Welcome to Our Store! Go to ... DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US 72 Character PVC Manual VIP Credit Card Embossing Machine Embosser DT How to use this machine: 1.Put the card in the card frame and fix it. 2.Move the frame and choose the position what you need. 3.Write the daisy characters plate ,use the pointer to choose the characters you need. 4.After doing step 1~3,jolt the hand-haft. 5.If the embossment depth is out fit what you need,you can adjust the bolt in adjusting hole at the bottom of machine.You can use 4th inner hexagon spanner to untie the bolt,and then use 8th outer hexagon spanner to untie outer bolt,after adjusting,please screw the bolt. Attention: 1.Please use the PVC card(85mm x 55mm) CR-80 standard. 2.When turning the characters plate,please don't drop down the hand-haft. 3.When switch the embossment size, please ward off the card frame slightly to avoid damage. 4.Never put hand or other hard objects into the machine. 5.Please move the card frame to the left end when not using the machine. 6.If the imprinted character may be deeper or shallower,undesirable,then it can be adjusted by adjusting screw in the regulation. Means:use the Z outside-hexagonal spanner along with the code sprinter to a little loose the hold-down nut,and then inside-hexagonal spanner with the code sprinter to adjust the middle regulating screw. Attention:turning the regulating screw in clockwise may deepen the typed characters while clockwise turning may lighten the typed characters.After finishing,please use the inside-hexagonal spanner with the code sprinter to make the regulating srcew stable,and then use the Z outside-hexagonal spanner to fasten the hold-downscrew. Kindly Notice: Due to the effort saving design, please do not pull the lever too hard during your operation in order to protect the machine. Package Content 1 x PVC Card Embossing Machine 1 x Punch Handle 1 x Handle Fastening Screw 1 x Sample PVC Card 1 x Set of Hardware 1 x User's Manual Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed Item Specifics Brand Unbranded MPN Does not apply EAN Does not apply UPC Does not apply Payment 1. We only accept payment via PayPal, other payment is not acceptable. 2. Please make sure your shipping address is the same of your ebay address before you pay. We will not be responsible for such a case if you change you shipping address as we have shipped your items out. Shipping 1. We ship to the World. 2. We only ship to confirmed ebay address; your ebay address must match your Shipping address. 3. Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy. Shipping fee has including the local handing and packaging fee. 4. All the items will be shipping within 1-2 working days after receiving the payment, except some holidays. 5. We will not be responsible for any custom delay or tax, because transit time is highly depended and provided by postal Service. Returns 1.If you have not satisfied as you received the item, please return it within 30 days for a replacement or money back. Please contact me before you return it. 2.All returned items must be in the original packaging with all components and accessories included, and you must provide us the return shipping information (The shipment or the tracking number) 3.Return shipping fee is to be paid by the buyers. We will not be responsible for any custom duty or import tax Customer Services 1.One Year Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). 2.Defective items must be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID. We do not repair or replace items with an expired warranty. Welcome to Our Store! Happy Shopping DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US Search Shop Category Store Home ◆ Beauty ◆ Clothing & Accessories ◆ Baby ◆ DIY & Tools ◆ Jewellery ◆ Tools & Building Supplies ◆ Toys & Games ◆ Arts, Crafts & Sewing ◆ Watches ◆ Books, Music, Video, DVD ◆ Appliances ◆ Electronic cigarette ◆ Musical Instruments ◆ Industrial & Scientific ◆ Garden & Outdoors ◆ Health & Personal Care ◆ Home & Kitchen ◆ Lighting ◆ Luggage & Bags ◆ Office Products ◆ Outdoors ◆ Pet Supplies ◆ Security & Surveillance ◆ 3D Printable Designs ◆ Other ◆ HK UK Selling ◆ Cell Phones & Accessories ◆ Computer Accessories ◆ Charger ◆ Electronic Accessories ◆ US Hot Selling ◆ US Fixed Selling ◆ Software ◆ Consumer Electronics ◆ Camera & Photos ◆ Automotive Parts & Accessories 72 Character PVC Manual VIP Credit Card Embossing Machine Embosser DT How to use this machine: 1.Put the card in the card frame and fix it. 2.Move the frame and choose the position what you need. 3.Write the daisy characters plate ,use the pointer to choose the characters you need. 4.After doing step 1~3,jolt the hand-haft. 5.If the embossment depth is out fit what you need,you can adjust the bolt in adjusting hole at the bottom of machine.You can use 4th inner hexagon spanner to untie the bolt,and then use 8th outer hexagon spanner to untie outer bolt,after adjusting,please screw the bolt. Attention: 1.Please use the PVC card(85mm x 55mm) CR-80 standard. 2.When turning the characters plate,please don't drop down the hand-haft. 3.When switch the embossment size, please ward off the card frame slightly to avoid damage. 4.Never put hand or other hard objects into the machine. 5.Please move the card frame to the left end when not using the machine. 6.If the imprinted character may be deeper or shallower,undesirable,then it can be adjusted by adjusting screw in the regulation. Means:use the Z outside-hexagonal spanner along with the code sprinter to a little loose the hold-down nut,and then inside-hexagonal spanner with the code sprinter to adjust the middle regulating screw. Attention:turning the regulating screw in clockwise may deepen the typed characters while clockwise turning may lighten the typed characters.After finishing,please use the inside-hexagonal spanner with the code sprinter to make the regulating srcew stable,and then use the Z outside-hexagonal spanner to fasten the hold-downscrew. Kindly Notice: Due to the effort saving design, please do not pull the lever too hard during your operation in order to protect the machine. Package Content 1 x PVC Card Embossing Machine 1 x Punch Handle 1 x Handle Fastening Screw 1 x Sample PVC Card 1 x Set of Hardware 1 x User's Manual Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed 1. We only accept payment via PayPal, other payment is not acceptable. 2. Please make sure your shipping address is the same of your ebay address before you pay. We will not be responsible for such a case if you change you shipping address as we have shipped your items out. 1. We only ship to Europe;US;CA;FR;IT;ES. 2. We only ship to confirmed ebay address; your ebay address must match your Shipping address. 3. Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy. Shipping fee has including the local handing and packaging fee. 4. All the items will be shipping within 1-2 working days after receiving the payment, except some holidays. 5. We will not be responsible for any custom delay or tax, because transit time is highly depended and provided by postal Service. 1.If you have not satisfied as you received the item, please return it within 30 days for a replacement or money back. Please contact me before you return it. 2.All returned items must be in the original packaging with all components and accessories included, and you must provide us the return shipping information (The shipment or the tracking number) 3.Return shipping fee is to be paid by the buyers. We will not be responsible for any custom duty or import tax 1.One Year Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). 2.Defective items must be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID. We do not repair or replace items with an expired warranty. 1. We will be appreciated that you can leave us positive feedback with five starts if you are satisfied with our items and our service. We will do the best feedback for you too. 2. Feedback is very important to us, so hope you can contact us immediately before you give us neutral or negative feedback, we would glad to solve any problems for you. Powered by SoldEazy On Nov-06-16 at 22:23:07 PST, seller added the following information:On Nov-06-16 at 22:24:14 PST, seller added the following information:
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
