$6X LED High Bay 100w 8000lm (Metal-Halide = 400 watt) with Aluminium Refractor, US $560 – Picture 0$

6x Led High Bay 100w 8000lm (metal-halide = 400 Watt) With Aluminium Refractor

US $560

Fort Lauderdale, Florida, United States
Jun 22nd

Open on mobile:
QR code

Get our 6 pack of our Plug & Play High Bay LED Lights for a small warehouse or retail store. This is our Plug & Play package for your LED High Bay Solution. There is no need for an electrician to bypass a ballast since we include the entire setup. We include a 100 Watt 8000 Lumen 6500K Cool White High Bay Light Bulb. We also include an Aluminum Refractor to protect the lamp, amplify the brightness and direct it downward. The attached cord can be tied into your current lighting power source or it can be plugged into a regular wall socket for ease of movement. The StarLED High Bay Bulb is a 100 watts LED equivalent to the old style 400 watt metal-halide light bulbs at 8000 lumens. Our LED light has a 50,000 hour life and does not create heat. It is cool to the touch after many hours of use, unlike a metal-halide after just 1 minute of use. Fits a large mogul screw base E39 and does not require a starter bypass when used as our kit. This bulb cannot be installed into a standard metal-halide lamp with the ballast intact. To use in a traditional large mogel lamp, you must bypass the ballast. We do have instructions on how to do this on our website or you can hire an electrician. The StarLED High Bay LED bulb is brighter, more durable, mercury free and last 5X longer than a traditional metal-halide light. We stand behind our products by offering a 5 year warranty. Specifications: Material: Aluminum Radiator, PC Shell Base Type: E39 Power: 100 Watt Luminous Flux: 8,000 Lumens Color Temp: 6500k, Cool White Input Voltage: AC 85V - 285V, 60Hz Color Rendering index: 75 Switch Cycles: 10,000x LED Lifetime : 50,000 Hours Dimensions: 8.65" Diameter x 13" Length Build-in Cooling Fan Aluminum Refractor Note: This light does not require a bypass of the ballast if used in our kit. It does however require a bypass of the ballast to work properly in a traditional fixture. We suggest a licensed electrician to perform the job. We estimate less than 30 minutes per light fixture. The standard metal-halide bulb produces light with an electrical charge inside of a mixture of mercury and metal halide gases inside of a sealed glass tube. The modern compound uses sodium iodine and will produce approximately 75 to 100 lumens per watt. A typical metal-halide bulb will last approximately 6,000 to 15,000 hours depending on the environment and cooling to the lamp. Most uses of the larger 400 watt bulbs are in warehouses, department stores, public spaces and industrial. The dangers of the metal-halide lamp are when damage occurs during use or upon disposal. Mercury is dangerous in gas or liquid form and causes damage to the nervous system. The replacement is our 100 watt LED High Bay Bulb which puts out 8000 lumens. This bulb is equivalent to the 400 watt metal-halide but with far less heat and no danger of mercury gasses if damaged. Our bulb is a 6500K bulb which gives the most accurate range of natural light and has a life of 50,000 hours. This is 5X longer than a metal-halide bulb. We have seen a huge demand here in Florida with non air-conditioned warehouses. Metal-halide lamps can put out approximately 600 degrees of heat on the glass where the LED High Bay bulb can be unscrewed by hand with over 24 hours of continued use. You can touch the lens which is only moderately warm, less than 80 degrees. Benefits include: 5 Year Warranty 100% Mercury Free RoHS Compliant / CE Instant On to Full Brightness No Buzzing Uses 90% less energy Shatter Resistant Low Heat No Ultraviolet Light Lightweight Aluminum Shield