Agilent Hp 4352s 10mhz - 12.6ghz Vco/pll Signal Analyzer - (4352b-001 + 43521a)

US $5100

Culver City, California, United States
Jun 5th

Open on mobile:
QR code

Powered by Frooition Pro Shop Search We buy, sell, rent and lease general purpose, optical and RF test and measurement equipment. We pay top dollar for your unwanted, surplus or defective gear. Let us make you an offer on your new or used Agilent, Tektronix, Anritsu, Fluke, Rohde & Schwarz and IFR instruments. Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices. Agilent HP 4352S 10MHz - 12.6GHz VCO/PLL Signal Analyzer - (4352B-001 + 43521A) Click here to view full size. Full Size Image Click to close full size. Item Description Agilent 4352S 10 MHz - 12.6 GHz Signal Test System - (4352B-001 + 43521A) - CALIBRATED! You are bidding on a Agilent 4352S 10 MHz - 12.6 GHz Signal Test System consisting of an Agilent 4352B with option 001 (Expand DC control voltage to -15 to 35 V) and an Agilent 43521A Downconverter Unit. The system was just calibrated in January of 2013 and includes the certificate of calibration as well as the 15 pin male to male rear cable and 4 front panel interconnect cables (not shown in pictures). The Agilent 4352S test system can evaluate the characteristics of VCOs and PLLs that are essential to designing local oscillators used in RF wireless communication equipment. This system can make high-speed measurements thanks to the dedicated firmware and "carrier lock multi-mode PLL" technology for phase noise measurement that enables the system lock unto the carrier of the measured signal automatically. In addition, the Agilent 4352B has excellent phase noise performance such as -157 dBc/Hz at 1 MHz offset typically, so that this test system can make reliable and repeatable phase noise measurement with up to 10 times reduction in measurement time. Actually it can measure 801 measurement points from 100 Hz to 10 MHz offset in 7.4 seconds/sweep. Besides the powerful phase noise measurement capability, the Agilent 4352S can measure frequency transient with 50 Hz frequency resolution and 12.5 micro-seconds time resolution. When configured with the Agilent 43521A downconverter unit, the Agilent 4352S offers a dedicated and comprehensive VCO/PLL design and production measurement solution for manufacturers that must test at frequencies over 3 GHz. The enhanced 4352S is a complete system that offers a frequency range from 10MHz to 12.6GHz and is capable of measuring phase noise, RF power, transients, settling time, and many more parameters required for VCO/PLL evaluations. This system can make high-speed measurements thanks to the dedicated firmware and "carrier lock multi-mode PLL" technology for phase noise measurement that enables the system lock unto the carrier of the measured signal automatically. In addition, the Agilent 4352B has excellent phase noise performance such as -157 dBc/Hz at 1 MHz offset typically, so that this test system can make reliable and repeatable phase noise measurement with up to 10 times reduction in measurement time. Actually it can measure 801 measurement points from 100 Hz to 10 MHz offset in 7.4 seconds/sweep. Besides the powerful phase noise measurement capability, the Agilent 4352S can measure frequency transient with 50 Hz frequency resolution and 12.5 micro-seconds time resolution. When the Agilent 71707A Microwave Downconverter is added to the standard system, the phase noise measurement can be performed up to 26.5GHz. The Agilent 4352S improves your VCO and PLL evaluation efficiency and testing productivity dramatically. Features: Outstanding phase noise measurement capability High resolution frequency transient measurement Automatic measurement capability and powerful analysis functions Simple configuration and multifunctional system VCO tuning characteristics evaluation You can view the performance specifications for this instrument here: Data Sheet This unit is in brand new, has been fully tested and is guaranteed functional. It will also come with a fresh ANSI Z540 calibration performed in May 2012 and a 5 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included. Insurance is included in UPS shipping charges. I cannot ship internationally. I will accept payment for this item by company check, cashiers check and wire transfer only. Feel free to send any questions regarding this item to: brannonsb@aol.com (in fact I encourage you to do so) If you have zero feedback, please email me before you bid to let me know that you are serious, otherwise I may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed. Please note that shipping and insurance costs are non-refundable. I'm always very happy to leave appropriate feedback (hopefully very positive). Make sure that you check out my other auctions for great deals on other test and measurement equipment. Thank you and good luck bidding.