+ Post new Ad
8" precision horizontal & vertical rotary table, US $249.00 – Picture 0
8" precision horizontal & vertical rotary table, US $249.00 – Picture 0

8" Precision Horizontal & Vertical Rotary Table

US $249.00

  • Duluth, Georgia, United States
  • Jan 30th
Open on mobile:
QR code
Item No. 535 - 0408 If you are looking for the table to do a prefessional job, this is a right choice , the best quality.  Descriptions: This table is a high precision tool which can be used in either the vertical or horizontal position. It has the basic weight to stabilize vibrations and provide the rotary machining for which it was designed to accomplish. This unit will provide for all general shop usage. It has an oil bath lubrication system which allows for an extremely smooth turning operation. In general a very high quality shop tool which allows CNC type cuts to be performed on a manual machine at a very reasonable price. Specifications: Diameter of table:  8"  ( 200 mm )   Morse taper center hole: MT3   Diameter of center hole:  1.1811" x 0.2362"    Center height for vertical mounting: 5.31"    Width of T-slot:  0.4724"    4  T - Slots   Width of locating key: 0. 629"    Transmission ratio of worm gear: 1:90   Vernier reading:  10"   Indexing accuracy: 80"   Maximum working load: 330 lbs ( horizontally )   Maximum working load: 165 lbs ( vertically )   Surface to center slot squareness 0.0003" Taper center bore TIR 0.0005" Surface to base parallelism 0.0008" Surface to angle face squareness 0.0004" Center bore TIR 0.001"  Dividing Plate and tailstock are optional parts which are being listed on Ebay as well.     8" = T13200B        
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer universal

Directions

Similar products from Rotating Tables

ACER VU-100 Universal Tilting Rotary Table

ACER VU-100 Universal Tilting Rotary Table

  • Fullerton, California, United States
  • Jan 30th
ACER TS-2 Tailstock for BS-1,CC-6, CS-6, HV-8

ACER TS-2 Tailstock for BS-1,CC-6, CS-6, HV-8

  • Fullerton, California, United States
  • Jan 30th
ACER TS-1 Tailstock for HV-4, HV-6, VUT-6, VU-100, VU-150, VSI-4, VSI-5, BS-0

ACER TS-1 Tailstock for HV-4, HV-6, VUT-6, VU-100, VU-150, VSI-4, VSI-5, BS-0

  • Fullerton, California, United States
  • Jan 30th
ACER HV-16 16" Horizontal/Vertical Rotary Table

ACER HV-16 16" Horizontal/Vertical Rotary Table

  • Fullerton, California, United States
  • Jan 30th
ACER CC-6 Simple Indexing Spacer

ACER CC-6 Simple Indexing Spacer

  • Fullerton, California, United States
  • Jan 30th
RARE! GENUINE CUSHMAN 5C90 INDEX SPACER FOR 5C COLLETS - VERTICAL OR HORIZONTAL

RARE! GENUINE CUSHMAN 5C90 INDEX SPACER FOR 5C COLLETS - VERTICAL OR HORIZONTAL

  • United States
  • Jan 30th
MITUTOYO TRAVERSE TABLE 160MM 178-051

MITUTOYO TRAVERSE TABLE 160MM 178-051

  • Chandler, Arizona, United States
  • Jan 30th
6" precision horizontal and vertical rotary table

6" precision horizontal and vertical rotary table

  • Lawrenceville, Georgia, United States
  • Jan 30th
Jacobs Spindle Nose Lathe Chuck

Jacobs Spindle Nose Lathe Chuck

  • Johnson City, New York, United States
  • Jan 30th
Allenair 7" Pneumatic Rotary Index Table Model 725-EC FREE SHIP

Allenair 7" Pneumatic Rotary Index Table Model 725-EC FREE SHIP

  • Valencia, California, United States
  • Jan 30th
4 Inch Horizontal and Vertical Rotary Table-New

4 Inch Horizontal and Vertical Rotary Table-New

  • Chino, California, United States
  • Jan 30th
8" HARTFORD SUPER SPACER 3 JAW CHUCK FACE PLATE & 6 MASKING PLATES, 24 DIVISIONS

8" HARTFORD SUPER SPACER 3 JAW CHUCK FACE PLATE & 6 MASKING PLATES, 24 DIVISIONS

  • Pinellas Park, Florida, United States
  • Jan 30th
NEW Adjustable TAILSTOCK for 4" & 6" ROTARY TABLE

NEW Adjustable TAILSTOCK for 4" & 6" ROTARY TABLE

  • Carrollton, Ohio, United States
  • Jan 30th
4" HORIZONTAL & VERTICAL PRECISION ROTARY TABLE, Part#TSL100- NEW

4" HORIZONTAL & VERTICAL PRECISION ROTARY TABLE, Part#TSL100- NEW

  • Madison Heights, Michigan, United States
  • Jan 30th
16" PRECISION TILTING ROTARY TABLE, Part#TSK-400- NEW

16" PRECISION TILTING ROTARY TABLE, Part#TSK-400- NEW

  • Madison Heights, Michigan, United States
  • Jan 30th
Troyke DL Rotary Table DL-15-A

Troyke DL Rotary Table DL-15-A

  • Kearney, Missouri, United States
  • Jan 30th
4" HORIZONTAL / VERTICAL MINI ROTARY TABLE B451

4" HORIZONTAL / VERTICAL MINI ROTARY TABLE B451

  • Montville, Ohio, United States
  • Jan 30th
Cincinatti Milacron Angular Checking Device w/ Case & Instructions EN16

Cincinatti Milacron Angular Checking Device w/ Case & Instructions EN16

  • Bloomfield, Connecticut, United States
  • Jan 30th
Dividing Plate For 4 Inch Horizontal /Vertical Rotary Table

Dividing Plate For 4 Inch Horizontal /Vertical Rotary Table

  • Chino, California, United States
  • Jan 30th
60 Inch High Performance Machine Rotary Table (Inv.29973)

60 Inch High Performance Machine Rotary Table (Inv.29973)

  • Portland, Connecticut, United States
  • Jan 30th

People who viewed this item also vieved

SUBURBAN TOOLMAKERS SINE VISE SV-337-S1 STK5817

SUBURBAN TOOLMAKERS SINE VISE SV-337-S1 STK5817

  • Wadley, Alabama, United States
  • May 30th
Toggle Switch Cover-Up White Taymac Corp Standard Switch Plate MW 5070W

Toggle Switch Cover-Up White Taymac Corp Standard Switch Plate MW 5070W

  • San Antonio, Texas, United States
  • May 30th
VTG. MACHINIST ANGLE BLOCK , 3" x 3" x 3 1/2"W

VTG. MACHINIST ANGLE BLOCK , 3" x 3" x 3 1/2"W

  • Berlin, Connecticut, United States
  • May 30th
TTC T230-4162 5C Round Collet - Size: 31/32', THREAD: 1.240' x 20 RH (Pack of 3)

TTC T230-4162 5C Round Collet - Size: 31/32', THREAD: 1.240' x 20 RH (Pack of 3)

  • Duncan, South Carolina, United States
  • May 31st
TTC T230-4146 5C Round Collet - Size: 23/32', THREAD: 1.240' x 20 RH (Pack of 3)

TTC T230-4146 5C Round Collet - Size: 23/32', THREAD: 1.240' x 20 RH (Pack of 3)

  • Duncan, South Carolina, United States
  • May 31st
TTC T230-4142 5C Round Collet - Size: 21/32', THREAD: 1.240' x 20 RH (Pack of 3)

TTC T230-4142 5C Round Collet - Size: 21/32', THREAD: 1.240' x 20 RH (Pack of 3)

  • Duncan, South Carolina, United States
  • May 31st
#5 Morse Taper Dead Center for Lathe

#5 Morse Taper Dead Center for Lathe

  • Sellersville, Pennsylvania, United States
  • Jun 1st
DTF LATHE DEAD CENTER MT4 TAPER

DTF LATHE DEAD CENTER MT4 TAPER

  • Jupiter, Florida, United States
  • Jun 1st
The Ready Tool Co Live Center , R-24 HD , #4 Morse Taper , 4MT

The Ready Tool Co Live Center , R-24 HD , #4 Morse Taper , 4MT

  • Alamo, California, United States
  • Jun 1st
Buck 2124R 12" Lathe Chuck 2 Piece 3 Jaw Adjust Tru 3 1/4" Through Hole

Buck 2124R 12" Lathe Chuck 2 Piece 3 Jaw Adjust Tru 3 1/4" Through Hole

  • Sanford, Florida, United States
  • Jun 2nd
Cushion 10" Independent 4 Jaw Lathe Chuck 2 1/2" thru bore LO L O Mount

Cushion 10" Independent 4 Jaw Lathe Chuck 2 1/2" thru bore LO L O Mount

  • Sanford, Florida, United States
  • Jun 2nd
Burned England 8" Independent 4 Jaw Lathe Chuck 1 5/8" thru bore LO L O Mount

Burned England 8" Independent 4 Jaw Lathe Chuck 1 5/8" thru bore LO L O Mount

  • Sanford, Florida, United States
  • Jun 2nd
Toggle Plier Clamp Machinist Tool Detroit Stamping #464 (E)

Toggle Plier Clamp Machinist Tool Detroit Stamping #464 (E)

  • Vinton, Virginia, United States
  • Jun 2nd
#412 (14298) WILTON HEAVY DUTY DROP FORGED C-CLAMP 12" ***NEW***

#412 (14298) WILTON HEAVY DUTY DROP FORGED C-CLAMP 12" ***NEW***

  • Tremont, Illinois, United States
  • Jun 2nd
BOLTS FOR TEE SLOT NUTS, 8" IN LENGTH, 3/8"-16 THREAD, SIZE LOT 12

BOLTS FOR TEE SLOT NUTS, 8" IN LENGTH, 3/8"-16 THREAD, SIZE LOT 12

  • Portland, Oregon, United States
  • Jun 2nd
Presicion Grinding / EDM Cube

Presicion Grinding / EDM Cube

  • Hartford, Connecticut, United States
  • Jun 3rd
VINTAGE CRAFTSMAN Swivel Vise 506-51801 STEAMPUNK STYLE USA MADE

VINTAGE CRAFTSMAN Swivel Vise 506-51801 STEAMPUNK STYLE USA MADE

  • Chandler, Arizona, United States
  • Jun 3rd
QTY 2, PNEUMATIC VISES AIR VISE FROM MACHINE SHOP, VINTAGE MFG 1972, LOT QTY 2

QTY 2, PNEUMATIC VISES AIR VISE FROM MACHINE SHOP, VINTAGE MFG 1972, LOT QTY 2

  • San Marcos, California, United States
  • Jun 3rd
MACHINIST'S V BLOCK

MACHINIST'S V BLOCK

  • Augusta, Maine, United States
  • Jun 11th
THREE MACHINIST BLOCKS

THREE MACHINIST BLOCKS

  • Baldwinville, Massachusetts, United States
  • Jun 11th
MACHINE V BLOCK

MACHINE V BLOCK

  • Baldwinville, Massachusetts, United States
  • Jun 11th
"Fancy Fleece Slotted Ruler-9-1/2""X16"""

"Fancy Fleece Slotted Ruler-9-1/2""X16"""

  • Hickory Hills, Illinois, United States
  • Jun 19th
"Doodlebug Double-Sided Paper Pack 12""X12""-Slam Dunk"

"Doodlebug Double-Sided Paper Pack 12""X12""-Slam Dunk"

  • Hickory Hills, Illinois, United States
  • Jun 19th
ATS Workholding S30 Pull Back Collet Chuck, A8-S30H for A2-8 Spindle, Used

ATS Workholding S30 Pull Back Collet Chuck, A8-S30H for A2-8 Spindle, Used

  • Tucson, Arizona, United States
  • Jun 19th
Taft-Peirce Right Angle Iron 8" X 5" X 4.5" Machinist Angle Iron Straight Edge

Taft-Peirce Right Angle Iron 8" X 5" X 4.5" Machinist Angle Iron Straight Edge

  • Saint Louis, Missouri, United States
  • Jun 21st
EXCELLO-RIGHT ANGLE ATTACHMENT USED... R8 MOUNT

EXCELLO-RIGHT ANGLE ATTACHMENT USED... R8 MOUNT

  • Deville, Louisiana, United States
  • Jun 22nd
SIGNATONE MODEL S-725-CRM MICROPOSITIONER (MP)

SIGNATONE MODEL S-725-CRM MICROPOSITIONER (MP)

  • Bosque Farms, New Mexico, United States
  • Jun 22nd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies