7-16 Din Female Positive Stop™ For 1-5/8 In Cable New In Box

US $110

  • Loveland, Ohio, United States
  • May 29th
Specifications General Specifications   Interface   7-16 DIN Female Body Style   Straight Brand   HELIAX®   |   Positive Stop™ Mounting Angle   Straight Ordering Note   CommScope® standard product in Europe, the Middle East, and Africa   |   CommScope® standard product in the United States and Canada     Electrical Specifications   Connector Impedance   50 ohm Operating Frequency Band   0 – 2700 MHz Cable Impedance   50 ohm 3rd Order IMD, typical   -120 dBm @ 910 MHz 3rd Order IMD Test Method   Two +43 dBm carriers RF Operating Voltage, maximum (vrms)   1415.00 V dc Test Voltage   4000 V Outer Contact Resistance, maximum   1.50 mOhm Inner Contact Resistance, maximum   0.80 mOhm Insulation Resistance, minimum   5000 MOhm Average Power   3.0 kW @ 900 MHz Peak Power, maximum   40.00 kW Insertion Loss, typical  0.05 dB Shielding Effectiveness   -130 dB     Outline Drawing       Mechanical Specifications   Outer Contact Attachment Method   Ring-flare Inner Contact Attachment Method   Captivated Outer Contact Plating   Trimetal Inner Contact Plating   Silver Attachment Durability   25 cycles Interface Durability   50 cycles Interface Durability Method   IEC 61169-4:9.5 Connector Retention Tensile Force   2224 N   |   500 lbf Connector Retention Torque   13.56 N-m   |   120.00 in lb Insertion Force   200.17 N   |   45.00 lbf Insertion Force Method   IEC 61169-1:15.2.4 Pressurizable   No     Dimensions   Nominal Size   1-5/8 in Diameter   62.74 mm   |   2.47 in Length   97.82 mm   |   3.85 in Weight   722.00 g   |   1.59 lb     Environmental Specifications   Operating Temperature   -55 °C to +85 °C (-67 °F to +185 °F) Storage Temperature   -55 °C to +85 °C (-67 °F to +185 °F) Immersion Depth  1 m Immersion Test Mating   Unmated Immersion Test Method   IEC 60529:2001, IP68 Water Jetting Test Mating   Unmated Water Jetting Test Method   IEC 60529:2001, IP66 Moisture Resistance Test Method   MIL-STD-202F, Method 106F Mechanical Shock Test Method   MIL-STD-202F, Method 213B, Test Condition C Thermal Shock Test Method   MIL-STD-202F, Method 107G, Test Condition A-1, Low Temperature -55 °C Vibration Test Method   IEC 60068-2-6 Corrosion Test Method   MIL-STD-1344A, Method 1001.1, Test Condition A     Standard Conditions   Attenuation, Ambient Temperature   20 °C   |   68 °F Average Power, Ambient Temperature   40 °C   |   104 °F

Directions

Similar products from Electrical Connectors

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies