+ Post new Ad
#84064 MORSE/MARXMAN CARBIDE TIPPED REBAR CUTTER 3/4" X 12" ***NEW***, US $95 – Picture 0
#84064 MORSE/MARXMAN CARBIDE TIPPED REBAR CUTTER 3/4" X 12" ***NEW***, US $95 – Picture 0

#84064 Morse/marxman Carbide Tipped Rebar Cutter 3/4" X 12" ***new***

US $95

  • Tulsa, Oklahoma, United States
  • Jun 9th
Open on mobile:
QR code
 #84064 MORSE/MARXMAN CARBIDE TIPPED REBAR CUTTER 3/4" X 12" ***NEW*** Rebar Cutter - Carbide Tipped For use in drilling through concrete-embedded reinforcing bars or wire mess Important Rebar Cutter Technical Information: Use a masonary drill or hammer bit to first drill concrete until the rebar or wire mess is reach. The drill must than be stopped at once when contact is made. (Any carbide tipped will fail if not stopped!) Using a 1/2 chuck drill motor, place the rebar cutter into the hole and drill through the embedded rebar or wire mess while maintaining an even and constant pressure. Once the rebar or wire mess is drilled, clean chips from hole and continue drilling with the standard masonary drill or hammer bit from the first step. CAUTION - The rebar cutter can be used in most 1/2 chuck drill motors with a rated no-load speed of 400-1200 RPM. When using a hammer drill the selector must remain in the rotary-only position. Percussion (hammering) will damage the rebar cutter. The cutter is designed for rotary drilling only. Technical Specifications Brand Name MARXMAN™ Maintenance Tools Class Fractional Diameter 3/4 List No. 522 Material Carbide Tipped Origin Made In U.S.A. Overall Length 12 Package Quantity 1 Shank Diameter 1/2 Type Rebar Cutter UPC Code 683420840649

Directions

Similar products from Bits, Chisels & Breaker Points

(3) 3/16 X 4x6 Dewalt SDS-PLUS Hammer Drill Bit, Concrete, Masonry GERMANY

(3) 3/16 X 4x6 Dewalt SDS-PLUS Hammer Drill Bit, Concrete, Masonry GERMANY

  • Cantonment, Florida, United States
  • Jun 9th
Bosch HC2081B25 1/2-Inch x 4-Inch x 6-Inch S4 SDS Plus Rotary Hammer Bit 25-Pack

Bosch HC2081B25 1/2-Inch x 4-Inch x 6-Inch S4 SDS Plus Rotary Hammer Bit 25-Pack

  • USA, United States
  • Jun 9th
Bosch HC4501 3/8-Inch x 8-Inch x 13-Inch Spline Rotary Hammer Bit

Bosch HC4501 3/8-Inch x 8-Inch x 13-Inch Spline Rotary Hammer Bit

  • USA, United States
  • Jun 9th
#RB 16HO RELTON CARBIDE TIPPED ROTARY REBAR CUTTER 1" X 4" ***NEW***

#RB 16HO RELTON CARBIDE TIPPED ROTARY REBAR CUTTER 1" X 4" ***NEW***

  • Tulsa, Oklahoma, United States
  • Jun 9th
#PB112518 TRUCUT MFG / GALAXY HAMMER BIT w/ SPLINE SHANK 1-1/8" X 18" ***NEW***

#PB112518 TRUCUT MFG / GALAXY HAMMER BIT w/ SPLINE SHANK 1-1/8" X 18" ***NEW***

  • Tulsa, Oklahoma, United States
  • Jun 9th
#SDS100010 TRUCUT HAMMER BIT w/ SDS PLUS SHANK 1" X 10-3/4" ***NEW***

#SDS100010 TRUCUT HAMMER BIT w/ SDS PLUS SHANK 1" X 10-3/4" ***NEW***

  • Tulsa, Oklahoma, United States
  • Jun 9th
KLEIN TOOLS CARBIDE TIPPED HOLE CUTTER 7/8" 31875

KLEIN TOOLS CARBIDE TIPPED HOLE CUTTER 7/8" 31875

  • Miami, FL, United States
  • Jun 9th
#48-20-3958 MILWAUKEE MAGNUM HAMMER BIT w/ SDS MAX SHANK 1-1/16" X 23" ***NEW***

#48-20-3958 MILWAUKEE MAGNUM HAMMER BIT w/ SDS MAX SHANK 1-1/16" X 23" ***NEW***

  • Tulsa, Oklahoma, United States
  • Jun 9th
1 1/4" , 1.25 inch Masonry Carbide Drill Bit 16" long Spline Drive Quality Bit

1 1/4" , 1.25 inch Masonry Carbide Drill Bit 16" long Spline Drive Quality Bit

  • Port Charlotte, Florida, United States
  • Jun 9th
#TE-YX 1-13 HILTI HAMMER BIT w/ SDS MAX SHANK 1" X 13" ***NEW***

#TE-YX 1-13 HILTI HAMMER BIT w/ SDS MAX SHANK 1" X 13" ***NEW***

  • Tulsa, Oklahoma, United States
  • Jun 9th
#84061 MORSE/MARXMAN CARBIDE TIPPED REBAR CUTTER 9/16" X 12" ***NEW***

#84061 MORSE/MARXMAN CARBIDE TIPPED REBAR CUTTER 9/16" X 12" ***NEW***

  • Tulsa, Oklahoma, United States
  • Jun 9th
Hitachi 728841 3/4-Inch Hex with 6-Inch by 25-Inch Floor Scraper

Hitachi 728841 3/4-Inch Hex with 6-Inch by 25-Inch Floor Scraper

  • Kannapolis, North Carolina, United States
  • Jun 9th
TTC Cold Chisel - Model: 112 Length: 8" Cut: 1" Stock: 3/4" [pack of 3]

TTC Cold Chisel - Model: 112 Length: 8" Cut: 1" Stock: 3/4" [pack of 3]

  • Duncan, South Carolina, United States
  • Jun 9th
Chicago Latrobe 790 Solid Carbide Spotting Drill Bit Regular Length Uncoated ...

Chicago Latrobe 790 Solid Carbide Spotting Drill Bit Regular Length Uncoated ...

  • US, United States
  • Jun 9th
Irwin 88702 Bit Extension-6" EXTENSION BIT

Irwin 88702 Bit Extension-6" EXTENSION BIT

  • Brooklyn, New York, United States
  • Jun 9th
Century Drill & Tool Century 30604 Drill Stop Set, 4-Piece

Century Drill & Tool Century 30604 Drill Stop Set, 4-Piece

  • USA, United States
  • Jun 9th
Klein Tools 31876 Carbide Tipped Hole Cutter 1-1/8" for 3/4" Fittings

Klein Tools 31876 Carbide Tipped Hole Cutter 1-1/8" for 3/4" Fittings

  • Louisville, Kentucky, United States
  • Jun 9th
Hitachi 724956 SDS Max 2 1/2-Inch x 22-Inch Hammer Core Cutter

Hitachi 724956 SDS Max 2 1/2-Inch x 22-Inch Hammer Core Cutter

  • USA, United States
  • Jun 9th
Hitachi 725110 Spline 2-1/2-Inch x 12-Inch Hammer Core Cutter (1 PC)

Hitachi 725110 Spline 2-1/2-Inch x 12-Inch Hammer Core Cutter (1 PC)

  • USA, United States
  • Jun 9th
Hitachi 725130 1 1/8-Inch Hex 5-Inch x 17-Inch Hammer Asphalt Cutter

Hitachi 725130 1 1/8-Inch Hex 5-Inch x 17-Inch Hammer Asphalt Cutter

  • USA, United States
  • Jun 9th

People who viewed this item also vieved

NEW - 7/8" x .080" x 10mm Turbo Rim Stone Diamond Core Bit (Wet/Dry) - Vantage

NEW - 7/8" x .080" x 10mm Turbo Rim Stone Diamond Core Bit (Wet/Dry) - Vantage

  • Wethersfield, Connecticut, United States
  • Jan 30th
3 Milwaukee Percussion Carbide Hammer Drill Bit 5/8 x 6 inch 48-20-6620

3 Milwaukee Percussion Carbide Hammer Drill Bit 5/8 x 6 inch 48-20-6620

  • DeKalb, Illinois, United States
  • Jan 30th
4 Milwaukee Percussion Carbide Hammer Drill Bit 1/2 x 6 inch 48-87-0500 3/8 shan

4 Milwaukee Percussion Carbide Hammer Drill Bit 1/2 x 6 inch 48-87-0500 3/8 shan

  • DeKalb, Illinois, United States
  • Jan 30th
18 Volt Ridgid X4 Lith-Ion Radio Model R84084 & Battery R840084

18 Volt Ridgid X4 Lith-Ion Radio Model R84084 & Battery R840084

  • Clinton, Washington, United States
  • Jan 30th
New 18 Volt Bosch 1/2" Lith-Ion Drill Model DDS181

New 18 Volt Bosch 1/2" Lith-Ion Drill Model DDS181

  • Clinton, Washington, United States
  • Jan 30th
New 20 Volt Lith-Ium Dewalt Cordless 1/2" Drill/Driver & Bag Model DCD771

New 20 Volt Lith-Ium Dewalt Cordless 1/2" Drill/Driver & Bag Model DCD771

  • Clinton, Washington, United States
  • Jan 30th
3X SDS + PLUS HAMMER long Drills Drill Bits: 18MM, 20MM, 22MM. Double Flutes

3X SDS + PLUS HAMMER long Drills Drill Bits: 18MM, 20MM, 22MM. Double Flutes

  • Lidcombe, NSW, Australia
  • Jan 30th
2x JACKHAMMER Jack Hammer bit Moil & 35mm CHISEL No 226 30mm HEX Hitachi KANGO

2x JACKHAMMER Jack Hammer bit Moil & 35mm CHISEL No 226 30mm HEX Hitachi KANGO

  • Lidcombe, NSW, Australia
  • Jan 30th
2 pcs long SDS Max Moil Point & Flat Chisel 50mm; Length 400mm. NEW

2 pcs long SDS Max Moil Point & Flat Chisel 50mm; Length 400mm. NEW

  • Lidcombe, NSW, Australia
  • Jan 30th
DeWalt DW5721 1"X11"X16" Spline Rotary Hammer Bit

DeWalt DW5721 1"X11"X16" Spline Rotary Hammer Bit

  • Goodyear, Arizona, United States
  • Jan 30th
HILTI TE 76-P HAMMER DRILL,PREOWNED,EXCELLENT COND,FREE BITS & CHISELS,FAST SHIP

HILTI TE 76-P HAMMER DRILL,PREOWNED,EXCELLENT COND,FREE BITS & CHISELS,FAST SHIP

  • Las Vegas, Nevada, United States
  • Jan 30th
HILTI TE 30 ,PREOWNED, MINT COND.,FREE BITS,T-SHIRT,HAT,KNIFE, L@@K, FAST SHIP

HILTI TE 30 ,PREOWNED, MINT COND.,FREE BITS,T-SHIRT,HAT,KNIFE, L@@K, FAST SHIP

  • Las Vegas, Nevada, United States
  • Jan 30th
Atlas Copco Tensor ETD DL21-07-I06 Electric straight screwdriver

Atlas Copco Tensor ETD DL21-07-I06 Electric straight screwdriver

  • Uhrice, 69634, Czech Republic
  • Feb 16th
*** RIGID R6791 Collated Screw Gun ***

*** RIGID R6791 Collated Screw Gun ***

  • Danville, California, United States
  • Feb 16th
Makita Drywall Screwdriver 6.5A 0-6000 rpm 6825 L8

Makita Drywall Screwdriver 6.5A 0-6000 rpm 6825 L8

  • Locust Grove, Georgia, United States
  • Feb 16th
Milwaukee 1/2 in. Super Hawg Drill

Milwaukee 1/2 in. Super Hawg Drill

  • Norristown, Pennsylvania, United States
  • Feb 25th
DeWALT DW120 1/2" Right Angle Drill

DeWALT DW120 1/2" Right Angle Drill

  • Parkville, Maryland, United States
  • Feb 25th
** HEAVY DUTY ** MILWAUKEE 1107-1 RIGHT ANGLE PROFESSIONAL DRILL 1/2" Corded

** HEAVY DUTY ** MILWAUKEE 1107-1 RIGHT ANGLE PROFESSIONAL DRILL 1/2" Corded

  • Saulsbury, Tennessee, United States
  • Feb 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies