+ Post new Ad
5th Axis V75100X 75mm x 100mm Metric Vise, US $995.00 – Picture 0
5th Axis V75100X 75mm x 100mm Metric Vise, US $995.00 – Picture 0

5th Axis V75100x 75mm X 100mm Metric Vise

US $995.00

  • Colorado Springs, Colorado, United States
  • Aug 13th
Open on mobile:
QR code
5th Axis V75100X 75mm x 100mm Metric Vise Improved V75100X vs. V75100 New 4 bolt jaw mounting Reduced jaw lift and robust clamping Sharper teeth Better bite Clamping range Specs System Compatibility : 5 Axis Workholding Systems  Product Type : Vise Jaw Width (mm) : 75.00 Jaw Width (Inch) : 3 Jaw Opening Capacity (mm) : 114 Jaw Opening Capacity (Decimal Inch) : 4.5 Jaw Height (mm) : 100.00 Product Length (Inch) : 4 Product Length (mm) : 100.00 Product Width (Inch) : 3 Product Width (mm) : 75.00 Product Height (mm) : 56 Product Height (Decimal Inch) : 2.2100 Throat Depth (Decimal Inch) : 0.83 Throat Depth (mm) : 21.00 Load Capacity (Lb.) : 3600.00 MPN: V75100X
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand 5th Axis
MPN V75100X

Directions

Similar products from Other Workholding Tools

HENRY DISSTON & SONS ,BENCH FILE , AURIFORM, 00 CUT , 3-1/4" x 1/4" , LOT OF 3

HENRY DISSTON & SONS ,BENCH FILE , AURIFORM, 00 CUT , 3-1/4" x 1/4" , LOT OF 3

  • Berlin, Connecticut, United States
  • Aug 14th
HENRY DISSTON & SONS ,BENCH FILE , PIPPIN , 00 CUT , 3-1/4" x 1/4" , LOT OF 3

HENRY DISSTON & SONS ,BENCH FILE , PIPPIN , 00 CUT , 3-1/4" x 1/4" , LOT OF 3

  • Berlin, Connecticut, United States
  • Aug 14th
Spring loaded tap guide or tap follower  made in USA.

Spring loaded tap guide or tap follower  made in USA.

  • Newport, New Hampshire, United States
  • Aug 14th
Spring loaded tap guide or tap follower with two sided tip made in USA

Spring loaded tap guide or tap follower with two sided tip made in USA

  • Newport, New Hampshire, United States
  • Aug 14th
OLDER S J SCULLY JONES QUICK CHUCK

OLDER S J SCULLY JONES QUICK CHUCK

  • Waterford, Michigan, United States
  • Aug 14th
TG100 COLLET EXTENSION W/2 COLLETS 1-1/4" DIA SHANK TG 100 LYNDEX KENNAMETAL

TG100 COLLET EXTENSION W/2 COLLETS 1-1/4" DIA SHANK TG 100 LYNDEX KENNAMETAL

  • North Port, Florida, United States
  • Aug 14th
Samchully SH-10036SCDB Hydraulic Cylinder for Lathe Power Chuck

Samchully SH-10036SCDB Hydraulic Cylinder for Lathe Power Chuck

  • Grosse Pointe, Michigan, United States
  • Aug 14th
Kearney & Trecker Dividing Head With Tailstock

Kearney & Trecker Dividing Head With Tailstock

  • Milwaukee, Wisconsin, United States
  • Aug 14th
MACHINIST MILL LATHE TOOL 4-JAW 9" LATHE CHUCK - STOCK #15206

MACHINIST MILL LATHE TOOL 4-JAW 9" LATHE CHUCK - STOCK #15206

  • Toledo, Ohio, United States
  • Aug 13th
Cushman metal lathe chuck

Cushman metal lathe chuck

  • Smithtown, New York, United States
  • Aug 13th
B-210 - 10" Soft Jaws 4" EXTENDED (3 Pcs) for Kitagawa Samchully Chuck-Steel,

B-210 - 10" Soft Jaws 4" EXTENDED (3 Pcs) for Kitagawa Samchully Chuck-Steel,

  • Coloma, Wisconsin, United States
  • Aug 13th
acme gridley

acme gridley

  • Big Lake, Minnesota, United States
  • Aug 13th
10" Aluminum Soft Jaws 1.5mm x 60° Serrated for B-210 Type Lathe Chucks (2.0 HT)

10" Aluminum Soft Jaws 1.5mm x 60° Serrated for B-210 Type Lathe Chucks (2.0 HT)

  • Coloma, Wisconsin, United States
  • Aug 13th
10" Soft Jaws (3 Pcs) for Kitagawa B-210, Samchully Chuck-Steel, 3 SETS

10" Soft Jaws (3 Pcs) for Kitagawa B-210, Samchully Chuck-Steel, 3 SETS

  • Coloma, Wisconsin, United States
  • Aug 13th
1200S8 8Inch Lightduty Fclamp 86130

1200S8 8Inch Lightduty Fclamp 86130

  • Joliet, Illinois, United States
  • Aug 13th
Good Hand (GH-13007) Vertical Handle Toggle Clamps NEW - Lot Of 2

Good Hand (GH-13007) Vertical Handle Toggle Clamps NEW - Lot Of 2

  • Farmington, Missouri, United States
  • Aug 13th
22J Collets Hardinge

22J Collets Hardinge

  • Stafford, Virginia, United States
  • Aug 13th
Heinrich Tools Vise Clamp Machinists Tool

Heinrich Tools Vise Clamp Machinists Tool

  • Van Buren, Ohio, United States
  • Aug 13th
LOT OF 4 VINTAGE THE GLOBE MACHINE & STAMP MFG CO HEAVY SERVICE C-CLAMPS ~ USA

LOT OF 4 VINTAGE THE GLOBE MACHINE & STAMP MFG CO HEAVY SERVICE C-CLAMPS ~ USA

  • Mechanicsburg, Pennsylvania, United States
  • Aug 13th
Kevothermal CR28AVP1EC R-A Vacuum Insulation Panel 400mm x 400mm

Kevothermal CR28AVP1EC R-A Vacuum Insulation Panel 400mm x 400mm

  • Topeka, Kansas, United States
  • Aug 13th

People who viewed this item also vieved

Machinists 12/5D BUY NOW USA Magnetic Transfer Pad for grinding

Machinists 12/5D BUY NOW USA Magnetic Transfer Pad for grinding

  • Lutz, Florida, United States
  • Jan 30th
V Block,Taft-Peirce Style No. 9130 Machinist V Block & Clamp & Screws, USA

V Block,Taft-Peirce Style No. 9130 Machinist V Block & Clamp & Screws, USA

  • Saunderstown, Rhode Island, United States
  • Jan 30th
Brown & Sharpe Magnetic Chuck Transferring V-Blocks - No. 756

Brown & Sharpe Magnetic Chuck Transferring V-Blocks - No. 756

  • Old Hickory, Tennessee, United States
  • Jan 30th
Machinists 12/5B BUY NOW Machinists Unused MT4 x MT5 ADAPTER

Machinists 12/5B BUY NOW Machinists Unused MT4 x MT5 ADAPTER

  • Lutz, Florida, United States
  • Jan 30th
Machinists 12/5B BUY NOW Machinists Unusedv MT4 x MT3 ADAPTER

Machinists 12/5B BUY NOW Machinists Unusedv MT4 x MT3 ADAPTER

  • Lutz, Florida, United States
  • Jan 30th
Cupped Live Center For Wood Lathe MT1 Better Grip Prevent Splitting Mill Shaper

Cupped Live Center For Wood Lathe MT1 Better Grip Prevent Splitting Mill Shaper

  • United States
  • Jan 30th
NEW ATLAS PRATT BURNERED 16 INCH 4 JAW CHUCK LEBLOND CLAUSING MAKINO INDEPENDENT

NEW ATLAS PRATT BURNERED 16 INCH 4 JAW CHUCK LEBLOND CLAUSING MAKINO INDEPENDENT

  • Lake Orion, Michigan, United States
  • Jan 30th
UNUSED 60" 4-JAW FACE PLATE CHUCK FOR LATHE / VTL PLAIN BACK W/ T-SLOTS

UNUSED 60" 4-JAW FACE PLATE CHUCK FOR LATHE / VTL PLAIN BACK W/ T-SLOTS

  • Cleveland, Ohio, United States
  • Jan 30th
Like new SANDVIK Boring Head, C5-391.37A-12048A Capto

Like new SANDVIK Boring Head, C5-391.37A-12048A Capto

  • valleyfield, Canada
  • Jan 30th
1pcs New Toggle Clamp 102BSS

1pcs New Toggle Clamp 102BSS

  • Nanjing Jiangsu , China
  • Jan 30th
1pcs New Toggle Clamp 431SS

1pcs New Toggle Clamp 431SS

  • Nanjing Jiangsu , China
  • Jan 30th
Vintage Lot Of 3 Parallel Clamps 2" Opening Tool Maker Made

Vintage Lot Of 3 Parallel Clamps 2" Opening Tool Maker Made

  • Yorktown, Indiana, United States
  • Jan 30th
Lyndex B4007-0011 Collet Chuck w/Pull Stud, Good Cond, Used, Bin 15

Lyndex B4007-0011 Collet Chuck w/Pull Stud, Good Cond, Used, Bin 15

  • Spokane, Washington, United States
  • Jan 30th
16 Pc angle Drill Collet Set - Aircraft, Aviation Tools

16 Pc angle Drill Collet Set - Aircraft, Aviation Tools

  • Kernersville, North Carolina, United States
  • Jan 30th
UNIVERSAL ENGINEERING KWIK SWITCH 300 COLLET CHUCK 30-ZZ

UNIVERSAL ENGINEERING KWIK SWITCH 300 COLLET CHUCK 30-ZZ

  • Wadley, Alabama, United States
  • Jan 30th
VDF 10-0391 25/64 TG Style Collet Valenite Brand 1pc

VDF 10-0391 25/64 TG Style Collet Valenite Brand 1pc

  • Trenton, Michigan, United States
  • Jan 30th
100TG-0765 49/64 TG Collet Erickson Brand 1pc

100TG-0765 49/64 TG Collet Erickson Brand 1pc

  • Trenton, Michigan, United States
  • Jan 30th
100TG-0484 31/64 TG Collet Erickson Brand 1pc

100TG-0484 31/64 TG Collet Erickson Brand 1pc

  • Trenton, Michigan, United States
  • Jan 30th
CAST ANGLE PLATE 4" x 4" x 4" MACHINERY TOOL - LAYOUT TOOL - INSPECTION TOOL

CAST ANGLE PLATE 4" x 4" x 4" MACHINERY TOOL - LAYOUT TOOL - INSPECTION TOOL

  • Emmaus, Pennsylvania, United States
  • Jan 30th
5c indexer gess wut "made in china"

5c indexer gess wut "made in china"

  • Milford, Delaware, United States
  • Jan 30th
Machinist Right Angle Iron 2151-1601

Machinist Right Angle Iron 2151-1601

  • Salinas, California, United States
  • Jan 30th
BROWN & SHARPE NO 40 TOOL HOLDER 40 TAPER

BROWN & SHARPE NO 40 TOOL HOLDER 40 TAPER

  • Archbold, Ohio, United States
  • Jan 30th
TROYKE 15" ROTARY TABLE MODEL R-15

TROYKE 15" ROTARY TABLE MODEL R-15

  • Wadley, Alabama, United States
  • Jan 30th
Nikken Multi Lock Milling Chuck MCA50F-32H SL

Nikken Multi Lock Milling Chuck MCA50F-32H SL

  • Archbold, Ohio, United States
  • Jan 30th
Vintage Wilton 820 Baby Bullet Machinist Bench Swivel Vise With Powrarm Junior

Vintage Wilton 820 Baby Bullet Machinist Bench Swivel Vise With Powrarm Junior

  • Geneva, Illinois, United States
  • Jan 30th
2 VINTAGE BRASS VISE JAW COVERS FOR A MORGAN VISE 4'' BRASS

2 VINTAGE BRASS VISE JAW COVERS FOR A MORGAN VISE 4'' BRASS

  • Elgin, Illinois, United States
  • Jan 30th
Gently used Vintage 2 1/2" Craftsman Industrial Angle Vise

Gently used Vintage 2 1/2" Craftsman Industrial Angle Vise

  • La Porte, Texas, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies