+ Post new Ad
8
8

8" Steel Soft Jaws 1.5mm X 60 Deg Serrated For B-208 Type Lathe Chucks 2.0" Used- Show Original Title

US $1600

  • Post Falls, Idaho, United States
  • May 9th
Open on mobile:
QR code
1 Set of Steel Pointed Soft Jaws for 8" B208 type chucks. the item pictured is what you will receive. I had a Ikegei CNC lathe and had a few sets of these jaws that came with the machine. These are used, just for a small job only. The cut on the face of the jaws is less than 1/4" diameter and around 3/16" deep. So there is a whole lot of tool left here for the money! •Jaw Type:  Fits CNC lathe chucks with 1.5mm x 60 degrees serrations •Size:  8" diameter size chucks •Height:  2.0" Tall •Groove Width:  0.551" (14mm) •Hole Space:  0.984" (25mm) •Screw Size:  M12 •Material:  Steel CF-1018 •Compatibility:  was on the machine I owned with a Hitachi-Seiki Chuck •QTY:  Set of 3 pcs All items are sold "as is" but seriously, if you ever have a problem, please let me know! Check out my other auctions for some great tools and machine shop items. Thanks for looking and good luck on all your bidding! Have a great day!  

Directions

Similar products from Lathe Chucks

10" Oversized (Extension) Aluminum Jaws 1.5mm x 60° Serrated for B-210 Chucks

10" Oversized (Extension) Aluminum Jaws 1.5mm x 60° Serrated for B-210 Chucks

  • Placentia, California, United States
  • May 14th
10" Oversized (Extension) Steel Jaws 1.5mm x 60° Serrated for B-210 Chucks *USA*

10" Oversized (Extension) Steel Jaws 1.5mm x 60° Serrated for B-210 Chucks *USA*

  • Placentia, California, United States
  • May 14th
RIDGID 43900 Jaw Chuck w/Teeth Inserts D-475-2X NEW, NEVER USED!

RIDGID 43900 Jaw Chuck w/Teeth Inserts D-475-2X NEW, NEVER USED!

  • Fraser, Michigan, United States
  • May 13th
RIDGID 46500 Center Jaw Set E-631 NEW, NEVER USED!

RIDGID 46500 Center Jaw Set E-631 NEW, NEVER USED!

  • Fraser, Michigan, United States
  • May 13th
10" Bison 3 Jaw Forged Lathe Chuck A-8 Direct Mount 2 pc Hard Jaws 7-821-1016

10" Bison 3 Jaw Forged Lathe Chuck A-8 Direct Mount 2 pc Hard Jaws 7-821-1016

  • Carrollton, Ohio, United States
  • May 12th
NEW SMW 012497 TONGUE & GROOVE SOFT TOP JAWS

NEW SMW 012497 TONGUE & GROOVE SOFT TOP JAWS

  • Cleveland, Ohio, United States
  • May 11th
1 Set #4 Warner & Swasey Collet Pads Pick your Size

1 Set #4 Warner & Swasey Collet Pads Pick your Size

  • Joplin, Missouri, United States
  • May 11th
Kitagawa HOH-06K Lathe Chuck CNC

Kitagawa HOH-06K Lathe Chuck CNC

  • Gainesville, Florida, United States
  • May 10th
Lathe chuck

Lathe chuck

  • Fairmont, North Carolina, United States
  • May 10th
Lathe Chuck Drive Plate Face Dogs Armstong Atlas 10" South Bend Logan 1-1/2-8

Lathe Chuck Drive Plate Face Dogs Armstong Atlas 10" South Bend Logan 1-1/2-8

  • Roselle, Illinois, United States
  • May 10th
USED 10" 4-JAW INDEPENDENT LATHE CHUCK TYPE L00 BACK

USED 10" 4-JAW INDEPENDENT LATHE CHUCK TYPE L00 BACK

  • Toledo, Ohio, United States
  • May 9th
10" 3 Jaw Chuck

10" 3 Jaw Chuck

  • Jefferson City, Missouri, United States
  • May 9th
1 Lot Of 22 Woodworth PC-128-45C Chuck Jaws

1 Lot Of 22 Woodworth PC-128-45C Chuck Jaws

  • Peoria, Illinois, United States
  • May 8th
Atlas 10-795B 3 Jaw Lathe 6" Chuck 1-1/2" - 8 tpi mount

Atlas 10-795B 3 Jaw Lathe 6" Chuck 1-1/2" - 8 tpi mount

  • Chesterland, Ohio, United States
  • May 8th
Assorted Machinist Tools

Assorted Machinist Tools

  • Johnson City, New York, United States
  • May 7th
USED BUCK CHUCK ADJUST TRU D1-8 CAMLOCK ADAPTER BACK PLATE (C-267)

USED BUCK CHUCK ADJUST TRU D1-8 CAMLOCK ADAPTER BACK PLATE (C-267)

  • Fairfield, Iowa, United States
  • May 6th
36" Round Magnetic Chuck for Blanchard Grinding

36" Round Magnetic Chuck for Blanchard Grinding

  • Turtle Creek, Pennsylvania, United States
  • May 5th
6" 4 Jaw Lathe Chuck

6" 4 Jaw Lathe Chuck

  • Logan, Iowa, United States
  • May 4th
Bison 5" 3-Jaw (2-Pcs. Rev.) Self-Centering Rotating Lathe Chuck w/MT#4 Shank

Bison 5" 3-Jaw (2-Pcs. Rev.) Self-Centering Rotating Lathe Chuck w/MT#4 Shank

  • Hamden, Connecticut, United States
  • May 3rd
4" 3 JAW CHUCK WOTH 5C BACK STK2719

4" 3 JAW CHUCK WOTH 5C BACK STK2719

  • Wadley, Alabama, United States
  • May 2nd

People who viewed this item also vieved

IDEAL PRECISION LIVE CENTER MODEL 49-303 3 MORSE TAPER SHANK

IDEAL PRECISION LIVE CENTER MODEL 49-303 3 MORSE TAPER SHANK

  • Jamestown, New York, United States
  • Jan 30th
BULL NOSE DEAD CENTERS SET OF 3 TAPER SHANK

BULL NOSE DEAD CENTERS SET OF 3 TAPER SHANK

  • Jamestown, New York, United States
  • Jan 30th
BULL NOSE DEAD CENTERS SMALL SIZE SET OF 3 TAPER SHANK

BULL NOSE DEAD CENTERS SMALL SIZE SET OF 3 TAPER SHANK

  • Jamestown, New York, United States
  • Jan 30th
Vintage Brown & Sharpe Mfg Parallel Machinist Clamps 754-B-1 & 754-C-1 1/2

Vintage Brown & Sharpe Mfg Parallel Machinist Clamps 754-B-1 & 754-C-1 1/2

  • Bridgewater, New Jersey, United States
  • Jan 30th
4 TE-CO Tapped End Clamps, 1-1/4 X 4 X 5/8 (30912)

4 TE-CO Tapped End Clamps, 1-1/4 X 4 X 5/8 (30912)

  • Grants Pass, Oregon, United States
  • Jan 30th
Assorted hold down clamps, T-slot nuts

Assorted hold down clamps, T-slot nuts

  • Portsmouth, New Hampshire, United States
  • Jan 30th
4 Lathe Collets R8 3/4 5/8 1/2 3/8

4 Lathe Collets R8 3/4 5/8 1/2 3/8

  • Comstock Park, Michigan, United States
  • Jan 30th
USED 9/16 SUTTON 5C COLLET

USED 9/16 SUTTON 5C COLLET

  • Pinellas Park, Florida, United States
  • Jan 30th
USED 3/16 HARDINGE 5C HEX COLLET, INTERNAL THREADS

USED 3/16 HARDINGE 5C HEX COLLET, INTERNAL THREADS

  • Pinellas Park, Florida, United States
  • Jan 30th
Met-Klamp Jaw (Inv.22226)

Met-Klamp Jaw (Inv.22226)

  • Portland, Connecticut, United States
  • Jan 30th
Met-Klamp Jaw with hold down clamps

Met-Klamp Jaw with hold down clamps

  • Portland, Connecticut, United States
  • Jan 30th
MetKlamp V Vises

MetKlamp V Vises

  • Portland, Connecticut, United States
  • Jan 30th
NICE MAHR Germany 0-3mm Small Dial INDICATOR Grad 0.01mm 34mm Dial Face #2A58

NICE MAHR Germany 0-3mm Small Dial INDICATOR Grad 0.01mm 34mm Dial Face #2A58

  • Perth, Ontario, Canada
  • Jan 30th
8 Foot Machanical Brake Press

8 Foot Machanical Brake Press

  • Omro, Wisconsin, United States
  • Jan 30th
Brake Tie section

Brake Tie section

  • Omro, Wisconsin, United States
  • Jan 30th
Speedy Air Vise model 60-A pneumatic vise

Speedy Air Vise model 60-A pneumatic vise

  • Berlin, Connecticut, United States
  • Jan 30th
Wilton PowRarm #344 Adjustable with Millers Falls #217 Machinist Vise

Wilton PowRarm #344 Adjustable with Millers Falls #217 Machinist Vise

  • Seward, Illinois, United States
  • Jan 30th
PANAVISE 381 Vacuum Base Portable Vise Worlds' Most Portable Holding Tool NIB

PANAVISE 381 Vacuum Base Portable Vise Worlds' Most Portable Holding Tool NIB

  • Fulton, New York, United States
  • Jan 30th
Brown & Sharpe #750B V-BLOCKS with Clamps

Brown & Sharpe #750B V-BLOCKS with Clamps

  • Middletown, Virginia, United States
  • Mar 8th
Starrett All Angle V-Block #567 & Massi V-Block #56 with clamps

Starrett All Angle V-Block #567 & Massi V-Block #56 with clamps

  • Middletown, Virginia, United States
  • Mar 8th
Brown & Sharpe Machinist V Block & Clamp No. 749 - 2" x 1 1/2" x 1 1/2"

Brown & Sharpe Machinist V Block & Clamp No. 749 - 2" x 1 1/2" x 1 1/2"

  • Middletown, Virginia, United States
  • Mar 8th
HAAS HRT-210 ROTARY TABLE 4TH AXIS FOR HAAS CNC MILLS

HAAS HRT-210 ROTARY TABLE 4TH AXIS FOR HAAS CNC MILLS

  • West Milford, New Jersey, United States
  • Mar 12th
Troyke Mfg. Co. R-12 Rotary Table 12 Inch Diameter (Inv.32784)

Troyke Mfg. Co. R-12 Rotary Table 12 Inch Diameter (Inv.32784)

  • Portland, Connecticut, United States
  • Mar 12th
yuasa rotary table

yuasa rotary table

  • Sodus, Michigan, United States
  • Mar 25th
Universal Kwik-Switch #AF80236 1/2" AF Collet Chuck

Universal Kwik-Switch #AF80236 1/2" AF Collet Chuck

  • Garden City, Idaho, United States
  • Mar 25th
2 UNIVERSAL ENG ACURA-FLEX 3/4" COLLET CHUCKS w/ CAT40 SHANKS + 3/8" COLLET

2 UNIVERSAL ENG ACURA-FLEX 3/4" COLLET CHUCKS w/ CAT40 SHANKS + 3/8" COLLET

  • Covina, California, United States
  • Mar 25th
TECNARA TG100 COLLET CHUCK w/ BT50 SHANK + 2 COLLETS

TECNARA TG100 COLLET CHUCK w/ BT50 SHANK + 2 COLLETS

  • Covina, California, United States
  • Mar 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies