+ Post new Ad
6" KURT ANGLOCK MILL VISE WORK STOP 3/4" JAW NEW USA MADE, US $10.00 – Picture 0
6" KURT ANGLOCK MILL VISE WORK STOP 3/4" JAW NEW USA MADE, US $10.00 – Picture 1
6" KURT ANGLOCK MILL VISE WORK STOP 3/4" JAW NEW USA MADE, US $10.00 – Picture 2
6" KURT ANGLOCK MILL VISE WORK STOP 3/4" JAW NEW USA MADE, US $10.00 – Picture 0
6" KURT ANGLOCK MILL VISE WORK STOP 3/4" JAW NEW USA MADE, US $10.00 – Picture 1
6" KURT ANGLOCK MILL VISE WORK STOP 3/4" JAW NEW USA MADE, US $10.00 – Picture 2

6" Kurt Anglock Mill Vise Work Stop 3/4" Jaw New Usa Made

US $10.00

  • Corona, California, United States
  • Jan 30th
Open on mobile:
QR code
These are new USA Made 3/4" mill vise work stops. I manufacture these and sell therm to SPI, ENCO, MSC you can look up in their catalogs and see them. These fit 99% of all the mill vises, like Kurt, SPI Chinese, etc.These are a new better design the screws now clamp from the side eliminating that little ball and it clamps much tighter now. With the new design you have more surface pressure on the jaw. A good way to test these is see if you can pull it off by hand after you have tightened it down. The ball ones would come right off these wont. These sell for $24.95 in all the catalogs sometimes on sale for $19.95 get them here for more then 50% Off.  A great gift for your shop buddies.  100% guaranteed to be the best vise stop on the market and will last forever. You can almost get 1 for the price of 2, Free Shipping also  Instruction for use. Tighten each screw a little at a time till both are snug then tighten till  the screw till it stops and your done. Do not tighten one screw till its tight and then the other it will still work but the stop wont be parallel to the jaw.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Kurt
MPN 70-950-1
Brand Machinist & Metalworker

Directions

Similar products from Grips & Tongs

STANLEY Machinest Vise - 2.250 Inch Draw - VGC In Box

STANLEY Machinest Vise - 2.250 Inch Draw - VGC In Box

  • Andreas, Pennsylvania, United States
  • Jan 30th
VINTAGE WILTON BABY BULLET JEWELERS VISE 2" JAWS W/POWRARM JR

VINTAGE WILTON BABY BULLET JEWELERS VISE 2" JAWS W/POWRARM JR

  • Grants Pass, Oregon, United States
  • Jan 30th
Little Giant 5494 3" Vise with Rotating Base & Anvil

Little Giant 5494 3" Vise with Rotating Base & Anvil

  • Lena, Illinois, United States
  • Jan 30th
MACHINIST GRINDING VISE 5-1/2" long 2" wide 2" tall, weighs 3 lb. 4 oz. *J

MACHINIST GRINDING VISE 5-1/2" long 2" wide 2" tall, weighs 3 lb. 4 oz. *J

  • Thomaston, Connecticut, United States
  • Jan 30th
Local Pickup Only NEW Kurt D688 milling machine 6" wide Jaws Precision Mill Vise

Local Pickup Only NEW Kurt D688 milling machine 6" wide Jaws Precision Mill Vise

  • Grand Rapids, Michigan, United States
  • Jan 30th
Wilton Bullet Vise

Wilton Bullet Vise

  • San Francisco, California, United States
  • Jan 30th
Vintage Wilton 3 1/2 Inch Swivel Vise Good Condition!

Vintage Wilton 3 1/2 Inch Swivel Vise Good Condition!

  • Bennington, Kansas, United States
  • Jan 30th
VINTAGE WILTON BABY BULLET VISE 2" JAWS MADE IN CHICAGO, IL

VINTAGE WILTON BABY BULLET VISE 2" JAWS MADE IN CHICAGO, IL

  • Saint Charles, Missouri, United States
  • Jan 30th
wilton 141031 speed vise

wilton 141031 speed vise

  • Hillsboro, Illinois, United States
  • Jan 30th
USED SUPERMAX MADE IN TAIWAN VISE OPENS 4-1/4" JAWS 6"

USED SUPERMAX MADE IN TAIWAN VISE OPENS 4-1/4" JAWS 6"

  • San Bernardino, California, United States
  • Jan 30th
PRECISION MILLING VISE, 6" Jaw Width, 1-1/2" Jaw Depth, 5.90" Jaw Opening,/KU4/

PRECISION MILLING VISE, 6" Jaw Width, 1-1/2" Jaw Depth, 5.90" Jaw Opening,/KU4/

  • Saint Louis, Missouri, United States
  • Jan 30th
Bridgeport Milling Machine Vise - 6" Wide

Bridgeport Milling Machine Vise - 6" Wide

  • New Lenox, Illinois, United States
  • Jan 30th
Starrett 2" Vise #160 a perfect pair

Starrett 2" Vise #160 a perfect pair

  • Hopatcong, New Jersey, United States
  • Jan 30th
Eagle Rock Technologies A1-21200 5C AIR COLLET FIXTURE PN #09148255 USED

Eagle Rock Technologies A1-21200 5C AIR COLLET FIXTURE PN #09148255 USED

  • Gilbert, Arizona, United States
  • Jan 30th
Machinist Hand Vise Made in USA Vintage tool file holder grinding tooling bit

Machinist Hand Vise Made in USA Vintage tool file holder grinding tooling bit

  • Windsor, Virginia, United States
  • Jan 30th
5/8" T Slot Mill Drill Press Steel Table 13" x 16" T Bolt Slotted Base Plate

5/8" T Slot Mill Drill Press Steel Table 13" x 16" T Bolt Slotted Base Plate

  • Grand Rapids, Michigan, United States
  • Jan 30th
small new 2.5" DRILL PRESS VISE / CLAMP

small new 2.5" DRILL PRESS VISE / CLAMP

  • Mansfield, Arkansas, United States
  • Jan 30th
Kurt D60-1 Workholding Ironclad AngLock Vise with handle

Kurt D60-1 Workholding Ironclad AngLock Vise with handle

  • Anaheim, California, United States
  • Jan 30th
Four Inch Cast Iron Flat Machinist Vice Slotted Holes -Drill Press Drilling Etc.

Four Inch Cast Iron Flat Machinist Vice Slotted Holes -Drill Press Drilling Etc.

  • West Chester, Pennsylvania, United States
  • Jan 30th
wilton machinist vise

wilton machinist vise

  • Cleveland, Tennessee, United States
  • Jan 30th

People who viewed this item also vieved

(5) CLEAN KENNAMETAL ERICKSON "G" STYLE TAP COLLETS GTC CNC tapping

(5) CLEAN KENNAMETAL ERICKSON "G" STYLE TAP COLLETS GTC CNC tapping

  • Hopkins, Minnesota, United States
  • Feb 28th
(3) Clean KENNAMETAL ERICKSON "G" STYLE TAP COLLETS GTC tapping cnc

(3) Clean KENNAMETAL ERICKSON "G" STYLE TAP COLLETS GTC tapping cnc

  • Hopkins, Minnesota, United States
  • Feb 28th
(9) Clean Bilz Command #2 XTC2 Tap Collets, Tapping, Compression, CNC quick

(9) Clean Bilz Command #2 XTC2 Tap Collets, Tapping, Compression, CNC quick

  • Hopkins, Minnesota, United States
  • Feb 28th
YUASA 550-007 ACCU-DEX 8" HORIZONTAL VERTICAL ROTARY SUPER SPACER 3 JAW CHUCK

YUASA 550-007 ACCU-DEX 8" HORIZONTAL VERTICAL ROTARY SUPER SPACER 3 JAW CHUCK

  • Ellington, New York, United States
  • Feb 28th
NICE! SIMCO MICRO-GRIND 5C COLLET INDEXING FIXTURE FOR MILLING GRINDING

NICE! SIMCO MICRO-GRIND 5C COLLET INDEXING FIXTURE FOR MILLING GRINDING

  • El Monte, California, United States
  • Feb 28th
Precision Ground Semi Steel Right Angle 418-4240 6" x 6" x 8" Iron 4P NIB (B16)

Precision Ground Semi Steel Right Angle 418-4240 6" x 6" x 8" Iron 4P NIB (B16)

  • Springfield, Illinois, United States
  • Feb 28th
Vulcan "U" Clamp Model 112

Vulcan "U" Clamp Model 112

  • Tarzana, California, United States
  • Mar 5th
B-LINE BFV2010 1" Black Non-Metallic Pipe Clamp - New With Screw and nut!

B-LINE BFV2010 1" Black Non-Metallic Pipe Clamp - New With Screw and nut!

  • Wethersfield, Connecticut, United States
  • Mar 5th
KANT TWIST 6F QUICK ACTING HOLD DOWN CLAMP WITH "T" SLOT BASE & BOLT 6"

KANT TWIST 6F QUICK ACTING HOLD DOWN CLAMP WITH "T" SLOT BASE & BOLT 6"

  • Arlington Heights, Illinois, United States
  • Mar 5th
SMW Autoblok 8" lathe chuck used 2 months switched to collets, manuals avail,

SMW Autoblok 8" lathe chuck used 2 months switched to collets, manuals avail,

  • Auburn Hills, Michigan, United States
  • Mar 6th
JT2 1/2 JACOBS DIAMETER TAPPER CHUCK JT2 1-10MM .

JT2 1/2 JACOBS DIAMETER TAPPER CHUCK JT2 1-10MM .

  • United States
  • Mar 6th
KITAGAWA B-10 10" CNC LATHE POWER CHUCK B10 W/ A1-8 MOUNT - OKUMA

KITAGAWA B-10 10" CNC LATHE POWER CHUCK B10 W/ A1-8 MOUNT - OKUMA

  • Chino, California, United States
  • Mar 6th
***Toolmakers 4 pc Magnetic V-Block Set ***

***Toolmakers 4 pc Magnetic V-Block Set ***

  • Naperville, Illinois, United States
  • Mar 25th
craftsman lathe ,WORK ARBOR ,MT,2

craftsman lathe ,WORK ARBOR ,MT,2

  • Lowry City, Missouri, United States
  • Mar 25th
Centers for a Small Lathe - #1 Morse Taper

Centers for a Small Lathe - #1 Morse Taper

  • North Fort Myers, Florida, United States
  • Mar 25th
Destaco FL-160 Variable Stroke Plunger Clamp w/Front Flange Mount Body-Sweden

Destaco FL-160 Variable Stroke Plunger Clamp w/Front Flange Mount Body-Sweden

  • Erie, Pennsylvania, United States
  • May 24th
Jacobs U11N Replacement Jaws & Nut Set

Jacobs U11N Replacement Jaws & Nut Set

  • Garden City, Idaho, United States
  • May 24th
Vintage Metal Lathe #1-L Tool Holder W/ 1/4" Bit Right Made in KOREA

Vintage Metal Lathe #1-L Tool Holder W/ 1/4" Bit Right Made in KOREA

  • Antioch, California, United States
  • May 24th
13’-4” Power Rotary Table – Large Heavy Duty

13’-4” Power Rotary Table – Large Heavy Duty

  • Tracy, California, United States
  • May 29th
Fibro Index Table - FIBROPLAN NC ROTARY TABLE, 420mm, NC 1.04.0420.2.1.04.01

Fibro Index Table - FIBROPLAN NC ROTARY TABLE, 420mm, NC 1.04.0420.2.1.04.01

  • Jackson, Michigan, United States
  • May 29th
#DL-10-B-MT TROYKE 10" Vertical CNC Rotary Table (New 2002)

#DL-10-B-MT TROYKE 10" Vertical CNC Rotary Table (New 2002)

  • Hauppauge, New York, United States
  • May 29th
Procheck MACHINIST PARALLELS SET Z9980B Straight edge, Machine tooling parts

Procheck MACHINIST PARALLELS SET Z9980B Straight edge, Machine tooling parts

  • Houston, Texas, United States
  • May 29th
BROWN & SHARPE #750A MACHINIST V BLOCKS B&S

BROWN & SHARPE #750A MACHINIST V BLOCKS B&S

  • Hatboro, Pennsylvania, United States
  • May 29th
MACHINIST MADE 1 2 6 BLOCKS

MACHINIST MADE 1 2 6 BLOCKS

  • Newbury, Ohio, United States
  • May 29th
TECHNIKS BT30 x ER16 M-70 SYIC 16308 COLLET HOLDER G2.5 RPM 18000

TECHNIKS BT30 x ER16 M-70 SYIC 16308 COLLET HOLDER G2.5 RPM 18000

  • Santa Clarita, California, United States
  • Jun 2nd
Hardinge SJOGREN Speed Chuck 2A-D3

Hardinge SJOGREN Speed Chuck 2A-D3

  • Rockford, Illinois, United States
  • Jun 3rd
25 Pc. Techniks CAT 40 ER 32 CNC 25K Chucks Kit-18 x Coolant Collet Set,Wrench

25 Pc. Techniks CAT 40 ER 32 CNC 25K Chucks Kit-18 x Coolant Collet Set,Wrench

  • Hamden, Connecticut, United States
  • Jun 3rd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies