+ Post new Ad
Air Bearing, Professional Instrument., US $2,995.00 – Picture 0
Air Bearing, Professional Instrument., US $2,995.00 – Picture 1
Air Bearing, Professional Instrument., US $2,995.00 – Picture 2
Air Bearing, Professional Instrument., US $2,995.00 – Picture 3
Air Bearing, Professional Instrument., US $2,995.00 – Picture 4
Air Bearing, Professional Instrument., US $2,995.00 – Picture 5
Air Bearing, Professional Instrument., US $2,995.00 – Picture 6
Air Bearing, Professional Instrument., US $2,995.00 – Picture 7
Air Bearing, Professional Instrument., US $2,995.00 – Picture 8
Air Bearing, Professional Instrument., US $2,995.00 – Picture 9
Air Bearing, Professional Instrument., US $2,995.00 – Picture 10
Air Bearing, Professional Instrument., US $2,995.00 – Picture 0
Air Bearing, Professional Instrument., US $2,995.00 – Picture 1
Air Bearing, Professional Instrument., US $2,995.00 – Picture 2
Air Bearing, Professional Instrument., US $2,995.00 – Picture 3
Air Bearing, Professional Instrument., US $2,995.00 – Picture 4
Air Bearing, Professional Instrument., US $2,995.00 – Picture 5
Air Bearing, Professional Instrument., US $2,995.00 – Picture 6
Air Bearing, Professional Instrument., US $2,995.00 – Picture 7
Air Bearing, Professional Instrument., US $2,995.00 – Picture 8
Air Bearing, Professional Instrument., US $2,995.00 – Picture 9
Air Bearing, Professional Instrument., US $2,995.00 – Picture 10

Air Bearing, Professional Instrument.

US $2,995.00

  • Kent, Washington, United States
  • Jan 30th
Open on mobile:
QR code
Two (2) Professional Instrument # 50 Taper Air Bearings offered.  Included is the base, the air bearing and valve assembly and draw bar.  One unit has an index ring mounted to the front of the bearing the other does not.  These are offered at $2995.00 each.  Please contact me for shipping.  Shipping weight will be about 80 to 100 pounds. The 2" End Mill and the # 50 Taper End Mill holder are not included. ( #50 Taper end mill holders come in sizes from  3/8" up to 2-1/2" shank capacity.)  We have three of these air bearings.  The only bearing that has any manufacturers information on it is the one we have on one of our grinders.  I'm thinking the one with the information is the oldest bearing.  There are no markings on the other two but, there is a shinny area where there appears to have been a placard on one.  Let me know which one of the three you would like.  We will be keeping one for our own use.  Any of the other two are for sale.  They all work equally well.  Thanks.  
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Professional Instrument
Country of Manufacture United States
Model #50 Taper

Directions

Similar products from Toold for Grinding Machines

Burr King Model 760 Belt Sander Grinder 2" x 60" w/ Pedestal 1.5HP 115 volts

Burr King Model 760 Belt Sander Grinder 2" x 60" w/ Pedestal 1.5HP 115 volts

  • Pontiac, Michigan, United States
  • Jan 30th
New Royal Master Grinders 12 x 4 x 5 Grinding Wheel WW-791

New Royal Master Grinders 12 x 4 x 5 Grinding Wheel WW-791

  • Salt Lake City, Utah, United States
  • Jan 30th
Trumpf Quicksharp Die & Punch Grinder

Trumpf Quicksharp Die & Punch Grinder

  • Lake Saint Louis, Missouri, United States
  • Jan 30th
BALDOR 6" DIAMOND WHEEL TOOL GRINDER CAT #532

BALDOR 6" DIAMOND WHEEL TOOL GRINDER CAT #532

  • Wadley, Alabama, United States
  • Jan 30th
Tetco Inc 6247-3262 Blade

Tetco Inc 6247-3262 Blade

  • Peoria, Illinois, United States
  • Jan 30th
8" x 24" Thompson Type 2F Hydraulic Surface Grinder

8" x 24" Thompson Type 2F Hydraulic Surface Grinder

  • Dayton, Ohio, United States
  • Jan 30th
Small Wheel “D-D Work Rest” Fits KnifeDog Holder For Wilton/Jet Square Grinder

Small Wheel “D-D Work Rest” Fits KnifeDog Holder For Wilton/Jet Square Grinder

  • North Bend, Washington, United States
  • Jan 30th
GRINDING GRINDER WHEEL BLOTTERS VARIOUS SIZES (LOT OF 83) #52610

GRINDING GRINDER WHEEL BLOTTERS VARIOUS SIZES (LOT OF 83) #52610

  • Resaca, Georgia, United States
  • Jan 30th
ATCO Punch-Mate Precision Grinding w/ Center Height of 3" Model #1 Made in USA

ATCO Punch-Mate Precision Grinding w/ Center Height of 3" Model #1 Made in USA

  • East Brunswick, New Jersey, United States
  • Jan 30th
ACME Saw Setter

ACME Saw Setter

  • Kent, Washington, United States
  • Jan 30th
Matson 14" x 60" Surface Grinder

Matson 14" x 60" Surface Grinder

  • Johnson City, Tennessee, United States
  • Jan 30th
GRINDING DRIVE DOG 27/32 MAX CAPACITY 3 1/4 X 1 1/8 #8118

GRINDING DRIVE DOG 27/32 MAX CAPACITY 3 1/4 X 1 1/8 #8118

  • Resaca, Georgia, United States
  • Jan 30th
Diehl Cutter Head Grinder

Diehl Cutter Head Grinder

  • Lake Wales, Florida, United States
  • Jan 30th
GRINDING DRIVE DOG 1" MAX CAPACITY 3 1/8" LONG X 1 3/4" WIDE #8112

GRINDING DRIVE DOG 1" MAX CAPACITY 3 1/8" LONG X 1 3/4" WIDE #8112

  • Resaca, Georgia, United States
  • Jan 30th
(1) Harig Manual Surface Grinder - Used - AM10598

(1) Harig Manual Surface Grinder - Used - AM10598

  • Cleveland, Ohio, United States
  • Jan 30th
3M 41U Stikit Paper 250 Disc Roll , Silicon Carbide, 6" Diameter, 150 Grit,

3M 41U Stikit Paper 250 Disc Roll , Silicon Carbide, 6" Diameter, 150 Grit,

  • Simi Valley, California, United States
  • Jan 30th
Dumore 3/4 hp Tool Post Grinder HUGE LOT THREE Spindles + Grinding Discs

Dumore 3/4 hp Tool Post Grinder HUGE LOT THREE Spindles + Grinding Discs

  • Whitestone, New York, United States
  • Jan 30th
MANDREL LATHE GRINDING MANDREL 1.368 - 1.375 OVERALL LENGTH 10" #8324

MANDREL LATHE GRINDING MANDREL 1.368 - 1.375 OVERALL LENGTH 10" #8324

  • Resaca, Georgia, United States
  • Jan 30th
MANDREL LATHE GRINDING MANDREL .8645 - .8655 OVERALL LENGTH 8-1/4" #8341

MANDREL LATHE GRINDING MANDREL .8645 - .8655 OVERALL LENGTH 8-1/4" #8341

  • Resaca, Georgia, United States
  • Jan 30th
WEILER 106-1119 INDUSTRIAL GRINDING WHEEL STEEL 11IN DIAMETER 1IN WIDTH B225450

