+ Post new Ad
6 Low Current Nozzles for 50 Amp Plasma Arc Cutting Torches 4454, US $20.00 – Picture 0
6 Low Current Nozzles for 50 Amp Plasma Arc Cutting Torches 4454, US $20.00 – Picture 0

6 Low Current Nozzles For 50 Amp Plasma Arc Cutting Torches 4454

US $20.00

  • Logan, Utah, United States
  • Feb 24th
Open on mobile:
QR code
2 Packages of 3 Low Current Nozzles (Part No. 4454)For use on 50 AMP Plasma Arc Cutting Torches Plasma cutting nozzles direct the high pressure air cutting stream into a fine column of ionized gas. Nozzles are subject to wear, allowing the cutting arc to wander or get wider than normal. These nozzles, manufactured from the finest materials to assure long and reliable performance, are suitable for use on the following plasma cutters on the higher current output settings: Solar 2050 Century 50 amp Dayton 50 amp Powermate 82050 334-295-905 830-266-016
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
MPN 4454
UPC 010271005734

Directions

Similar products from Other Cutting Equipment & Expendables

(5) Five Counter Sinks - Deburring Tools / Set - 82 Degree

(5) Five Counter Sinks - Deburring Tools / Set - 82 Degree

  • Milwaukee, Wisconsin, United States
  • Feb 25th
NEW INVOLUTE GEAR CUTTER #5 10P 21-25T 7/8"bore HS BROWN AND SHARPE

NEW INVOLUTE GEAR CUTTER #5 10P 21-25T 7/8"bore HS BROWN AND SHARPE

  • Kelly, North Carolina, United States
  • Feb 25th
1/2" SHANK HIGH SPEED HS WOODRUFF KEYSEAT KEYWAY CUTTER LATHE 1/4" WIDE USA

1/2" SHANK HIGH SPEED HS WOODRUFF KEYSEAT KEYWAY CUTTER LATHE 1/4" WIDE USA

  • Danville, New Hampshire, United States
  • Feb 25th
RIDGID T-403/92485 P-Trap Cutter, 3 In, For 1ATH5, 3FE63, 4CX14

RIDGID T-403/92485 P-Trap Cutter, 3 In, For 1ATH5, 3FE63, 4CX14

  • Ephrata, Pennsylvania, United States
  • Feb 25th
1/16 4FL Carbide OAL 1.5 HTC SE End Mill

1/16 4FL Carbide OAL 1.5 HTC SE End Mill

  • Santa Ana, California, United States
  • Feb 24th
CARBIDE COUNTERSINK 1/2 " 82 degree Single flute Made in U.S.A.

CARBIDE COUNTERSINK 1/2 " 82 degree Single flute Made in U.S.A.

  • Highland Park, New Jersey, United States
  • Feb 24th
Machine Shop Cutting Tools & Cosumables Large Lot 45 lbs.

Machine Shop Cutting Tools & Cosumables Large Lot 45 lbs.

  • Gilbert, Arizona, United States
  • Feb 24th
Dremel MM820 Assist Handle Kit

Dremel MM820 Assist Handle Kit

  • Las Vegas, Nevada, United States
  • Feb 24th
Vintage Wiss Snip A 10 Drop Forged Solid Steel Made IN USA

Vintage Wiss Snip A 10 Drop Forged Solid Steel Made IN USA

  • Spring Hill, Florida, United States
  • Feb 24th
6 High Current Nozzles for 50 Amp Plasma Arc Cutting Torches 4451

6 High Current Nozzles for 50 Amp Plasma Arc Cutting Torches 4451

  • Logan, Utah, United States
  • Feb 24th
JANCY SL625 5/8" X 2" ANNULAR CUTTER

JANCY SL625 5/8" X 2" ANNULAR CUTTER

  • Davenport, Iowa, United States
  • Feb 24th
5/16-36 H3 4 Flute Plug Hand Tap M2 High Speed Steel TMX Toolmex #5-750-5452

5/16-36 H3 4 Flute Plug Hand Tap M2 High Speed Steel TMX Toolmex #5-750-5452

  • Seminole, Florida, United States
  • Feb 24th
3/8-16 Round Adjustable Split Threading Die 1" OD Toolmex #5-800-065

3/8-16 Round Adjustable Split Threading Die 1" OD Toolmex #5-800-065

  • Seminole, Florida, United States
  • Feb 24th
JANCY SJS000 SHORTCUT CUTTER SET

JANCY SJS000 SHORTCUT CUTTER SET

  • Davenport, Iowa, United States
  • Feb 24th
NMTB 50 Weldon 5/8" end mill holder

NMTB 50 Weldon 5/8" end mill holder

  • Goldvein, Virginia, United States
  • Feb 24th
NMTB 50 Collet Holder with 7/8" collet

NMTB 50 Collet Holder with 7/8" collet

  • Goldvein, Virginia, United States
  • Feb 24th
NMTB 50 Face MIll 4 Inch

NMTB 50 Face MIll 4 Inch

  • Goldvein, Virginia, United States
  • Feb 24th
NMTB 50 Boring Head Flynn MFG

NMTB 50 Boring Head Flynn MFG

  • Yorktown, Virginia, United States
  • Feb 24th
Mango Shaviv Deburring Tool w/ Ten Pack of E200 HSS Blades. All New

Mango Shaviv Deburring Tool w/ Ten Pack of E200 HSS Blades. All New

  • Greensburg, Indiana, United States
  • Feb 24th
MT5 Boring Head Enco MFG

MT5 Boring Head Enco MFG

  • Yorktown, Virginia, United States
  • Feb 24th

People who viewed this item also vieved

3/8 D KEYWAY BROACH DUMONT MINUTEMAN USA LOT OF TWO

3/8 D KEYWAY BROACH DUMONT MINUTEMAN USA LOT OF TWO

  • East Brunswick, New Jersey, United States
  • Jan 30th
3/8 C KEYWAY BROACH DUMONT MINUTEMAN USA

3/8 C KEYWAY BROACH DUMONT MINUTEMAN USA

  • East Brunswick, New Jersey, United States
  • Jan 30th
10 pcs NEW VALENITE TPMR-222-2A CARBIDE INSERTS.

10 pcs NEW VALENITE TPMR-222-2A CARBIDE INSERTS.

  • Midway City, California, United States
  • Jan 30th
SANDVIK N151.2-500-5E 235 CARBIDE INSERT 6 PCS

SANDVIK N151.2-500-5E 235 CARBIDE INSERT 6 PCS

  • Santa Rosa, California, United States
  • Jan 30th
NTK Ceramic Inserts VGW-8344-2Z0220 WA1 Qty 10 [798]

NTK Ceramic Inserts VGW-8344-2Z0220 WA1 Qty 10 [798]

  • Saint Louis, Missouri, United States
  • Jan 30th
NTK Ceramic Turning Inserts RNG55-E02 WA1 Qty 8 [798]

NTK Ceramic Turning Inserts RNG55-E02 WA1 Qty 8 [798]

  • Saint Louis, Missouri, United States
  • Jan 30th
5/64 2 FLUTE CARBIDE BALL END MILL .125 LOC

5/64 2 FLUTE CARBIDE BALL END MILL .125 LOC

  • San Carlos, California, United States
  • Jan 30th
Supermill 1/2"x1" 7 FL High Perf. Carbide End Mill-Titanium,Heat Treat. Material

Supermill 1/2"x1" 7 FL High Perf. Carbide End Mill-Titanium,Heat Treat. Material

  • Hamden, Connecticut, United States
  • Jan 30th
Punch press adaptor 2" inch to 1" inch Diacro

Punch press adaptor 2" inch to 1" inch Diacro

  • Queen Creek, Arizona, United States
  • Jan 30th
Punch Die Set .100" .500" 53 Degree Rectangle Shape Diacro 906/212B Shank .625"

Punch Die Set .100" .500" 53 Degree Rectangle Shape Diacro 906/212B Shank .625"

  • Queen Creek, Arizona, United States
  • Jan 30th
Chucking Reamer .3281 Straight Flute 6" OAL HSS USA

Chucking Reamer .3281 Straight Flute 6" OAL HSS USA

  • Milton Freewater, Oregon, United States
  • Jan 30th
Hand Reamer 17/32 Straight Flute HSS USA

Hand Reamer 17/32 Straight Flute HSS USA

  • Milton Freewater, Oregon, United States
  • Jan 30th
Bridgeport Milling Machine, Up to # 1200, Operations parts Manual 1948

Bridgeport Milling Machine, Up to # 1200, Operations parts Manual 1948

  • Winnetka, California, United States
  • Jan 30th
Chicago Dreis & Krump, AB CL ME & D, Mechanical Press Brake, Repair Parts Manual

Chicago Dreis & Krump, AB CL ME & D, Mechanical Press Brake, Repair Parts Manual

  • Winnetka, California, United States
  • Jan 30th
120 Piece 1/4-28 Threaded Drill Bit Lot - New - USA Made

120 Piece 1/4-28 Threaded Drill Bit Lot - New - USA Made

  • San Antonio, Texas, United States
  • Jan 30th
American Made Michigan Drill 5/8" Super Cobalt Drill Bit .... (5-4-2)

American Made Michigan Drill 5/8" Super Cobalt Drill Bit .... (5-4-2)

  • San Antonio, Texas, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies