6 weld neck flange for sale, brand-new and used.

This is a 2" Stainless Steel Pipe Flange. The steel is F304L with a weld neck 1 9/16" long. Material - F304L Schedule - 40 Class - 150 Bolt Hole Diameter - 4.75 inches Bolt Hole Size - 5/8 inches Flange OD - 6 inches Flange ID - 2 inches Maximum Working Pressure - 150 PSI Specification Met - ASTM A182 , ASME SA182

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16", with knurled nuts, and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of standard sized, aluminum, "2 hole" pins. One pin has a level vial for easy vertical leveling, and comes with a 360° vial that just "snaps" in for easy replacement. These are also spot faced 15/16" I.D.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Now with Knurled nuts! Hi, up for sale is one lot of 5 sets of 1-1/8 inch O.D., aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16", and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These will fit small holed flanges, like Duct work Etc., and pipe up to 12" on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. Even 1/2" pipe has 5/8" holes, so these will fit 1/2" pipe up to 12" pipe on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes fro1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These are turned, and tapered on the threads for EXTREME accuracy, and the threads are tapered on the end with the lathe, and are spot faced on the end for 3/4" decals, which are High Quality, and U.V resistant, polymer domed. These will ship in a 3X3X2 inch, tuck top box.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These are turned, and tapered on the threads for EXTREME accuracy, and the threads are tapered on the end with the lathe, and are spot faced on the end for 3/4" decals, which are High Quality, and U.V resistant, polymer domed. These will ship in a 3X3X2 inch, tuck top box.

PSI is the premier manufacturer of pipe flanges on the East Coast. We use all domestic steel when making our flanges. All products are machined in our state of the art machine shop in Williamstown, NJ with full inspection.

1 1/4 ” 1500 Weld Neck Flange A/SA182 SCH 80 B16.5 WNRF F316/F316L You are bidding on a

1/2 ” 1500 Weld Neck Flange A182/SA182 SCH 160 B16.5 WNRF F316/F316L You are bidding on a

1 1/4 ” 1500 Weld Neck Flange SCH 80 1500 A/SA 182 WNRF B16.5