+ Post new Ad
7" Premium Concrete Edge Floor Hand Grinder Frame Cart Dolly, US $300.00 – Picture 0
7" Premium Concrete Edge Floor Hand Grinder Frame Cart Dolly, US $300.00 – Picture 0

7" Premium Concrete Edge Floor Hand Grinder Frame Cart Dolly

US $300.00

  • Tampa, Florida, United States
  • Aug 8th
Open on mobile:
QR code
7" Premium Concrete Grinder Frame. Used Once on Personal Home. Grinder Not Included . 7 inch grinder Stand Standard Color: Yellow This edge grinder stand is for the contractor that is looking to use currently grinder without need to spend extra money on a new one. Features: ♦Easy grind right up the edge and the corner and big polishing machines can't reach area. ♦Can do dry grinding and polishing work ♦High brightness LED light with more than 50000 hours life and energy saving. ♦Operation with 7" angle grinders speed adjustable 600-8500rpm. ♦Safer operating without operators fatigue. ♦Available to connect a vacuum cleaner. ♦Convenient operation in the dark area with a headlight. ♦Control and apply pressure to the center of the tool with Guide handle. Dimension: Height: 36" Width: 30" Dust Port: 2" Voltage: 110V Comes with a Shroud. ( Does not incluide grinder ) Thank you
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand sase
Country/Region of Manufacture Unknown
Model Tiny Spyder Genie
Application Concrete
MPN Does Not Apply
UPC Does not apply

Directions

Similar products from Grinders - Professional

Hilti DG 150 Concrete Grinder with DPC 20 Power Converter

Hilti DG 150 Concrete Grinder with DPC 20 Power Converter

  • Columbus, Ohio, United States
  • Aug 10th
Milwaukee 5194 4.5 Amp 2" Die Grinder 23,000 RPM Used Very Good Condition FS

Milwaukee 5194 4.5 Amp 2" Die Grinder 23,000 RPM Used Very Good Condition FS

  • Southaven, Mississippi, United States
  • Aug 9th
Baldor Spark Arrester G6AP1003A01SP Fits Baldor 6" and 7" Vintage Bench Grinders

Baldor Spark Arrester G6AP1003A01SP Fits Baldor 6" and 7" Vintage Bench Grinders

  • Troy, Michigan, United States
  • Aug 9th
Milwaukee 6066-6 Heavy Duty Angle Grinder Sander 7"/9", 6000RPM, 3.5HP

Milwaukee 6066-6 Heavy Duty Angle Grinder Sander 7"/9", 6000RPM, 3.5HP

  • Ogden, Utah, United States
  • Aug 9th
Hard Surface Prep Concrete Scarfier Hexpin turbo & Carpet Brush 19” 110v 1ph

Hard Surface Prep Concrete Scarfier Hexpin turbo & Carpet Brush 19” 110v 1ph

  • Westminster, Colorado, United States
  • Aug 9th
HILTI AG 500-A22 With Battery . (43576)

HILTI AG 500-A22 With Battery . (43576)

  • Cocoa, Florida, United States
  • Aug 9th
Lot of 10 Trapezoid Grinding Shoe Disc Plate 30/40 Grit

Lot of 10 Trapezoid Grinding Shoe Disc Plate 30/40 Grit

  • San Jose, California, United States
  • Aug 8th
FOR PARTS - Milwaukee 5192 4.5 Amp 120V 21000 RPM Die Grinder Heavy Duty

FOR PARTS - Milwaukee 5192 4.5 Amp 120V 21000 RPM Die Grinder Heavy Duty

  • Lawrenceville, Georgia, United States
  • Aug 8th
THINSET REMOVAL BIT, 7-in Arrow Diamond Grinding Cup!!!

THINSET REMOVAL BIT, 7-in Arrow Diamond Grinding Cup!!!

  • Boaz, Alabama, United States
  • Aug 8th
New 10 x Flap Discs 80 Grit Size 100 x 16 mm Steel Grinding #T165 @2x2

New 10 x Flap Discs 80 Grit Size 100 x 16 mm Steel Grinding #T165 @2x2

  • delhi, India
  • Aug 8th
Baby Mammoth Concrete Floor Grinder Polishing Machine 220v Single Phase

Baby Mammoth Concrete Floor Grinder Polishing Machine 220v Single Phase

  • Fort Lauderdale, Florida, United States
  • Aug 8th
Die Grinder YOCA #YC10B 115v 0-3000 r/min Chuck 3-4mm 115w

Die Grinder YOCA #YC10B 115v 0-3000 r/min Chuck 3-4mm 115w

  • Street, Maryland, United States
  • Aug 8th
SG-9 Scarifier w/5 Point Carbide Drum

SG-9 Scarifier w/5 Point Carbide Drum

  • Chicago, Illinois, United States
  • Aug 8th
Winbag 15730 Air Wedge Alignment Tool, Inflatable Shim

Winbag 15730 Air Wedge Alignment Tool, Inflatable Shim

  • USA, United States
  • Aug 8th
Bosch Dust Extraction Guard For Cutting Concrete 18DC-5E NEW

Bosch Dust Extraction Guard For Cutting Concrete 18DC-5E NEW

  • Harker Heights, Texas, United States
  • Aug 7th
Milwaukee 6142-31 4-1/2 In Wheel Diameter 120VAC Heavy Duty Angle Grinder (D)

Milwaukee 6142-31 4-1/2 In Wheel Diameter 120VAC Heavy Duty Angle Grinder (D)

  • Oregon, Illinois, United States
  • Aug 7th
Milwaukee 6141-31 4-1/2 In Wheel Dia 120VAC 11,000 RPM Corded Angle Grinder (F)

Milwaukee 6141-31 4-1/2 In Wheel Dia 120VAC 11,000 RPM Corded Angle Grinder (F)

  • Oregon, Illinois, United States
  • Aug 7th
Lot (8) General Power Floor Scraper Tile Stripper Blade 4x6 Linoleum FCS16-1100

Lot (8) General Power Floor Scraper Tile Stripper Blade 4x6 Linoleum FCS16-1100

  • Round Rock, Texas, United States
  • Aug 7th
Pullman Ermator S26, Pre-separator, USED

Pullman Ermator S26, Pre-separator, USED

  • Wenatchee, Washington, United States
  • Aug 7th
Buehler POLIMET Polisher/Grinder # 47-1860-160 MOTOR

Buehler POLIMET Polisher/Grinder # 47-1860-160 MOTOR

  • Katy, Texas, United States
  • Aug 7th

People who viewed this item also vieved

DeWalt Electric Single Portable Hotdog Air Compressor D55141 Suitcase

DeWalt Electric Single Portable Hotdog Air Compressor D55141 Suitcase

  • Ellijay, Georgia, United States
  • Jan 30th
Makita HM1307CB 35-Pound Demolition Jack Hammer With Bit & Case Excellent!!!

Makita HM1307CB 35-Pound Demolition Jack Hammer With Bit & Case Excellent!!!

  • Miami, Florida, United States
  • Jan 30th
Pneumatic Air Sand Foundry Bench Rammer MP-00G NEW IN BOX MADE IN USA

Pneumatic Air Sand Foundry Bench Rammer MP-00G NEW IN BOX MADE IN USA

  • Kenton, Ohio, United States
  • Jan 30th
Humboldt H-2809 Stamped Cube Mold (Used)

Humboldt H-2809 Stamped Cube Mold (Used)

  • Salt Lake City, Utah, United States
  • Jan 30th
Duracell DS20R1i 2,000 Watt 4 HP 135cc Gas Powered Portable Inverter Generator

Duracell DS20R1i 2,000 Watt 4 HP 135cc Gas Powered Portable Inverter Generator

  • Laredo, Texas, United States
  • Jan 30th
5000w Generator Head for Welders Small Engines Full output 5kw A/C D/C AED6500wf

5000w Generator Head for Welders Small Engines Full output 5kw A/C D/C AED6500wf

  • Farmington, Missouri, United States
  • Jan 30th
Weller 6966C 250 Watt 120 VAC 60 Hz 2.2A 800°F ESD Ultra Light Heat Gun Tested C

Weller 6966C 250 Watt 120 VAC 60 Hz 2.2A 800°F ESD Ultra Light Heat Gun Tested C

  • Austin, Texas, United States
  • Jan 31st
PowerQuick Powered Personnel Ascender PQ 500-1 for Ropes Access

PowerQuick Powered Personnel Ascender PQ 500-1 for Ropes Access

  • Cookeville, Tennessee, United States
  • Jan 31st
Electric Cement Mixer - 8.5 cu. ft. - 2" ball for hitch

Electric Cement Mixer - 8.5 cu. ft. - 2" ball for hitch

  • Rincon, Georgia, United States
  • Jan 31st
GARDNER BENDER 2000 MINI-BRUTUS CABLE PULLER

GARDNER BENDER 2000 MINI-BRUTUS CABLE PULLER

  • Hillsboro, Illinois, United States
  • Jan 31st
TWO HUNDRED !! Powers 2-1/4" Drive Pins # 50044

TWO HUNDRED !! Powers 2-1/4" Drive Pins # 50044

  • Clinton Township, Michigan, United States
  • Jan 31st
Scaffold ratchet, (maybe). Item: 5674

Scaffold ratchet, (maybe). Item: 5674

  • Riverton, Illinois, United States
  • Jan 31st
INGERSOLL RAND 20V BATTERY

INGERSOLL RAND 20V BATTERY

  • Little River, South Carolina, United States
  • Jan 31st
Dewalt DCD985 20V 1/2 Hammer Drill, DCS380 Reciprocating Saw, 2 DCB200 Batteries

Dewalt DCD985 20V 1/2 Hammer Drill, DCS380 Reciprocating Saw, 2 DCB200 Batteries

  • Myerstown, Pennsylvania, United States
  • Jan 31st
Vintage Old Kennedy Machinist Tool Chest / Box, 7 Drawer, Good Condition

Vintage Old Kennedy Machinist Tool Chest / Box, 7 Drawer, Good Condition

  • Saint Clair, Michigan, United States
  • Jan 31st
260 AMP ASCO Emerson 7000 SERIES AUTOMATIC TRANSFER SWITCH

260 AMP ASCO Emerson 7000 SERIES AUTOMATIC TRANSFER SWITCH

  • Eustis, Florida, United States
  • Jan 31st
HIT Tools 22-RC19 3/4" REBAR CUTTER & 5/8" BENDER

HIT Tools 22-RC19 3/4" REBAR CUTTER & 5/8" BENDER

  • Spokane, Washington, United States
  • Jan 31st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies