+ Post new Ad
AC/DC TIG/Plasma 200A MASTER TIG Digital IGBT Inverter Welder Topwell, US $7700 – Picture 0
AC/DC TIG/Plasma 200A MASTER TIG Digital IGBT Inverter Welder Topwell, US $7700 – Picture 0

Ac/dc Tig/plasma 200a Master Tig Digital Igbt Inverter Welder Topwell

US $7700

  • East Lansing, Michigan, United States
  • Jun 3rd
Open on mobile:
QR code
• DC+/DC-: Improved TIG starting. Now starts DC(-) to maintain a sharp tungsten. • Lift-Arc start provides AC or DC arc starting without the use of high frequency. • Adjustable AC output frequency allows the operator to focus the arc minimizing the heat affected zone. • Extended AC Balance Control helps maintain a pointed tungsten to direct the arc in the weld joint. • Independent amplitude/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode. • Multiple Waveshapes: Standard Squarewave for fast travel speeds and excellent puddle control, Soft squarewave for a soft buttery arc with maximum puddle control and good wetting action, Sine wave for a traditional softer sounding arc, Triangular wave to reduce the heat input into the weld at low amperage. • MIX TIG: we can get an excellent Arc Concentration, can be carried out the excellent welding performance from thin to thick plate. Item No.                Master TIG-200 AC Master TIG-250 AC Rated Input Voltage 1PH ~ 230V +/-15% 1PH ~ 230V +/-15% Max. Load Power Capacity TIG:  4.5KVA TIG:  6.3KVA   MMA: 5.6KVA MMA: 7.1KVA Rated Duty Cycle (40oC) 60% TIG:  200A/18V 60% TIG:  250A/20V     MMA: 160A/26.4V   MMA: 200A/28V   100% TIG:  160A/26.4V 100% TIG:  200A/18V     MMA: 130A/25.2V   MMA: 160A/26.4V Welding Current/Voltage Range TIG:  5A/10.2V~200A/18V   TIG:  5A/10.2V~250A/20V   MMA: 10A/20.4V~160A/26.4V MMA: 10A/20.4V~200A/28V Open Circuit Voltage 10V 10V Power Factor 0.73 0.73 Efficiency 80% 80% TIG Pulse Frequency 0.2Hz~50Hz 0.2Hz~50Hz   Pulse Width (Ratio) 1~100% 1~100%   Arc-starting Current 10A~160A 10A~200A   Crater-filling Current 5A~200A 5A~250A   Current Up-slope Time 0.1S~10S 0.1S~10S   Current Down-slop Time 0.1S~15S 0.1S~15S   Pre-Gas Time 0.1S~5S 0.1S~5S   Flow-Gas Time 0.1S~10S 0.1S~10S   Spot Arc Time 0.1S~10S 0.1S~10S MMA Arc Force 10A~100A 10A~160A   Hot Start Time 2S 2S   Hot Start Current 5A~100A 5A~160A Dimension (LxWxH) 490X230X385mm 490X230X385mm Weight (KG) 23KG 23KG

Directions

Similar products from Electric Welder Machines

MILLER DYNASTY 200 SD AND MAXSTAR 200 SD PARTS OR REPAIR

MILLER DYNASTY 200 SD AND MAXSTAR 200 SD PARTS OR REPAIR

  • Chicago, Illinois, United States
  • Jun 3rd
MILLER PIPEPRO 450 RFC MULTIPROCESS PULSED MIG TIG WELDING WELDER W/ DUAL FEEDER

MILLER PIPEPRO 450 RFC MULTIPROCESS PULSED MIG TIG WELDING WELDER W/ DUAL FEEDER

  • Brook Park, Ohio, United States
  • Jun 3rd
Campbell Hausfeld 115V 85-Amp Flux Cored Wire Feed Arc Welder Welding Machine

Campbell Hausfeld 115V 85-Amp Flux Cored Wire Feed Arc Welder Welding Machine

  • New Philadelphia, Ohio, United States
  • Jun 3rd
Miller high frequency machine

Miller high frequency machine

  • Stanford, Kentucky, United States
  • Jun 3rd
(New) Miller High Frequency Arc Starter Weld Stabilizer HF-251D-1 for Tig Welder

(New) Miller High Frequency Arc Starter Weld Stabilizer HF-251D-1 for Tig Welder

  • Centralia, Illinois, United States
  • Jun 3rd
Miller Delta Weld 450 welder cp

Miller Delta Weld 450 welder cp

  • DeKalb, Illinois, United States
  • Jun 3rd
Lincoln Welder SAE 300 The Miller Killer

Lincoln Welder SAE 300 The Miller Killer

  • Aurora, Colorado, United States
  • Jun 3rd
Chicago Electric Easy Mig 100 Arc Welder Welding System

Chicago Electric Easy Mig 100 Arc Welder Welding System

  • Glendora, California, United States
  • Jun 3rd
MILLER DELTAWELD 650 WELDER JG018797 WITH CART

MILLER DELTAWELD 650 WELDER JG018797 WITH CART

  • Hawthorne, California, United States
  • Jun 3rd
Miller Electric Robotic Interface II

Miller Electric Robotic Interface II

  • Iron River, Wisconsin, United States
  • Jun 3rd
Antique Orthodontic Mold Appliance 1937

Antique Orthodontic Mold Appliance 1937

  • Mahwah, New Jersey, United States
  • Jun 3rd
Miller 456P Invision MIG Welder With S-64M Wire Feeder - Used - AM14841

Miller 456P Invision MIG Welder With S-64M Wire Feeder - Used - AM14841

  • Cleveland, Ohio, United States
  • Jun 2nd
Miller 456P Invision MIG Welder With S-64M Wire Feeder - Used - AM14842

Miller 456P Invision MIG Welder With S-64M Wire Feeder - Used - AM14842

  • Cleveland, Ohio, United States
  • Jun 2nd
Mitutoyo Digimatic Mini Processor DP-2

Mitutoyo Digimatic Mini Processor DP-2

  • Converse, Texas, United States
  • Jun 2nd
Miller 456P Invision MIG Welder With S-64M Wire Feeder - Used - AM14843

Miller 456P Invision MIG Welder With S-64M Wire Feeder - Used - AM14843

  • Cleveland, Ohio, United States
  • Jun 2nd
Hobart 140 MIG Welder

Hobart 140 MIG Welder

  • Boise, Idaho, United States
  • Jun 2nd
HotSpot Thermocouple TC Welder

HotSpot Thermocouple TC Welder

  • Converse, Texas, United States
  • Jun 2nd
H&M 14"-20" Pipe Beveler Beveler 2C-20 mathey #1

H&M 14"-20" Pipe Beveler Beveler 2C-20 mathey #1

  • Bernardsville, New Jersey, United States
  • Jun 2nd
Vintage 1940s Magic Wand Welder Welding Box Patent Specialties Group Transformer

Vintage 1940s Magic Wand Welder Welding Box Patent Specialties Group Transformer

  • Orange, California, United States
  • Jun 2nd
H&M 14"-20" Pipe Beveler Beveler 2C-20 mathey #2

H&M 14"-20" Pipe Beveler Beveler 2C-20 mathey #2

  • Bernardsville, New Jersey, United States
  • Jun 2nd

People who viewed this item also vieved

Anchor sz 1-101-0 cutting tip

Anchor sz 1-101-0 cutting tip

  • Lewiston, California, United States
  • Jan 30th
25ft Oxygen/acetylene hose with spark arresters

25ft Oxygen/acetylene hose with spark arresters

  • Lewiston, California, United States
  • Jan 30th
VICTOR MTN-200C - pipe beveling torch

VICTOR MTN-200C - pipe beveling torch

  • Creswell, Oregon, United States
  • Jan 30th
True Circle-Cutter bar for Smith SC 209 torch.

True Circle-Cutter bar for Smith SC 209 torch.

  • Vernon, Alabama, United States
  • Jan 30th
CLEAR 2 X 4.25 SAFETY/COVER PLATE LENS- QTY 5

CLEAR 2 X 4.25 SAFETY/COVER PLATE LENS- QTY 5

  • Indianapolis, Indiana, United States
  • Jan 30th
Arcair K4000 Carbon Arc Gouging Rig + 2 Boxes of Rods

Arcair K4000 Carbon Arc Gouging Rig + 2 Boxes of Rods

  • Newport News, Virginia, United States
  • Jan 30th
ERICO CADWELD MOLD IPH rdh5426 2/0 CONC 6 REBAR 15 W/M W/GRAPHITE TUBES

ERICO CADWELD MOLD IPH rdh5426 2/0 CONC 6 REBAR 15 W/M W/GRAPHITE TUBES

  • Hudson, Florida, United States
  • Jan 30th
TWECO 2-WPC-P CABLE CONNECTORS (1 MALE and FEMALE) 1/0-3/0

TWECO 2-WPC-P CABLE CONNECTORS (1 MALE and FEMALE) 1/0-3/0

  • Henderson, Nevada, United States
  • Jan 30th
Thermacut Advanced Consumable Sheild Cap, Part #T-4609.

Thermacut Advanced Consumable Sheild Cap, Part #T-4609.

  • United States
  • Jan 30th
Thermacut Consumable, Part # T-0063, Nozzle 100 Amp Pkg Of 3

Thermacut Consumable, Part # T-0063, Nozzle 100 Amp Pkg Of 3

  • United States
  • Jan 30th
Thermacut T-0066 Welding Air Electode 5-pc

Thermacut T-0066 Welding Air Electode 5-pc

  • United States
  • Jan 30th
Plasma Cutting Castle Shield Cap 020335 Fits Hypertherm Max-100

Plasma Cutting Castle Shield Cap 020335 Fits Hypertherm Max-100

  • United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies