+ Post new Ad
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 0
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 1
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 2
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 3
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 4
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 5
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 6
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 7
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 8
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 9
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 0
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 1
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 2
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 3
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 4
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 5
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 6
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 7
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 8
Adjustable Hold Down Block Clamps 27 Pieces, US $430 – Picture 9

Adjustable Hold Down Block Clamps 27 Pieces

US $430

  • South Lyon, Michigan, United States
  • Jun 9th
Open on mobile:
QR code
27 Pieces Adjustable Hold Down Block Clamps 

Directions

Similar products from Supporting Blocks & Sets

MACHINIST TOOLS LATHE MILL Machinist Lot of Machined Parallel Blocks for Set Up

MACHINIST TOOLS LATHE MILL Machinist Lot of Machined Parallel Blocks for Set Up

  • Morris Plains, New Jersey, United States
  • Jun 9th
V Block, Machinist V Block Made by Toolmaker 2 bs 10 oz 2.5 in L x 2 H x 2.75 W

V Block, Machinist V Block Made by Toolmaker 2 bs 10 oz 2.5 in L x 2 H x 2.75 W

  • Gilbert, Arizona, United States
  • Jun 9th
V Block, Machinist V Block, Made by Starrett #278, 1.5 in L x 1.25 H x 1.25W

V Block, Machinist V Block, Made by Starrett #278, 1.5 in L x 1.25 H x 1.25W

  • Gilbert, Arizona, United States
  • Jun 9th
V Block, Machinist V Block, Made by Starrett #278, 1.5 in L x 1.25 H x 1.25W n

V Block, Machinist V Block, Made by Starrett #278, 1.5 in L x 1.25 H x 1.25W n

  • Gilbert, Arizona, United States
  • Jun 9th
V Block, Machinist V Block, Made by Toolmaker, 4lbs 4 oz, 3 in L x 2.5 H x 2.5W

V Block, Machinist V Block, Made by Toolmaker, 4lbs 4 oz, 3 in L x 2.5 H x 2.5W

  • Gilbert, Arizona, United States
  • Jun 9th
Set of 6 Titan Tool Supply Magnetic 1" V-Blocks

Set of 6 Titan Tool Supply Magnetic 1" V-Blocks

  • Ogden, Utah, United States
  • Jun 9th
STARRETT Dial Test Indicator with Accessories - Model: 709ACZ Range: 0.060"

STARRETT Dial Test Indicator with Accessories - Model: 709ACZ Range: 0.060"

  • Flushing, New York, United States
  • Jun 9th
Suburban Tool 6" x 6" x 4" Hardened Steel Precision V-Block

Suburban Tool 6" x 6" x 4" Hardened Steel Precision V-Block

  • Venice, Florida, United States
  • Jun 9th
Lufkin Pair Lufkin 6" Hold Downs Wedges 902E In Original Box Excellent Condition

Lufkin Pair Lufkin 6" Hold Downs Wedges 902E In Original Box Excellent Condition

  • Hollidaysburg, Pennsylvania, United States
  • Jun 9th
Aluminum V Block 1 1/4" x 2" x 6"

Aluminum V Block 1 1/4" x 2" x 6"

  • Kokomo, Indiana, United States
  • Jun 9th
General 6-Piece Adjustable Parallel Block Set 3/8" - 2-1/4" S-112-6 USG

General 6-Piece Adjustable Parallel Block Set 3/8" - 2-1/4" S-112-6 USG

  • Roanoke, Virginia, United States
  • Jun 9th
Clamp Set, 2 Clamps (V-Blocks not included) plus 2 Vice Clamps #4481

Clamp Set, 2 Clamps (V-Blocks not included) plus 2 Vice Clamps #4481

  • Lake Forest, California, United States
  • Jun 9th
SUP-R-DIE PARALLEL BLOCK SET - 6" BY 2 1/2" BY 1"

SUP-R-DIE PARALLEL BLOCK SET - 6" BY 2 1/2" BY 1"

  • Newbury, Ohio, United States
  • Jun 9th
machinist tools,brown & sharpe vee blocks and 2-4-6 blocks

machinist tools,brown & sharpe vee blocks and 2-4-6 blocks

  • Bennington, New Hampshire, United States
  • Jun 9th
Starett V Blocks And Clamps

Starett V Blocks And Clamps

  • Rensselaer, Indiana, United States
  • Jun 9th
Set of 2 large Toolmaker's V Blocks, HARDENED STEEL!

Set of 2 large Toolmaker's V Blocks, HARDENED STEEL!

  • Rancho Cucamonga, California, United States
  • Jun 9th
Magnetic V - Blocks

Magnetic V - Blocks

  • National Park, New Jersey, United States
  • Jun 9th
STEP BLOCKS,6 inch,machinist block,clamping block,tooling,milling,work holding

STEP BLOCKS,6 inch,machinist block,clamping block,tooling,milling,work holding

  • Reno, Nevada, United States
  • Jun 9th
SMALL 2" BENCH BLOCK machinist tools *7

SMALL 2" BENCH BLOCK machinist tools *7

  • Thomaston, Connecticut, United States
  • Jun 9th
BROWN & SHARPE MODEL NO. 745 V-BLOCK 1-1/8" V CAPACITY + BONUS LUFKIN

BROWN & SHARPE MODEL NO. 745 V-BLOCK 1-1/8" V CAPACITY + BONUS LUFKIN

  • Ellington, New York, United States
  • Jun 9th

People who viewed this item also vieved

LATHE DEAD CENTER 6" used

LATHE DEAD CENTER 6" used

  • Beltsville, Maryland, United States
  • Jan 30th
LATHE DEAD CENTER 6"

LATHE DEAD CENTER 6"

  • Beltsville, Maryland, United States
  • Jan 30th
LIVE CENTER-MT#5-NO NAME-

LIVE CENTER-MT#5-NO NAME-

  • Coeur d'Alene, Idaho, United States
  • Jan 30th
PAIR 1/4 inch TOOL STEEL lathe chuck keys for Atlas, South Bend others

PAIR 1/4 inch TOOL STEEL lathe chuck keys for Atlas, South Bend others

  • West Babylon, New York, United States
  • Jan 30th
Howa Hydraulic Chuck with WS Collet System and new set soft jaws

Howa Hydraulic Chuck with WS Collet System and new set soft jaws

  • Lockport, New York, United States
  • Jan 30th
Back Plate 8" Toolmex 7-873-085

Back Plate 8" Toolmex 7-873-085

  • Des Moines, Iowa, United States
  • Jan 30th
VICTAULIC 4-641 FLANGE UPC CLAMP 4 IN B247320

VICTAULIC 4-641 FLANGE UPC CLAMP 4 IN B247320

  • Buffalo, New York, United States
  • Jan 30th
R.E. Load Frame Pad - Royal Blue

R.E. Load Frame Pad - Royal Blue

  • Sheffield, Massachusetts, United States
  • Jan 30th
201A Horizontal Clamp Hand Tool High-carbon Steel Horizontal Toggle Clamp

201A Horizontal Clamp Hand Tool High-carbon Steel Horizontal Toggle Clamp

  • Shenzhen, China
  • Jan 30th
HARDINGE 5C INTERNAL THREADS COLLET 3/8

HARDINGE 5C INTERNAL THREADS COLLET 3/8

  • Norwood, Massachusetts, United States
  • Jan 30th
HARDINGE 5C NO ID THREADS COLLET 11/32 (REF #22)

HARDINGE 5C NO ID THREADS COLLET 11/32 (REF #22)

  • Norwood, Massachusetts, United States
  • Jan 30th
HARDINGE 5C NO ID THREADS COLLET 9/32 (REF #10)

HARDINGE 5C NO ID THREADS COLLET 9/32 (REF #10)

  • Norwood, Massachusetts, United States
  • Jan 30th
ALUMINUM FIXTURE OR DIE TABLES

ALUMINUM FIXTURE OR DIE TABLES

  • Livonia, Michigan, United States
  • Jan 30th
Machinist Knee, 2-3/4" x 2-53/64" x 3-23/32" with Tapped Holes by Toolmaker

Machinist Knee, 2-3/4" x 2-53/64" x 3-23/32" with Tapped Holes by Toolmaker

  • Saunderstown, Rhode Island, United States
  • Jan 30th
End Mill Holder Style Fixture M12-1.0 for UNIMAT SL DB -LatheCity

End Mill Holder Style Fixture M12-1.0 for UNIMAT SL DB -LatheCity

  • Fargo, North Dakota, United States
  • Jan 30th
Set of Magne Blox. V-blocks

Set of Magne Blox. V-blocks

  • Millstadt, Illinois, United States
  • Jan 30th
JERGENS SERRATED MASTER KEY (QTY 3) 1.5"W 2.44"L 113 015947 (LOC1236A) TS12

JERGENS SERRATED MASTER KEY (QTY 3) 1.5"W 2.44"L 113 015947 (LOC1236A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
SCHUNK REDUCTION SLEEVE SRE S 5/16 8 201973 88MM OD 6.3MM ID (LOC1236A) TS12

SCHUNK REDUCTION SLEEVE SRE S 5/16 8 201973 88MM OD 6.3MM ID (LOC1236A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
9D59 VISE, 2-3/4" X 1-7/8" JAW, 3" OPENING, YANKEE #1993, 360 SWING, NORTH BROS

9D59 VISE, 2-3/4" X 1-7/8" JAW, 3" OPENING, YANKEE #1993, 360 SWING, NORTH BROS

  • Clarkston, Michigan, United States
  • Jan 30th
4" Cross Drill Press Vise Slide Metal Milling 2 Way X-Y Clamp Machine Heavy Duty

4" Cross Drill Press Vise Slide Metal Milling 2 Way X-Y Clamp Machine Heavy Duty

  • Pomona, California, United States
  • Jan 30th
9D52 VISE, 4" WIDE & 3-1/2" OPENING, MADE IN TAIWAN, 9-1/2" X 6" X 2-1/2" CLOSED

9D52 VISE, 4" WIDE & 3-1/2" OPENING, MADE IN TAIWAN, 9-1/2" X 6" X 2-1/2" CLOSED

  • Clarkston, Michigan, United States
  • Jan 30th
YUASA Horizontal Vertical 8" precision rotary table 550-048 milling drilling 113

YUASA Horizontal Vertical 8" precision rotary table 550-048 milling drilling 113

  • Santa Ana, California, United States
  • Feb 24th
Burke 6" Dividing/Indexing head with tailstock

Burke 6" Dividing/Indexing head with tailstock

  • Woodbury, Connecticut, United States
  • Feb 24th
Haas S5C Indexer with Control

Haas S5C Indexer with Control

  • Denver, Colorado, United States
  • Feb 25th
Used NIKKEN Japan SK10 BT30 SK10-45 SLIMCHUCK COLLET CHUCK (O) (WR.8.B.A.15)

Used NIKKEN Japan SK10 BT30 SK10-45 SLIMCHUCK COLLET CHUCK (O) (WR.8.B.A.15)

  • Perth, Ontario, Canada
  • Mar 2nd
Used NIKKEN Japan SK10 BT30 SK10-45 SLIMCHUCK COLLET CHUCK (N) (WR.8.B.A.14)

Used NIKKEN Japan SK10 BT30 SK10-45 SLIMCHUCK COLLET CHUCK (N) (WR.8.B.A.14)

  • Perth, Ontario, Canada
  • Mar 2nd
Used NIKKEN Japan BT30 SK10 SK10-45 SLIMCHUCK COLLET CHUCK (P) (WR.8.B.A.16)

Used NIKKEN Japan BT30 SK10 SK10-45 SLIMCHUCK COLLET CHUCK (P) (WR.8.B.A.16)

  • Perth, Ontario, Canada
  • Mar 2nd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies