Adafruit Feather M4 Express - Atsamd51 Cortex

US $26.39

  • Swanton, Vermont, United States
  • Aug 30th
Description Adafruit Feather M4 Express - ATSAMD51 Cortex Comes pre-loaded with the UF2 bootloader Built-in crypto engines with AES Fully assembled and tested, with UF2 USB bootloader No special tools or drivers needed Please note: Lipoly battery and USB cable not included The Adafruit Feather M4 Express - ATSAMD51 Cortex is a fast and strong development board. This feather is powered by the new chip ATSAMD51J19 - with its 120MHz Cortex M4 with floating point support and 512KB Flash and 192KB RAM. Your code will zig and zag and zoom, and with a bunch of extra peripherals for support, this will for sure be your favorite new chipset. And best of all, it's a Feather - so you know it will work with all FeatherWings! What a great way to quickly get up and running. The most exciting part of the Feather M4 is that while you can use it with the Arduino IDE - and it's bonkers fast when you do, it is shipped with CircuitPython on board. When you plug it in, it will show up as a very small disk drive with main.py on it. Edit main.py with your favorite text editor to build your project using Python, the most popular programming language. No installs, IDE or compiler needed, so you can use it on any computer, even ChromeBooks or computers you can't install software on. When you're done, unplug the Feather and your code will go with you. The Feather M4 Express uses the extra space left over to add a Mini NeoPixel, 2 MB SPI Flash storage and a little prototyping space. You can use the SPI Flash storage like a very tiny hard drive. When used in CircuitPython, the 2 MB flash acts as storage for all your scripts, libraries and files. When used in Arduino, you can read/write files to it, like a little datalogger or SD card, and then with our helper program, access the files over USB. Easy reprogramming: the Feather M4 comes pre-loaded with the UF2 bootloader, which looks like a USB storage key. Simply drag firmware on to program, no special tools or drivers needed! It can be used to load up CircuitPython or Arduino IDE (it is bossa-compatible). Comes fully assembled and tested, with the UF2 USB bootloader. It also comes with some headers so you can solder it in and plug into a solderless breadboard. Specifications Voltage: 3.3 V Peak Current Output: 500 mA USB native support: Yes USB bootloader, Serial Port debugging: Yes Crypto engines with AES (256 bit): Yes PWM: Yes GPIO: Yes I2S Input and Output RAM: 192 KB SPI Flash Storage: 2 MB EEPROM: No Lipoly Charger: 100 mA Mounting Holes: 4 Reset button: Yes Weight: 4.8 g What's Included 1 x Adafruit Feather M4 Express - ATSAMD51 Cortex Dimensions Size 50.8 x 22.8 x 7 mm / 2 x 0.9 x 0.3 inch Multimedia
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such s an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Adafruit Industries
Type Adafruit Industries
MPN 3857
UPC Does not apply

Directions

Similar products from Development Boards & Programmers

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies