60W Co2 RF Surgical Laser System with additional Vaginal Canal Handpiece, US $17,500.00 – Picture 0

60W Co2 RF Surgical Laser System with additional Vaginal Canal Handpiece, US $17,500.00 – Picture 1

60W Co2 RF Surgical Laser System with additional Vaginal Canal Handpiece, US $17,500.00 – Picture 2

60W Co2 RF Surgical Laser System with additional Vaginal Canal Handpiece, US $17,500.00 – Picture 3

60W Co2 RF Surgical Laser System with additional Vaginal Canal Handpiece, US $17,500.00 – Picture 4

60W Co2 RF Surgical Laser System with additional Vaginal Canal Handpiece, US $17,500.00 – Picture 5

60W Co2 RF Surgical Laser System with additional Vaginal Canal Handpiece, US $17,500.00 – Picture 6

60W Co2 RF Surgical Laser System with additional Vaginal Canal Handpiece, US $17,500.00 – Picture 7

60w Co2 Rf Surgical Laser System With Additional Vaginal Canal Handpiece

US $17,500.00

???, ???, China
Jan 30th

Open on mobile:
QR code

Direction for Use A. How to install 1) Connect INTERLOCK’s connecter to socket and confirm surrounding safety conditions. 2) Connect FOOT SWITCH (scaffold switch) cable to relevant socket 3) Confirm working voltage and connect power supply cord. 4) Check whether the laser shooting part is dirty or has foreign substance. B. Safety check points before operation 1) Renew a medical record of patient before treatment 2) Consider patient’s condition and clinical treatment guideline and then input proper parameter 3) Prepare patient’s skin for laser treatment. Do not leave any shaving marks or little hair, lotion, perfume, SPF and topical anesthetic. 4) The device has to be”Stand-by” mode when it is not operating. C. Direction for use and Operating procedure 1) Turn on the power of device 2) Appear to be the stand-by screen as below when key switch is ON. 3) Select a mode (Fractional/Normal) and range of adjustment when the stand-by screen comes up. 4) Operate it by stepping FOOT SWITCH after completing every procedure 5) Detail instructions of each mode are as follows 3. Specification A. Electrical Specification 1) Protection classes and forms of electric shock: Class I equipment, Type B applied part 2) Laser type and danger class by IEC60825-1(2001): CO2 LASER, 4 classes. 3) Rating voltage and power consumption: 220VAC±10%, 50/60Hz, 700 VA 4) Laser Part - Shooting Beam [1] Medium: CO2 LASER [2] Laser Tube Type: All metal sealed off RF CO2 Laser tube [3] Laser Power: MAX 60W [4] Wavelength: 10.6um [5] Spot Size: MAX 20mm * 20mm [6] Pulse Repetition Rate: 1Hz ~ 20Hz [7] Device cooling: Air cooling - Articulated Arm [1] Medium: Crystal Diode Laser [2] Laser Type: CW Laser Diode [3] Laser Power: MAX 5mW [4] Wavelength: 650nm 5) Display: 10.4" Color TFT LCD Panel with CCFL Back Light (800*600) 6) Protection [1] Laser Output: It does not shoot the laser beam when step the FOOT Switch not being in READY. [2] Emergency Switch: The laser shooting stops immediately when push the emergency switch. [3] Remote Interlock: The laser shooting stops when the signal of remote Interlock is inputted. [4] Laser Over Current: The laser stops outputting when rated power of laser diode flows over 20% [5] DSP Watchdog: When DSP or Firmware works abnormally every output becomes OFF. Watchdog Circuit: Circuit to watch whether predetermined condition is satisfied within fixed time [6] Work safety circuit when voltage and electric current impose more than rated to circuit system. B. Mechanical Specification 1) Dimension: 835mm x 410mm x 300mm [WxDxH] 2) Hand-piece Length: 120mm 3) Weight: About 65 Kg

Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...

Country/Region of Manufacture

China