Aerospace High Temperature Silicone Rubber Fiberglass Reinforced Sheet 050x9x12, US $19.95 – Picture 0

Aerospace High Temperature Silicone Rubber Fiberglass Reinforced Sheet 050x9x12, US $19.95 – Picture 1

Aerospace High Temperature Silicone Rubber Fiberglass Reinforced Sheet 050x9x12, US $19.95 – Picture 2

Aerospace High Temperature Silicone Rubber Fiberglass Reinforced Sheet 050x9x12, US $19.95 – Picture 3

Aerospace High Temperature Silicone Rubber Fiberglass Reinforced Sheet 050x9x12, US $19.95 – Picture 4

Aerospace High Temperature Silicone Rubber Fiberglass Reinforced Sheet 050x9x12

US $19.95

Yuma, Arizona, United States
Jan 30th

Open on mobile:
QR code

One (1) Aerospace High Temperature Silicone Rubber Fiberglass Reinforced Sheet .050”x9”x12” Aerospace Grade High Temperature Silicone Rubber Fiberglass Reinforced Sheet 0.050 inches Thick, 9” x 12” This sheet material was originally used as caul plate material in Aerospace Composites Manufacture where high temperature and pressure are used and excellent release properties are needed. It is constructed with 3 plys of Style 1523 fiberglass fabric coated with a flame retardant red silicone rubber. It is IDEAL for High Temperature applications. It can be used for gaskets or seals requiring a resilient, non-porous high-temperature, flame-retardant silicone suitable for operating temperatures from -100 to 500°F. It resists deterioration due to weathering and will remain flexible over its temperature range. Three (3) Style 1523 fiberglass fabric plys are centered between 4 layers of silicone that gives the material great dimensional stability and tensile strength. I cut an edge of a small piece of the material on an angle to show the 3 plys of fiberglass and included a photograph for you to see. While I cannot say this material is “Food Grade Silicone” I would not hesitate to use a sheet of this material to bake cookies in my oven. No worries about fiberglass entering the food since both sides are coated in silicone. PLEASE NOTE: I have this material in roll form that is 50 inches wide (48 inches wide nominal without selvage). Please ask about purchasing other sizes for your projects and needs. Also, I can ship several 9” x 12” sheets of this material in the same flat rate envelope to save on shipping. You will NOT receive selvage in 9”x12” sheets. MATERIAL SPECIFICATIONS Manufacturer: Fabri Cote, Los Angeles, CA Reinforcement: 3 Ply Style 1523 Fiberglass (see photograph of edge) Thickness: 0.050 inch (50 mils) Weight: 60 oz/Sq Yd Working Temperature Range: -100 deg F to +500 deg F Hardness, Shore A Durometer: 70 Color: Red Surface Finish: Fabric Texture (see close up photograph of surface) APPLICATIONS Excellent for Gasketing and Seal Material Applications requiring higher dimensional stability and tensile strength Applications that require a high degree of “release” or “non-stick” High Temperature applications FEATURES Extreme High & Low Temperature Resistance Ozone resistance Excellent Release Properties Good compression set characteristics Radiation resistance Dimensional stability