6ft 72" Silk Screen Printing Squeegee Blade 60 Duro Polyurethane Rubber Red

US $28.34

Los Angeles, California, United States
Jul 26th

Open on mobile:
QR code

6FT - 72" Silk Screen Printing Squeegee Blade - 60 DURO - Polyurethane Rubber Free Shipping for USA Customers Door to Door Service Stock in Los Angeles, CA Buy it now with confidence Squeegee durometer is the squeegee "hardness" that determines the amount of pressure required to push ink through mesh. In general, soft Squeegees leave a thicker ink deposit, while hard squeegees deposit a thinner amount. What durometer should you use? 60 durometer is the softest and leaves a minimal ink deposit, its great for very thin ink and water based inks. 70 durometer is by far the most popular an versitile in the garment industry; it's a great general purpose blade for just about everything. 80 durometer provides a stronger force and larger deposit for thick opaque inks. 70/90/70 triple durometer gives you a soft edge with a hard center for optimal control. Maintenance: Achieving the best screen printing performance and productivity is greatly dependent on the selection of the correct squeegee for the application and proper squeegee maintenance. When printing, monitor production time and rotate squeegees frequently. (The necessary rotation frequency is dependent on the ink / solvent system involved in the application) By doing so, you will achieve a more uniform print quality and increase the life of your squeegees. A squeegee should always be wiped clean and dry following removal from the press and stored in a dry environment at room temperature. The blade should be allowed to recover from the ink and solvent attack and rest for a period of 24 hours. It can then be placed back into production, or if necessary re-sharpened and placed back into production. Storage: Polyurethane Squeegees should always be stored flat in a dry (50% Relative Humidity) environment at room temperature. (approximately 60-70 degrees F) Storage at temperatures below 60 degrees F may show an increase in durometer. This increase has no influence on the physical properties or the performance of the polyurethane. Under these storage conditions. Older squeegees often show increased printing performance. Package: Packing Size : 24.5 x 24 x 5.5 cm Gross Weight: 1.07 kg

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Size	6FT - 72"
Type	Screen Printing Squeegee
Model	SPM-HY-SSB60-6FT-US
MPN	6593002672400
Material	Polyurethane Rubber
Brand	QOMOLANGMA
UPC	8414830931281