+ Post new Ad
6MM X 51MM 2-FLUTE HRC55 COMPRESSION UP/DOWN CUT CARBIDE FLAT ENDMILL, US $240 – Picture 0
6MM X 51MM 2-FLUTE HRC55 COMPRESSION UP/DOWN CUT CARBIDE FLAT ENDMILL, US $240 – Picture 0

6mm X 51mm 2-flute Hrc55 Compression Up/down Cut Carbide Flat Endmill

US $240

  • --, Hong Kong
  • Jun 4th
Open on mobile:
QR code
6MM X 51MM 2-FLUTE HRC55 COMPRESSION UP/DOWN CUT CARBIDE FLAT ENDMILL MATERIAL : MICRO-GRAIN SOLID CARBIDE. COATING : NONE VERY GOOD FOR WOOD, PVC, ACRYLIC, PLASTIC, HIGH OR MEDIUM DENSITY FIBREBOARD & ETC. VERY CLEAN MACHINED SURFACE.   2-FLUTE UP AND DOWN CUT, COMPRESSION. END TYPE : FLAT / SQUARE CUTTER DIAMETER : 6MM TOTAL LENGTH : 51MM FLUTE LENGTH : 25MM SHANK DIAMETER : 6MM PROVIDE TAILOR MADE ENDMILL. MAKE ACCORDING TO CUSTOMER REQUEST. NO ADVANCE PAYMENT REQUIRE. PAY JUST BEFORE SHIPMENT. PLEASE WRITE TO ME FOR ANY INQUIRY WE SHIP WORLDWIDE. BY E-PACKET OR AIR MAIL. THANK YOU FOR ATTENTION

Directions

Similar products from End Mills Router & Drill Bits

Lot 5pcs HRC60 Solid Carbide R1 Ball Nose Endmills Cutting Dia 2mm End Mill Bits

Lot 5pcs HRC60 Solid Carbide R1 Ball Nose Endmills Cutting Dia 2mm End Mill Bits

  • CN, China
  • Jun 4th
3.5mm Accupro Solid Carbide TiCN Coated 2 Flute End Mill (P 579)

3.5mm Accupro Solid Carbide TiCN Coated 2 Flute End Mill (P 579)

  • Dallas, Texas, United States
  • Jun 4th
Spiral Right/Spiral Left

Spiral Right/Spiral Left

  • USA, United States
  • Jun 4th
3/4" Dura Mill Carbide TialN 4FL Fine Rougher Chamfer End Mill (P 581)

3/4" Dura Mill Carbide TialN 4FL Fine Rougher Chamfer End Mill (P 581)

  • Dallas, Texas, United States
  • Jun 4th
Micro 100 SFL-250-410 Single Flute Router, Left Hand Spiral, 1/4" Cutter

Micro 100 SFL-250-410 Single Flute Router, Left Hand Spiral, 1/4" Cutter

  • USA, United States
  • Jun 4th
Micro 100 SFLM-010-10 Single Flute Router, Left Hand Spiral, Metric Dimensions,

Micro 100 SFLM-010-10 Single Flute Router, Left Hand Spiral, Metric Dimensions,

  • USA, United States
  • Jun 4th
.9850 END MILL HSS 4 FLUTE 10 INCH OVERALL 1 INCH SHANK (G-1-6-2-18-OFG)

.9850 END MILL HSS 4 FLUTE 10 INCH OVERALL 1 INCH SHANK (G-1-6-2-18-OFG)

  • Mitchell, Indiana, United States
  • Jun 4th
Micro 100 SFPM-020-20 Single Flute Router, Right Hand Spiral, Metric Dimensions,

Micro 100 SFPM-020-20 Single Flute Router, Right Hand Spiral, Metric Dimensions,

  • USA, United States
  • Jun 4th
Pedigree tool 15/32 shaft 3 fluted ball round TICN

Pedigree tool 15/32 shaft 3 fluted ball round TICN

  • Hialeah, Florida, United States
  • Jun 4th
Micro 100 SFPM-020-40 Single Flute Router, Right Hand Spiral, Metric Dimensions,

Micro 100 SFPM-020-40 Single Flute Router, Right Hand Spiral, Metric Dimensions,

  • USA, United States
  • Jun 4th
Lot 5pcs HRC60 Solid Carbide R1.5 Ball Nose Endmills Cutting Dia 3mm EndMill

Lot 5pcs HRC60 Solid Carbide R1.5 Ball Nose Endmills Cutting Dia 3mm EndMill

  • CN, China
  • Jun 4th
Lot 5pcs HRC60 Solid Carbide R2 Ball Nose Endmills Cutting Dia 4mm End Mill Bits

Lot 5pcs HRC60 Solid Carbide R2 Ball Nose Endmills Cutting Dia 4mm End Mill Bits

  • CN, China
  • Jun 4th
NOS BRASS HAMMER GRACE USA 24oz Machinists Mechanics

NOS BRASS HAMMER GRACE USA 24oz Machinists Mechanics

  • Merrickville, Ontario, Canada
  • Jun 3rd
Machinist Lot of 5) 3/8" HTC Carbide TiALN 4 Flute End Mill *NR* B 943

Machinist Lot of 5) 3/8" HTC Carbide TiALN 4 Flute End Mill *NR* B 943

  • Dallas, Texas, United States
  • Jun 3rd
Machinist Lot of 5) 3/8" HTC Carbide TiALN 4 Flute Long End Mill *NR* B 944

Machinist Lot of 5) 3/8" HTC Carbide TiALN 4 Flute Long End Mill *NR* B 944

  • Dallas, Texas, United States
  • Jun 3rd
CARBIDE END MILL 9/32"DIAx3/8" SHANK WITH .040"RADIUS 3FLUTE NEW RTW USA $10.00

CARBIDE END MILL 9/32"DIAx3/8" SHANK WITH .040"RADIUS 3FLUTE NEW RTW USA $10.00

  • North Tonawanda, New York, United States
  • Jun 3rd
7/32 Solid Carbide End Mill 4 Flute Centercutting TiN Coated LOC 5/8 1/4 Shank

7/32 Solid Carbide End Mill 4 Flute Centercutting TiN Coated LOC 5/8 1/4 Shank

  • Pottstown, Pennsylvania, United States
  • Jun 3rd
63/64" Straight Shank 2 Flutes 6-3/8" OAL

63/64" Straight Shank 2 Flutes 6-3/8" OAL

  • Athens, Georgia, United States
  • Jun 3rd
(Lot of 5) 3/8" Kennametal Solid Carbide TiN 4 Flute End Mill (B 945)

(Lot of 5) 3/8" Kennametal Solid Carbide TiN 4 Flute End Mill (B 945)

  • Dallas, Texas, United States
  • Jun 3rd
3/8" Roughing End Mill M42 Cobalt Fine Pitch TiN Coated 4 Flute LOC 1/2" NEW

3/8" Roughing End Mill M42 Cobalt Fine Pitch TiN Coated 4 Flute LOC 1/2" NEW

  • Pottstown, Pennsylvania, United States
  • Jun 3rd

People who viewed this item also vieved

Hassay Savage Keyway Broach, 1", Style VI, Used

Hassay Savage Keyway Broach, 1", Style VI, Used

  • Tazewell, Virginia, United States
  • Jan 30th
Threadwell Keyway Broach, 3/16-2, Used

Threadwell Keyway Broach, 3/16-2, Used

  • Tazewell, Virginia, United States
  • Jan 30th
Saw 2 - 3/16" X1 3/4" WITH 1/2" HOLE

Saw 2 - 3/16" X1 3/4" WITH 1/2" HOLE

  • Fife Lake, Michigan, United States
  • Jan 30th
Saw - 3- H.S.S. - 1Pc. -1/16" And 2Pc. - 5/64 X 1 3/4" X 1/4" HOLE

Saw - 3- H.S.S. - 1Pc. -1/16" And 2Pc. - 5/64 X 1 3/4" X 1/4" HOLE

  • Fife Lake, Michigan, United States
  • Jan 30th
GREENLEAF CERAMIC INSERTS 419813

GREENLEAF CERAMIC INSERTS 419813

  • Calexico, California, United States
  • Jan 30th
GREENLEAF CERAMIC INSERTS RCGN-2V T1

GREENLEAF CERAMIC INSERTS RCGN-2V T1

  • Calexico, California, United States
  • Jan 30th
Eagle Tool EX25054 Flexible Cable Bit Extension 1/4" Diameter x 54" Length (Pac

Eagle Tool EX25054 Flexible Cable Bit Extension 1/4" Diameter x 54" Length (Pac

  • United States
  • Jan 30th
Amico Metal 8 Angle Degree Screw Thread Cutting Gauge 2 Pcs

Amico Metal 8 Angle Degree Screw Thread Cutting Gauge 2 Pcs

  • United States
  • Jan 30th
Round Die FBR7SA1817 Lane

Round Die FBR7SA1817 Lane

  • Hendersonville, Tennessee, United States
  • Jan 30th
3/4" x 3/8" x 12" Die Spring

3/4" x 3/8" x 12" Die Spring

  • Hendersonville, Tennessee, United States
  • Jan 30th
.3160" O HIGH SPEED STEEL CHUCKING REAMER

.3160" O HIGH SPEED STEEL CHUCKING REAMER

  • Petaluma, California, United States
  • Jan 30th
5/16" Spe-D-Cut SSR Reamer NOS

5/16" Spe-D-Cut SSR Reamer NOS

  • Wisconsin Rapids, Wisconsin, United States
  • Jan 30th
NEW DIAMOND SAW WORKS 11FT 6IN LENGTH 3/4IN WIDTH BAND SAW BLADE D402305

NEW DIAMOND SAW WORKS 11FT 6IN LENGTH 3/4IN WIDTH BAND SAW BLADE D402305

  • Delta, Ohio, United States
  • Jan 30th
250-1.6-32B Cold Saw Blade - metal cutting

250-1.6-32B Cold Saw Blade - metal cutting

  • Grand Blanc, Michigan, United States
  • Jan 30th
10x Ball Nose Carbide End Mill Double Flute Spiral CNC Router Bits 1/8"x 1.0x5mm

10x Ball Nose Carbide End Mill Double Flute Spiral CNC Router Bits 1/8"x 1.0x5mm

  • Shandong, China
  • Jan 30th
10pcs Ballnose Carbide Endmill Double Flute CNC Router Bits 1/8" 3.175mmx22mm

10pcs Ballnose Carbide Endmill Double Flute CNC Router Bits 1/8" 3.175mmx22mm

  • Shandong, China
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies