600w 12v Wind Solar Hybrid Charge Controller Regulator

AU $125.00

Hong kong, Hong Kong
Jan 30th

Open on mobile:
QR code

600W 12V Wind Solar Hybrid Charge Controller regulator when you buy it, pls inform us your wind turbine is AC output or DC output ? it is important to ship the correct product. Product details: 1?General 1.1 The controller user’s manual is suitable for 600W/12V off-grid wind turbine generator and PV hybrid street lamp system. 1.2 Futures 1.2.1 Automatic dump load while the wind turbine generator overload. 1.2.2 Batteries overcharge or overdischarge protection. 1.2.3 Protect batteries charge to solar panel. at night 1.2.4 Protect electric shock. 2 Technical specifications : Model SGC-W1206 Rated voltage(V) 12V Load Rated power(W) 100W Solar Panel 12V-150W Rated current of wind-generator(A) 35A Battery over discharge protection voltage 11V Battery over discharge recovery voltage 11.5V Final charge voltage(V) 14.4V Floating voltage(V) 13.9V Recover time of braking 30min Allowable ambient temperature (℃) -10~40 Dimension(mm) 208x140x74 Weight(g) 1500g 3. Installing steps 3.1 Panels: 3.1.1 Terminals in accordance with the upper part of the label, the right equipment connected to cable: W1?W2?W3:Input terminals of wind turbine generator (Regardless of sequence); S+:Means nothing S-:Means nothing B+:Batteries + B-:Batteries - DC+:Means nothing -1 :Means nothin-2 :Means nothing 3.2 Installing steps 3.2.1Controller based on its protection level, housed in indoor and outdoor drying, ventilation, the controller may not be around the inflammable and explosive materials 3.2.2 Controller should be mounted vertically, hanging solid. 3,2,3 Unloading an external device, due to unloading, the equipment surface temperature will exceed 85 ℃, must be firmly placed on the location where not to be touched easily, meanwhile to maintain a well-ventilated, non-flammable, explosive goods. 3.2.4 Before wiring, to put the first wind turbine brakes manually switch to the "?"position, when wiring to prevent electric shock accidents caused by running generators. 3.2.5 Check the wiring correct, to put the wind turbine brakes manually switch to the "O" position, equipment into operation Security Warning: the boot before the battery must first access controller may not be the case without the battery running generator, or generating units and the controller will cause damage! 3.3 Running state, indicator function setting 3.3.1 Running indicators Controller in operation mode, the indicator will show the different status of the operation of equipment, detailed in the table below: Internal dump load State Explanation L1?L2?L3(Green) Lights Full battery capacity L1?L2 (Green) Lights Normal battery capacity L1 (Green) Lights Low battery capacity L1 (Green) Blinks Battery exhausted (Green) Lights Wind turbine generator is working ≈ (Red) Lights Dump load (Green) Lights Means nothing (Green) Lights Means nothing 4.0 Notes 4.1 Ordering Information 4.1.1 Order should be detailed description of equipment configuration requirements, such as: generator sets parameters, the choice of external dump loading devices, protective grading, as well as overload protection. 4.1.2 Use under special conditions, can be customized in accordance with the usage conditions of users. 4.2 Installation Notes 4.2.1 Before accessing controller to confirm the system equipment, such as, wind turbine, batteries, lightning protection devices, cable selection configuration is correct, accurate installation. 4.2.2 Check-to-ground insulation resistance of equipment should be in line with the wind / light generating system of technical requirements. 4.2.3 Installation, disassembly, repair equipment, wind turbine will be sure to manually switch the brake to the "|" position. 5.0 After-sales service 5.1 Customers in the procurement, use, or for advice on the quality of this product can contact the designated distributors or with the company. Quality warranty : 1. CE Certificate 2.12 month warranty 3. the buyer is responsible for the return post mail cost 4.15 days refund and 20 days exchange after receiving the product Payment: 1. We prefer you can pay via paypal, thank you ! 2. pls pay within 5 days after winning the auction or buying. Shippment: 1. We ship to worldwide , We only ship to the paypal adress, pls confirm it when you are buying. 2. Taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s r esponsiblity please check with your country’s customs office to determine what these additional costs will be prior to bidding ying. Contact us: you can contact us, we will reply you within 24 hours Engineered for professional eBay sellers!