, HSS bit, #2 MT, Made in USA

  • Marietta, Ohio, United States
  • Feb 26th
MIKRON CrazyDrill Carbide Coolant Drill 3.45mm x 27.3mm x 6 CD.060345.CS [1987]

MIKRON CrazyDrill Carbide Coolant Drill 3.45mm x 27.3mm x 6 CD.060345.CS [1987]

  • Saint Louis, Missouri, United States
  • Feb 27th
MIKRON CrazyDrill Carbide Coolant Drill 2.4mm x 40.4mm x 4mm CD.150240.CS [1987]

MIKRON CrazyDrill Carbide Coolant Drill 2.4mm x 40.4mm x 4mm CD.150240.CS [1987]

  • Saint Louis, Missouri, United States
  • Feb 27th
coolant fed drill bit 53/64" to 29/32" with 1" shaft 7-3/4" long

coolant fed drill bit 53/64" to 29/32" with 1" shaft 7-3/4" long

  • Marshall, Michigan, United States
  • Feb 28th
Lot of 6 Chicago-Latrobe LET U 44191 HSS GP Jobber Length Drill Bits, Unused

Lot of 6 Chicago-Latrobe LET U 44191 HSS GP Jobber Length Drill Bits, Unused

  • Chesterfield, Missouri, United States
  • Mar 8th
"REPUBLIC" Twist Drill Bits # 24 Size, lot of 10 pcs

"REPUBLIC" Twist Drill Bits # 24 Size, lot of 10 pcs

  • Coventry, Rhode Island, United States
  • Mar 8th
"Republic" Twist Drill Bits # 38 Size, lot of 11 Pcs

"Republic" Twist Drill Bits # 38 Size, lot of 11 Pcs

  • Coventry, Rhode Island, United States
  • Mar 8th
5/32(.1562)SOLID CARBIDE STRAIGHT FLUTE140DEG NOTCHED POINT DRILL BIT LOT of 3

5/32(.1562)SOLID CARBIDE STRAIGHT FLUTE140DEG NOTCHED POINT DRILL BIT LOT of 3

  • Largo, Florida, United States
  • May 4th
FULLERTON Carbide Stub Drill 11/32" 2FL 1-1/4" x 3" 17913 <2038>

FULLERTON Carbide Stub Drill 11/32" 2FL 1-1/4" x 3" 17913 <2038>

  • Saint Louis, Missouri, United States
  • May 5th
FULLERTON Carbide Stub Drill 5/8

FULLERTON Carbide Stub Drill 5/8" 2FL 1-1/2" x 3-1/2" 15262 - show original title

  • Saint Louis, Missouri, United States
  • May 5th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies