750pc Set Sae Nuts Bolts Washers + 40 Organizer Bins Grade 5 Coarse Machine Hex

US $130

Galloway, Ohio, United States
Jun 25th

Open on mobile:
QR code

750 Piece SAE Nut & Bolt Set ~ With 40 Plastic Bin Garage Wall Storage Organizer Grade 5 USS Course Thread Mount the bins on a wall, or set them on a workbench, and you'll have the fasteners you need, when you need them. Includes 40 heavy-duty, 3"x4"x5" plastic bins with identification labels, and wall rack. Machine bolts have coarse thread. •Grade 5 hex cap screws• Grade 2 flat washers • Lock washers and nuts in sizes in 1/2 increments from (1"to 3"in lengths) 5/16 to 5/8 • (40) heavy-duty plastic bins (Size approx 5" Deep x 4" Wide x 3" High and 1" High Front Lip) with identification labels • Wall mounting racks (wall or surface mount, brackets hold bins 4 to a row) 187 Machine Bolts 187 Nuts 187 Flat Washers 187 Split-Lock Washers 40 Bins & Rack Contents: (64) 5/16 inch Machine Bolts (1 inch, 1-1/2 inch, 2 inch, 2-1/2 inch, 3 inch) (48) 3/8 inch Machine Bolts (1 inch, 1-1/2 inch, 2 inch, 2-1/2 inch, 3 inch) (40) 7/16 inch Machine Bolts (1 inch, 1-1/2 inch, 2 inch, 2-1/2 inch, 3 inch) (20) 1/2 inch Machine Bolts (1 inch, 1-1/2 inch, 2 inch, 2-1/2 inch, 3 inch) (15) 5/8 inch Machine Bolts (1 inch, 1-1/2 inch, 2-1/2 inch, 3 inch, 3-1/2 inch) (187) Nuts (5/16 inch-18 thru 5/8 inch-11) (187) Grade-2 Flat Washers (5/16 inch thru 5/8 inch) (187) Split-Lock Washers (5/16 inch thru 5/8 inch) Wall Rack With 40 Bins, ID Labels Customer Reviews: 5.0 out of 5 starsGreat value By Ryan R Branfort I looked at bolt assortments for several months before settling on this set. I am very pleased with the product. Very good selection of "real" bolts, not a bunch of small screws and the like. There 40 different products, eight each of five different sizes. This makes it convenient to arrange the boxes. I set mine up so all all 5/8" are in one row, 1/2" in a row...etc...then all nuts are in one column, all 2" long bolts in one column...etc. 5.0 out of 5 starsGreat price. By Jerry The bolts are bolts. The nuts are nuts. The washers are washers. They are exactly what I expected and lots of sizes. Not grade 8 bolts but they are plenty good for most situations. They were such a good price that they are still WELL worth it even if you throw away the plastic trays. I like the trays though and put them on the wall in our shop. Not the best quality but no reason they should wear out or break. The labels are totally worthless though don't even bother to put them on they just fall off. just write on the trays with a permanent marker. Overall very good deal and I highly recommend. Beats going to the hardware store every time I need a bolt and I'm sure it will pay for itself within a few years besides the convenience. 5.0 out of 5 starsGreat set of nuts and bolts! By Just the man This is a great starter set with lots of options for bolt sizes. I'm always looking for a spare in my "spare" bolt, washer, nut bin and always struggle, so I decided to get this set. It'll take a while to put it together, especially if you want to hang it on the wall like I did. I found a space and did both the SAE and metric models side-by-side and they look pretty good. Expect to spend at least 2-3 hours screwing them to a wall. Also, they aren't stud spacing friendly and I was only able to get one screw for each bracket into a stud, but I think it'll be enough. This is also my hat wall: hats that I have found or have been given to me. 4.0 out of 5 starsGreat DIY bolt and nut supply By RAW One The best value I have seen for the basic assortment range of machine bolts and nuts. Plastic bins are very adequate and stack fine, using the included wall brackets would take up quite a lot of unnecessary space if you dont have a large size workshop. Be prepared to spend an hour cutting labels and filling and stacking bins. Five stars if on the larger size bolts they included 4-6 rather than just 3 4.0 out of 5 starsNot a bad deal By Mike Walker It's not a bad deal for a base fastener storage capability. I ordered both the metric and SAE versions. All the hardware showed up. No instructions so scratched my head a few times but easy enough to figure out what was required. Attaching the bins to a base (in my case a piece of plywood), mounting the base to the wall, sticking on the lables and then sorting the correct bolts and nuts into the bins took two to three hours to accomplish. After everything is in you'll probably want to take a trip to your hardware store and stock up on some of the more frequent use items - for me the 5/16" and 3/8" - your milage may vary. There is nothing worse than breaking off a project and making a home depot run because you dont have the right bolt/nut so for me these storage aids are a great deal. I'm giving this a four star because of no instructions and maybe a bit skimpy on 5/16" and 3/8" hardware but this is really no big deal for most buyers. 5.0 out of 5 starsExceptional value By C. Nordt I became interested in keeping a few nuts and bolts in my workshop after having to make frequent trips to the hardware store to fix anything. The nearest hardware store is a 10 minute drive away, and unless you buy in a quantity of 100 there's a substantial markup, so it's not unusual to spend $5 on just a few nuts and bolts. It made sense to keep my own stock. ______________________________________________ NO SALES TAX & FREE SHIPPING!!!! ______________________________________________ - Most items will be shipped within 1-2 business days after receiving payment.. -Free shipping is to the lower 48 States only and does not include PO boxes or military address - If you need any assistance, please kindly contact us via eBay message. If there are any problems with your purchase, you are 100% covered by us Thank you, and you are welcome back anytime!