Afinia Premium Pla Filament Blue, 1.75mm, 700g:

US $29.99

Dayton, Ohio, United States
Jan 30th

Open on mobile:
QR code

Afinia Premium PLA Filament Blue, 1.75mm, 700g: The filament specification is 1.75 millimeters. The filament spool is easily fed by the extruder head. The filament is extruded at 260 Celsius to .15mm onto a heated platform. *Afinia-supplied filaments have been tested to conform with the Afinia 3D printers specifications and work best for most applications. Although other filaments may be used, it is not recommended, as some filaments work poorly or can cause damage to the extruder head and machine. Afinia offers an array of plastic filament colors. Visit the Afinia store to see the full range of colors. The differences between the Premium and Value-Line filament: *The Premium filament has been designed specifically to the specifications of the H-Series 3D printer, the most important being the 260 degree Celsius extrusion temperature. The Value-Line filament has an extrusion temperature range between 210 and 250 degrees Celsius. This range allows for broad support among a number of different 3D printers on the market. *The lower extrusion temperature on the Value-line filament causes the raft and support material to adhere a bit harder to the model making it slightly more difficult to remove as compared to the Premium filament, but nothing too noticeable. The matched extrusion temperature on the Premium filament and H479 also has the added benefit of slightly higher tolerance control on the dimensions of the model. Both filaments work well, but the Premium works the best. *The Premium filament comes in a vacuum-packed foil bag with a desiccant pack to keep the ABS dry during storage. The Value-Line comes in a clear plastic bag with a desiccant pack. Although it is sealed, it is not vacuum-packed. *Odor is about the same for both filaments and isn't terribly noticeable unless you have it running in a small, unventilated room. *The Premium comes in 6 different colors and the Value-Line comes in 19 colors. The same colors between the Premium and Value-Line do vary, but both are colorfast. Specs Filament Diameter 1.75 mm Shipping Weight 1.36 kg (3 lb) Net Weight 1 kg (2.2 lb) Compatibility Afinia H479, H480, Other 3D Printers Requiring 1.75mm ABS Open Spool Filament PLA Characteristics: • Bio Based Material • Bio Degradable at the end of life • Environment-friendly • Excellent part quality, surface finish and resolution • Excellent dimensional stabiity • High stiffness • Good barrier properties • Ease of printing

Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...

Brand

Afinia PLA Premium Filament