Aeroflex IFR 2026Q 10kHz -2.4GHz Signal Generator Condition: Good physical condition. Unit has error 503, 1506, 2506. The unit being sold as it, please see Term of Sale for more detail. Serial Number: 112282698 Unit Included: Unit installed option 3(high stability OCXO). As seen in the pictures. No accessories and manuals are associate with the unit Descriptions and features: 10kHz -2.4GHz Multisource CDMA Signal Generator The Aeroflex/IFR/Marconi 2026Q Multisource Signal Generator is designed to work with a radio test set to provide a fully integrated radio receiver test solution for cellular and PCS systems. The IFR 2026Q is a derivitive of the popular Marconi 2026 Signal Generator and is for use specifically with CDMA radio test sets. Features and specifications of the Aeroflex 2026Q Signal Generator include: Two tone interference generation for AMPS/CDMA receiver testing in accordance with IS-97-A/IS-98-A Option for providing GSM signals for receiver and amplifier testing Combiner output frequency range from 800 MHz to 2.0 GHz Provides single calibrated point of reference for the transceiver under test Excellent phase noise and spectral purity (low residual FM of typically 3 Hz and typical sideband noise of -121 dBc/Hz at 20 kHz offset from 1 GHz) The Marconi 2026Q is designed to produce a fully calibrated combined RF output containing any mix of internally generated interference signals from its two RF sources, together with a calibrated signal path for a radio test set transmit output. A return path from the transceiver back to the radio test set receiver input is also provided through the instrument. This allows a CDMA receiver to be tested for sensitivity in the presence of single or dual tone interference. The interfering signals are combined without the need for any RF switching mechanism that would otherwise affect the test result. Elimination of additional RF combining or signal conditioning High internal isolation of returned signals Includes two independent, fully featured RF signal generators 10 kHz to 2.4 GHz Very low levels of internally generated intermodulation products Single unit solution for CDMA interference testing The 2026Q is configured to ensure high levels of isolation between each of the transmit and receive paths between the radio test set, the interfering signal sources and the transceiver under test. Path loss test data is supplied with each instrument for the frequency bands 865 MHz - 895 MHz, 1750 MHz - 1990 MHz. Drift influences within these bands is minimal ensuring a level accuracy of better than 0.75 dB. The frequency response across each of these bands is flat to within 0.1 dB, thus minimizing the need for additional system calibration. Each of the two RF generators contained within 2026Q can be used independently, routed to their individual RF connectors. In this mode, each generator covers the full frequency range 10 kHz to 2.4 GHz with an output power of between -137 dBm and +24 dBm. Each source may be independently modulated either from an internal or external source(s). Modulation modes include AM, FM, PM, Pulse and 2/4 level FSK. The standard 2026 specification applies when used in this mode. Each of the signal sources can either be routed to a separate output connector or switched to the input of an RF combiner network before being fed to the combiner output connector. The combiner routing is set up quickly and effectively using the Combiner Set Up menu. The flexibility of the signal routing allows the 2026Q to accept an external input from another signal generator, such as the 2050 Digital and Vector Generator producing CDMA modulation or a radio test set. The two internal generators can have their frequency and level ‘coupled . In the case of RF level this coupling can be any fixed offset enabling control of a single parameter to manifest a change in both sources. For RF frequency this coupling can be both a fixed frequency offset or a harmonically related offset and again allow simple programming and control of the instrument. The Aeroflex 2026Q allows either of the independent RF sources to be frequency swept with user defined start, stop, and step values to reduce the amount of operator time or GPIB overhead. By enabling the coupling facility, sweeping one source will simultaneously sweep the other internal RF source to allow automated swept measurements on frequency conversion devices to be made. Each of the RF signal generators is able to deliver up to +24 dBm at their output, making them ideal for testing components such as mixers and amplifiers. Each signal source is capable of being independently modulated from its own fully programmable modulation source to ensure maximum flexibility. The internal modulation sources are each capable of generating sine, triangle or square wave signals. Amplitude, frequency and phase modulated carriers can be generated from the internal modulation sources or from the independent external inputs. The frequency modulation system provides excellent performance in the DC coupled mode with very low carrier frequency error and stability ensuring that the generator can accurately test receivers sensitive to small frequency errors. Payment may be made via paypal and and our Merchant Account, all major credit cards including Visa, Master Cards, Discover and American Express. To pay your Credit Card through our SSL Secured Intuit Quickbooks Merchant Account:Free Insurance if paying through our SSL Secured Merchant Account. Other payment methods also accepted. Please email us for more information. Insurance: Free Insurance if paying Visa/MCard through our SSL Secured Merchant Account. Shipping & Delivery: Vietronix ships merchandise to locations within the United States and U.S. territories, including Alaska, Hawaii, Puerto Rico, Guam, and the US Virgin Islands. The risk of loss and title for all merchandise ordered on this web site pass to you when the merchandise is delivered to the shipping carrier. International: Customs and import duties may be applied to International orders when the shipment reaches its destination. Such charges are the responsibility of the recipient of your order and vary from country to country. Contact your local customs office for details. Shipping laws are different in each country. It is your responsibility to check with your Customs office to verify whether the country to which you are shipping permits the shipment of your products. Vietronix is not responsible for any direct, indirect, punitive, or consequential damages that arise from improper international shipping practices. Sold As Is! : Merchandises are not warranted to manufacturers specification. They need to be repaired and/or calibration. No return will be accepted. 30 Days Warranty: Merchandises are 7 days right of return and 30 days warranty unless specified in description. Merchandises are fully tested by Vietronix's technicians but limited to calibration and reconditioned. Calibration and reconditioned are subjected 90 days warranty, but sold separately. Merchandises are warranted 30 days in working condition. The warranty is limited to repair, replacement of parts or products in the determination of Vietronix. Refund or credit will be given if we can not repair or replacement of products. 90 Days Warranty: All reconditioned and calibrated merchandises are subjected 7 days right of return and 90 days warranted. Merchandises those are reconditioned calibrated and certified by Vietronix. Recondition and calibration are purchased separately. Extended warranties may be purchased for the most reconditioned and calibrated products. Purchases of reconditioned test equipment are warranted to be in good working order for the period covered. This warranty is limited to repair or replacement of parts or equipment in the determination of Vietronix. Remove tamper tags will avoid your warranty. All return products will not be accepted if the tamper tags are removed, broken or tampered. We stand behind our products and if you feel necessary to remove our tags, please be sure to test the products first.All CD-ROM, Software and Manuals are subject sold as is. No refund by any mean. All shipping and handling cost are subjected non-refundable. About Us Founded in 2001, Vietronix offers premium test and measurement equipment solutions to thousand of customers from private to corporations worldwide. Our specialize services include buy, sale, trade as well as maintenance, nd calibration services. Vietronix business headquarter is located in the heart of Silicon Valley, San Jose California. We are committed to excellent, quality, trust and confidence services. Vietronix Account Executives are specialists in electronic test equipments who can help customers decide on what specific model or product will best meet their needs. We are providing a high degree of customer assistance contributes significantly to generating long lasting customer relationships, repeat purchases and referrals. Our Services Used Test Equipments: Vietronix sells the highest grade of used test equipments. These test equipments include Oscilloscopes, logic analyzers, spectrum analyzers, network analyzers, RF and microwave, telecommunications equipments, meters, power supplies, signal sources, , frequency counters and many more. Vietronix years of experience Technicians and engineers thoroughly repair, test and calibrate the equipments with NIST traceability. The equipments are calibrated to manufacturer's specifications as well as ISO/IEC 17025 and ANSI/NCSL Z540-1 standards. Our lab is A2LA Accredited. The equipments are cosmetically refurbished which may include painting and replacing any external components. The manuals and the complete list of accessories are included with some of the units. All vietronix equipments come with a 90 days warranty. The end result is equipments that look and function like new at a fraction of the cost. Buy and Trade: Vietronix also purchases and trade-in used excess equipments for top dollars. This provides you with a fast and convenient way to convert their excess equipments into cash or new equipments. Your company can receive payment directly, obtain a credit to apply to future purchases, or immediately apply their trade-in amounts toward another purchase. Our office is located at:3146 Millbrook Dr. San Jose Ca 95148Office hours:Mon - Fri 4:00pm - 10:00pm PST Sat - Sun 9:00am - 9:00pm PST Contacts:408-238-8359408-646-6652US and Canada Toll Free: 1-888-336-1976www.vietronix.comEmail: vietronix@vietronix.com
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
