Accufast VL Labeler & Tabber, includes Table & Stand # 11-0400-49 Please note that this unit ships by LTL Truck. Please contact us for a shipping quote. This listing includes the VL, and Table Only. Please see other auctions or contact us for add ons. The VL is a multi purpose machine. Each unit may be set up to apply labels, stamps or tabs. It comes on a stand and may be rolled up to the end of an inserter, an address printer or a feeder. It features: Twin belt transport 12" diameter by 3" wide roll on a 3" core. Sliding, lockable head Thickness up to 1/4 inch Electronic controls to switch between single and double labeling You create a simple in line tabber by adding the TF tab folder to the output of the VL. In this application, the VL head is slid to the tabbing position, pieces are fed the long way and either 1 or 2 tabs are applied to the edge of the piece half on, half off. The TF tab folder accepts the output of the labeler, registers the material against an adjustable fence and folds the tab down tight to the edge of the piece. In order to complete the tabbing system, you need a feeder. We suggest using an ACCUFAST HDF as shown below. Depending on room, budget or inclination, you can also add a conveyor or an in line ink jet such as the PMX to the system to create a self mailer processing unit that starts with the folded piece, applies and folds the tab, prints the address and stacks it in order of mailing. If the piece is glossy, add a UV cure unit to the conveyor. VL System Technical Specifications [top] LABELER - Base 39” long x 24” wide x 44” high Weight: 139 lbs. Handles up to 1/2” thick and 12” x 15” material Speed: 183 ft/min. Power: 110/230 VAC 50/60 Hz 3/1.5 amps. Integrated feeder control LABELER - Head 13 1/8” long x 21” high x 10 7/8” wide Weight: 23 lbs. (no roll) Roll Capacity: 12” Roll ID: 3” Up to 25,000 1” labels/hour Fan fold or roll labels up to 4 1/2” wide. Ideal with 3M Post-it® Notes FEEDER - HDF Weight: 95 lbs. Speed: 1-250 ft/min. 12” stack 1/2” maximum thickness Do not hesitate to use the information below to contact us with any questions or concerns! We are very motivated to move these units! Mention EBAY for the best deal! 800-398-5283 / 714-238-1133 www.printfs.com |sales1@ordwaycorp.com espanol.printfs.com |espanol@ordwaycorp.com PFS Used Equipment eBay Store PFS Parts Equipment eBay Store http://stores.ebay.com/printfs-used http://stores.ebay.com/printfsparts/ (Call us if you have any questions) 800-398-5283 / 714-238-1133 Or Send us an eBay message I know you are going to Best Offer this one... Warranty: Limited Manufacturer Warranty please contact us for details. About Print & Finishing Solutions: For additional company information please call 800-398-5283 or 714-238-1133 or send us an eBay message. We are based out of Southern California and are in the Los Angeles time zone (GMT -8). Habla Espanol: Para obtener asistencia en espanol, por favor y contactenos por telefono o e-mail y solicite ayuda, "Habla Espanol." Si preferir por e-mail, por favor y comunicarse en espanol. Apoyo en espanol esta disponible en todos los aspectos de nuestro negocio, incluyendo las partes del equipo y las ventas suministro, de servicios de equipos y servicio al cliente. Para obtener asistencia en espanol, por favor y contactenos por telefono o e-mail y solicite ayuda, "Habla Espanol." Si preferir por e-mail, por favor y comunicarse en espanol. Apoyo en espanol esta disponible en todos los aspectos de nuestro negocio, incluyendo las partes del equipo y las ventas suministro, de servicios de equipos y servicio al cliente. eBay Listing Specifications: We make every effort to provide proper listing specifications but in many cases we rely on internet and manufacturer based information, which is always subject to change. At times when selling product that is not one of our core product lines or an older product, we may not have correct information and so purchasers must do their homework and know what they are buying. If the purchase justifies a personal or 3rd party visit, please do so. Shipping: If you require a firm freight quote to anyplace in the world, please make your request by sending us an eBay message. We prefer to provide freight quotes to serious buyers that are willing to provide us their e-mail and physical address. We will also need to know if you will be receiving the freight at a (1) commercial or residential address, and (2) in the case of larger machinery, if you have a dock or forklift for receiving the freight (do you require a ground level delivery with a lift-gate?). Generally residential and lift-gate deliveries cost additional. (3) If you are considering a used piece of machinery, please know that in most cases a crating / packaging fee will apply. We ship domestically and worldwide by UPS, UPS Freight, UPS Ocean, FedEx, most common LTL carriers, and though special arrangement with private trucks. We are also very happy to ship with the carrier of your choice. If there is a safe and economical way to get the freight to you, we are happy to work with your source. California Sales Tax: Sales tax will be added to California sales based on destination county and city. Note: PFS Reserves the right to refuse sale to any buyers with excessive negative feedback left for sellers (800) 398-5283 Graphic-Arts Bindery and Finishing Machinery for the 21st Century Phone: (800) 398-5283 (714) 238-1133 Fax: (714) 238-1147 Please contact us today! We would be happy to answer your questions and concerns about a wide range of products. We offer: New, used, and refurbished machines Retail, wholesale, corporate, and government pricing Parts and supplies International service, installation, and warranty support Same-day shipments As your business partner, the success of Print & Finishing Solutions relies on the success of our customers and vendors. This philosophy is reflected in our motto, “Taking care of your business is our specialty.” Our team approach promotes an atmosphere of cooperation, and our primary goal is to work together for success. It is the goal of PFS to support our customers and their print-related machinery for the long term with intelligent, well-trained sales and service personnel. We have a complete line of presses and finishing equipment, including paper cutters, folders, drills, binders, collators, bookletmakers, cornerounders, hole punches, tabbers, joggers, punch and bind equipment, shrink wrap and packaging systems, staplers, stitchers, stock carts, padders, trimmers, perf / score / slit / number systems, and used machinery. Consumer Confidence As part of our on-going goal to provide the highest level of customer satisfaction, Print & Finishing Solutions is a proud member of both the local chapter of the Better Business Bureau and the BBBOnline program, dedicated to promoting trust and confidence on the Internet. Through the online program, customers can access the current BBB database to view the complaint history of businesses and check that a business has met all of the stringent BBB membership standards. NOTE: All of our items are processed same day by PFS. Many items are drop shipped direct from the manufacturer. If you are worried about a lead time please ask us beforehand, and we will inform you of any backorders or additional manufacturing time.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
