+ Post new Ad
Adapa Panel Handler 4' Capacity Model HF-500 Hydraulic foot operated, US $3200 – Picture 0
Adapa Panel Handler 4' Capacity Model HF-500 Hydraulic foot operated, US $3200 – Picture 0

Adapa Panel Handler 4' Capacity Model Hf-500 Hydraulic Foot Operated

US $3200

  • Joplin, Missouri, United States
  • May 29th
Open on mobile:
QR code
I have for sale a nice Adapa Panel Handler.   This is meant to store flat or tilt 4' x 8' sheet goods.   Cylinder was just repaired and there are no leaks and it works as good as new.   Please call 417-781-1222 for questions.   We will load this for no charge onto your truck.   New price is $1150.  I have priced it less than half.   Here are some specs: TIRED OF WRESTLING PANELS ONTO THE SAW, OR WAITING FOR A CO-WORKER TO COME AND HELP YOU? A PANEL HANDLER in your shop will quickly pay for itself in safety, time saved, and by eliminating the need for an extra person to help do a job that one person can do with the right equipment. The PANEL HANDLER makes unloading a truck or feeding a saw a safe, one-person job. It can also do the job of a forklift and scissor table for a fraction of the cost, and it can navigate narrow passages. One worker can transport 10 panels and rotate the full load to vertical or horizontal. The load can be raised or lowered via a foot actuated hydraulic jack, so the top panel can be kept continually at the right height to slide onto your table saw. Load capacity: 1,000 lbs Floor lock holds cart steady during infeed and outfeed  Carriage locks at vertical and horizontal  Carriage height when horizontal: 27" - 35"  Carriage height when vertical: 10" - 18" Foot actuated hydraulic jack: 8" lift SPECIFICATIONS  4' PANEL HANDLER Weight: 180 lbs. L 48", W 30", H 50" Designed for 4' wide panels

Directions

Similar products from Other Woodworking Equipment & Machines

Modified Sulzer regulator - mini version - fully assembled and tested

Modified Sulzer regulator - mini version - fully assembled and tested

  • Plovdiv, default, Bulgaria
  • May 30th
DELTA 20-622 4" Quick Release Drill Press Vise

DELTA 20-622 4" Quick Release Drill Press Vise

  • Byron, Georgia, United States
  • May 30th
Shop Cart Panel Handler, used for Sheet Good Transport, Feeding and Storage

Shop Cart Panel Handler, used for Sheet Good Transport, Feeding and Storage

  • Sonoita, Arizona, United States
  • May 30th
Grizzly 20 Inch Planer 3 Hp 240 Volt Single Phase

Grizzly 20 Inch Planer 3 Hp 240 Volt Single Phase

  • Caryville, Tennessee, United States
  • May 30th
KREG POCKET HOLE JIG + SELF TAPPING POCKET SCREW KIT, SK03

KREG POCKET HOLE JIG + SELF TAPPING POCKET SCREW KIT, SK03

  • Bristol, Rhode Island, United States
  • May 30th
Gannomat Model 260 Case Clamp 220V 3PH

Gannomat Model 260 Case Clamp 220V 3PH

  • Abbotsford, British Columbia, Canada
  • May 30th
Rockwell Craftsman 43-110 Wood Shaper 220 Volt Motor Included w/ Stand

Rockwell Craftsman 43-110 Wood Shaper 220 Volt Motor Included w/ Stand

  • Carlisle, Pennsylvania, United States
  • May 30th
Woodworking Vacuum Table Veneer Press Vacuum Forming

Woodworking Vacuum Table Veneer Press Vacuum Forming

  • Piedmont, South Carolina, United States
  • May 30th
(9) RARE Vintage ROCKFORD ILLINOIS Ekstrom Carlson ROUTER LATHE 24 x 20 POSTERS

(9) RARE Vintage ROCKFORD ILLINOIS Ekstrom Carlson ROUTER LATHE 24 x 20 POSTERS

  • Loves Park, Illinois, United States
  • May 30th
WOOD WORKING TABLE LAYOUT LAY OUT BENCH Adjustable Legs 44 & 1/4"x 74" & 1/2"

WOOD WORKING TABLE LAYOUT LAY OUT BENCH Adjustable Legs 44 & 1/4"x 74" & 1/2"

  • Newport, Washington, United States
  • May 30th
Homag KF 20/20/QA/30 Double Sided Tenoner Edgebander Line with Infeed Conveyor

Homag KF 20/20/QA/30 Double Sided Tenoner Edgebander Line with Infeed Conveyor

  • Higginsville, Missouri, United States
  • May 29th
Homag KL 73 A3 Edgebander with Ligmatech ZHR 01 Automatic Return Conveyor

Homag KL 73 A3 Edgebander with Ligmatech ZHR 01 Automatic Return Conveyor

  • Higginsville, Missouri, United States
  • May 29th
Homag VFL-75 Postformer Post Former

Homag VFL-75 Postformer Post Former

  • Higginsville, Missouri, United States
  • May 29th
DEWALT COMPACT STAPLER DWHTTR130LH **NEW OTHER**

DEWALT COMPACT STAPLER DWHTTR130LH **NEW OTHER**

  • Greenwood, Indiana, United States
  • May 29th
MGM Transformer 30KVA w/Disconnect (Woodworking Machinery)

MGM Transformer 30KVA w/Disconnect (Woodworking Machinery)

  • Placentia, California, United States
  • May 29th
2006 Fuji Ring Vacuum/Blower w/Control Valves (Woodworking Machinery)

2006 Fuji Ring Vacuum/Blower w/Control Valves (Woodworking Machinery)

  • Placentia, California, United States
  • May 29th
Rockwell Heavy Duty Shaper

Rockwell Heavy Duty Shaper

  • Nacogdoches, Texas, United States
  • May 29th
MGM 3-Phase 480V 75KVA Transformer (Woodworking Machinery)

MGM 3-Phase 480V 75KVA Transformer (Woodworking Machinery)

  • Placentia, California, United States
  • May 29th
2006 Eaton Cutler-Hammer 75KVA Transformer (Woodworking Machinery)

2006 Eaton Cutler-Hammer 75KVA Transformer (Woodworking Machinery)

  • Placentia, California, United States
  • May 29th
Denray DownDraft Table - Model 3660 (Woodworking Machinery)

Denray DownDraft Table - Model 3660 (Woodworking Machinery)

  • Placentia, California, United States
  • May 29th

People who viewed this item also vieved

Delta Unisaw 10" Tilting Arbor Saw (#12)

Delta Unisaw 10" Tilting Arbor Saw (#12)

  • San Fernando, California, United States
  • Jan 30th
Oliver Model 4680 Horizontal Band Resaw

Oliver Model 4680 Horizontal Band Resaw

  • United States
  • Jan 30th
Delta Deluxe Radial Arm Saw with Automatic Brake, Model 10 (#1)

Delta Deluxe Radial Arm Saw with Automatic Brake, Model 10 (#1)

  • San Fernando, California, United States
  • Jan 30th
artcam 3d STL Model for CNC Router Machine Aspire Cross Relief Artcam celtic

artcam 3d STL Model for CNC Router Machine Aspire Cross Relief Artcam celtic

  • Durlesti, Chisinau, Moldova
  • Mar 2nd
artcam 3d STL Model for CNC Router Machine Aspire Cross Relief Artcam 134

artcam 3d STL Model for CNC Router Machine Aspire Cross Relief Artcam 134

  • Durlesti, Chisinau, Moldova
  • Mar 2nd
artcam 3d STL Model for CNC Router Machine Aspire Cross Relief Artcam 49

artcam 3d STL Model for CNC Router Machine Aspire Cross Relief Artcam 49

  • Durlesti, Chisinau, Moldova
  • Mar 2nd
Ritter R700 2HP 4"x 60" Double Edge Sanding Belt Sander Edger Machine Door Tilt

Ritter R700 2HP 4"x 60" Double Edge Sanding Belt Sander Edger Machine Door Tilt

  • Colorado Springs, Colorado, United States
  • Mar 3rd
Porter Cable 362V 4" x 24" Variable Speed Belt Sander

Porter Cable 362V 4" x 24" Variable Speed Belt Sander

  • Madison, Tennessee, United States
  • Mar 3rd
Skil Model 325 JY 525 Belt Sander 2.25" Sander Belts 6 7802 2 1/2 Grit NOS

Skil Model 325 JY 525 Belt Sander 2.25" Sander Belts 6 7802 2 1/2 Grit NOS

  • Ballwin, Missouri, United States
  • Mar 4th
Dumore Model 37-021 High Speed Drill Press

Dumore Model 37-021 High Speed Drill Press

  • Chicago, Illinois, United States
  • May 2nd
Powermatic Drill Press Return Spring 18209 MPN 6813026 FITS 1150 &1200

Powermatic Drill Press Return Spring 18209 MPN 6813026 FITS 1150 &1200

  • Louisville, Kentucky, United States
  • May 3rd
Craftsman 15" Drill Press, NO RESERVE, Meridian Airport Authority

Craftsman 15" Drill Press, NO RESERVE, Meridian Airport Authority

  • Meridian, Mississippi, United States
  • May 3rd
Centauro T4 Hydraulic Copy Lathe Operating & Parts Manual - VERY RARE!!!!!

Centauro T4 Hydraulic Copy Lathe Operating & Parts Manual - VERY RARE!!!!!

  • Elmira, Ontario, Canada
  • May 24th
Craftsman Wood Lathe 9x36 w/ STAND & MOTOR • • • NICE VINTAGE PROFESSIONAL TOOL

Craftsman Wood Lathe 9x36 w/ STAND & MOTOR • • • NICE VINTAGE PROFESSIONAL TOOL

  • Chicago, Illinois, United States
  • May 24th
33 1/2" Wood Lathe Drill Bit with 2 Mt Taper

33 1/2" Wood Lathe Drill Bit with 2 Mt Taper

  • Woodstock, New York, United States
  • May 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies