6" X 5" Propane Furnace Kit: 2 Torchs, 2 Hoses, Tank T, Crucible, Molds (2014d)

US $8800

Springfield, Oregon, United States
Jan 30th

Open on mobile:
QR code

6" X 5" Propane Furnace Kit: 2 Torchs, 2 Hoses, Tank T, Crucible, Molds (2014D) Description You Are Bidding On One New 6" Diameter Two Propane Torch Fired Furnace. Total Height Of This Furnace is 6.5 Inches Tall With Top On. I Build These Small Furnaces In My Shop. The Torch Holders Will Accept Bernz-O-Matic Style Air/Propane Or Air/Mapp Torches. The Bore Of The Holder Will Accept A 5/8" Torch Tip Or Smaller. This Furnace Is Fabricated From 6" Round H.R.E.W.Tubing. Also Included In This Auction Are Two Bernz-O-Matic JT539T Torch Heads, Two Bernz-O-Matic 59 Inch Propane Hoses, One Coleman Tank "T", A Port Plug For Closing Off The Unused Port, One #1 Clay/Graphite Crucible,Two Stirring Stix, One 2 Ozt Open Pour Mold, One 1 Ozt. Open Pour Mold, A Three Mold Vertical Pour Set With HD Clamp And I Ounce Of Anhydrous Borax . No Propane Tank Comes With The Auction. Minimum Torch Requirements: 10,000 BTU Or Higher For Sterling And Fine Silver. 20,000 BTU Or Higher For Gold And Copper. Setup DVD Will Come With The Kit. The Video Will Also Be Posted On My Youtube Channel. See This Type Furnace In Action. Go To Youtube And Search: 6 Inch Propane Furnace Setup. And: 6 Inch Propane Furnace Operation FIRE................ Have your Fire Extinguisher At The Ready...It Really Sucks To Be Looking For One During A Fire! Always Wear Your Protective Equipment When Using Torches Or Furnaces. Note: The Furnaces In The Older Videos Are The Early Units, They Work Exactly The Same. Warning: The furnace will become hot when in use. Use adequate spacing between furnace and any combustible materials. Do not operate furnace unattended, flame may become extinguished and allow gas vapor to build. Use common sense. Use the items as you feel safe doing. These Are Great Items And I Use Them To Recover Scrap Gold And Silver From Jewelry. The Pictures Of The Items In Use Are For Demonstration Purposes Only. You Will Receive New Items. I Manufacture The Furnace,Tongs And Graphite Items In My Shop And They Are Fabricated From All New Materials. They Are "New". The Tools,Furnaces And Crucibles Seen In The Pictures Are Not Part Of The Auction. They Are For Demonstration Purposes Only. Some Of The Pictures Are Molds In Use, Similar But Not The Molds In The Auction. They Work Exactly The Same. Technical Data: 6 Inch Furnace: Outside Diameter: 6.011" (+/-) Approximate Inside Diameter: 4.610" (+/-) Outside Height: 5.125"(+/-) Outside Height With Top: 6.500"(+/-) Max. Torch Tip Diameter: .625" (+/-) Diameter Of Top Cap: 6.011"(+/-) Inside Bottom Diameter Of Top Cap Exhaust Port: 3.375" (+/-) Inside Top Diameter Of Top Cap Exhaust Port: 2.750" (+/-) Handel Length 5 "(+/-) Refractory Material: Kaowool Ceramic Fiber Treatment For Kaowool: Refractory Rigidizeer Liquid. 2ea. JT539T Torch Heads Picture #2 2ea. 59 Inch Bernz-O-Matic Propane Hoses Picture #3 1ea. Coleman Propane "T" Picture #4 #1 Clay/Graphite Crucible (Picture #8) Overall Height: 3..25” (+/-) Outside Diameter: 2.705” (+/-) Inside Diameter At Top: 1.956” (+/-) Inside Diameter At Bottom: 1.100” (+/-) Wall Thickness At Top: 0.396” (+/-) Max. Temp. For These Are: 2,300 Degrees F (Fahrenheit) 2 Ozt. Left Mold, Picture #16 Overall Outside Length : 2.201” (+/-) Overall Outside Width : 1.700” (+/-) Overall Thickness: .545" (+/-) Mold Cavity Length : 1.550” (+/-) Mold Cavity Width : .640” (+/-) Mold Cavity Depth: .333" (+/-) 1 Ozt. Right Mold, Picture #16 Overall Outside Length : 2.201” (+/-) Overall Outside Width : 1.700” (+/-) Overall Thickness: .545" (+/-) Mold Cavity Length : 1.550” (+/-) Mold Cavity Width : .650” (+/-) Mold Cavity Depth: .181" (+/-) Carbon Graphite Stirring Sticks .250"(+/-) X .250"(+/-) X 7.5"(+/-) The Sprue Plate In Picture #13 Rectangle Mold In Picture #12 Overall Outside Length : 2.330" (+/-) Overall Outside Width : 1.330" (+/-) Overall Thickness: .560" (+/-) Mold Cavity Length At Bottom: 1.255" (+/-) Mold Cavity Width At Bottom: .750" (+/-) Mold Cavity Depth: .175" (+/-) Long Narrow Mold In Picture #11 Overall Outside Length : 2.330" (+/-) Overall Outside Width : 1.330" (+/-) Overall Thickness: .560" (+/-) Mold Cavity Length At Bottom: 1.480" (+/-) Mold Cavity Width At Bottom: .512" (+/-) Mold Cavity Depth: .256" (+/-) Skullie Art Bar Mold Picture #10 Overall Outside Length : 2.330" (+/-) Overall Outside Width : 1.330" (+/-) Overall Thickness: .560" (+/-) Mold Cavity Length At Bottom: 1.500" (+/-) Mold Cavity Width At Bottom: .825" (+/-) Mold Cavity Depth: .180" (+/-) Clamp Picture #10 Note About Carbon Graphite: Always Preheat Your Crucibles, Dishes And Even Molds Before Adding Metal To The Empty Devices. When Possible, Heat The Charge Of Metal Before Adding It Into The Crucible. Try Not To Hold Your Torch In One Spot Too Long As The Pressure Of The Gas Will Start To Break Down The Graphite. Most Oxygen /Acetylene Torches Will Produce Temperatures Well Beyond 3000 Degrees Fahrenheit. Use A “Neutral Flame” To Do The Melting To Prolong The Useful Life Of The Graphite. Remember: Always Wear Eye Protection And Adequate Safety Attire When Working With Hot Or Molten Metals. Molten Metal Can Blow Back When Poured Into Molds. The Gasses Given Off When Melting Metals And Using Fluxes Can Be Very Harmful If Inhaled. Always Do Your Work In A Well Ventilated Area. I Assume No Liability For Misuse Of the Furnace, Torch, Crucibles Or Tongs. Use Them As You See Fit. Thank You. Payment We Accept PayPal Only At This Time. PayPal Payments Should Be Sent Within 7 Days Of Winning The Auction. If You Have A Problem Or Want To Wait For Another Auction Of Ours You Are Bidding On, Send Us An E-Mail And We Can Work It Out. Shipping We Process Your Purchase As Soon As Payment Has Cleared.We Ship Every Day Of The Week Except Sunday. I watch The Auctions And If We Have An Auction Ending Before 10:00 AM, I wait A Reasonable Time For Payment To Clear. Otherwise We Try To Ship Before 10:00 AM Daily. We Will Be Selling International In The Near Future And We Will Post New Shipping Information At That Time. Terms of Sale One Some Types Of Auctions We Do Not Accept Returns. We Do this On Items That Are Delicate In Nature Or Can Be Altered Or Swapped Out With Defective Items. BUT....... I Will Do What Ever Needs To Be Done To Resolve A Problem. Sometimes People Don't Read All Of The Product Description Or Misread It. These Problems Are Not Hard To Resolve. I Will Always Allow A Buyer To Retract A Winning Bid If They Bid In Error. We Try To Treat Folks Like We Like To Be Treated. "Fair And Honest". About Us We Started Out Selling Our Custom Artist Canvas On Ebay. Our Canvas Is Heavy And The Shipping Charges Made it Impracticable To Sell It. We Started Buying Silver And Gold That Was The Start Of Our Metal Melting And Casting Endeavor. We Have Meet Some Great People Through Ebay And had Allot Of Fun Buying And Selling. We Try To Treat Everyone Like We Like To Be Treated. We Are Quick To Answer Your Questions And If We Don't have An Answer, We Find Someone Who Does. We Don't Require You To Buy From Us To Help You With Your needs. We Play Fair And Even To The Point Being Too Wordy, We Try To Make Our Item descriptions As Accurate As Possible. We Are 5 Star Sellers And We Are Proud Of The Fact We Do Business The Correct Way, "Straight-Up And Honest. Contact Us Feel Free To Contact Us With Any And All Your Questions About An Auction Or Just A General Subject. Keep In mind, We Are Retired And Have The Time To Give Some Wordy Answers. Some Times One Might Say "Rambling On". You Can Contact Us Through Any Of Our Listings. It Is 2:07AM Right Now, So You Will Usually Get An Answer Back Quickly.

Condition	New other (see details) : A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“The Steel used is new. The refractory and regitizer are new. The torch heads are new and unused. The propane hoses are new and unused. The tank "T" is new and unused. The furnace is manufactured in my shop. There Are Small Differences From Unit To Unit But they All Will Work The Same.”