WEILER 106-1119 INDUSTRIAL GRINDING WHEEL STEEL 11IN DIAMETER 1IN WIDTH B225450

  • Buffalo, New York, United States
  • Jan 30th

People who viewed this item also vieved

NICE LATE 16"/24" x 80" SUMMIT 16-3-80 GAP BED ENGINE LATHE - FULLY TOOLED

NICE LATE 16"/24" x 80" SUMMIT 16-3-80 GAP BED ENGINE LATHE - FULLY TOOLED

  • Harrison, New Jersey, United States
  • Mar 11th
HEAVY DUTY HAND KNURLING TOOL

HEAVY DUTY HAND KNURLING TOOL

  • Farmington, Michigan, United States
  • Mar 11th
LATE 14"/20" x 40" KENT GAP BED ENGINE LATHE. INCH-METRIC, WELL TOOLED

LATE 14"/20" x 40" KENT GAP BED ENGINE LATHE. INCH-METRIC, WELL TOOLED

  • Harrison, New Jersey, United States
  • Mar 11th
(2) DOUBLE ANGLE MILLING CUTTERS 2-3/4 X 1/2 X 1 X 45 DEG HSS STK 2567

(2) DOUBLE ANGLE MILLING CUTTERS 2-3/4 X 1/2 X 1 X 45 DEG HSS STK 2567

  • Wadley, Alabama, United States
  • Mar 12th
10 METCUT COUNTERBORE SPOT FACER 1.750"

10 METCUT COUNTERBORE SPOT FACER 1.750"

  • Austin, Texas, United States
  • Mar 12th
Lot Of 2 HS MILL MILLING SLOT CUTTERS, 3" x 1" x 1-1/4" USA!

Lot Of 2 HS MILL MILLING SLOT CUTTERS, 3" x 1" x 1-1/4" USA!

  • San Bernardino, California, United States
  • Mar 12th
VINTAGE MACHINISTS DERBYSHIRE LATHE " ELECT" 18" plus a custom tail rod rest

VINTAGE MACHINISTS DERBYSHIRE LATHE " ELECT" 18" plus a custom tail rod rest

  • Hawthorne, New Jersey, United States
  • Jun 7th
Antique Seneca Falls Flat Belt Metal Cutting Lathe

Antique Seneca Falls Flat Belt Metal Cutting Lathe

  • Huntsburg, Ohio, United States
  • Jun 8th
Stimpson Rivet Machine

Stimpson Rivet Machine

  • Brooklyn, New York, United States
  • Jun 8th
Seco 22mm Indexable Drill 1" Shank 3.5" LOC SD 504 22 88 25 R 7 (LOC573A)

Seco 22mm Indexable Drill 1" Shank 3.5" LOC SD 504 22 88 25 R 7 (LOC573A)

  • Laingsburg, Michigan, United States
  • May 24th
Hanson Tool 60260 High Speed Drill Bit Set

Hanson Tool 60260 High Speed Drill Bit Set

  • Winter Haven, Florida, United States
  • May 24th
Smith Tool Automotive Shank Bilz #1 Rigid Tapping Chuck 221 217 (LOC573A)

Smith Tool Automotive Shank Bilz #1 Rigid Tapping Chuck 221 217 (LOC573A)

  • Laingsburg, Michigan, United States
  • May 24th
Spring- Blue- 1/2" x 3 1/2" part number 13214

Spring- Blue- 1/2" x 3 1/2" part number 13214

  • Lansing, Illinois, United States
  • May 26th
Spring- Blue- 1/2" OD x 2 1/2" Free Length, part number 13210

Spring- Blue- 1/2" OD x 2 1/2" Free Length, part number 13210

  • Lansing, Illinois, United States
  • May 26th
trumpf TF 350 part # 0118129 punch for sale new

trumpf TF 350 part # 0118129 punch for sale new

  • Charlotte, North Carolina, United States
  • May 26th
DoALL Vertical Band Saw Model 2013-V

DoALL Vertical Band Saw Model 2013-V

  • Phoenix, Arizona, United States
  • May 27th
Automatic Cold Saw for Cutting Metal Steel Bar Rod with 6 Meters Auto Loader

Automatic Cold Saw for Cutting Metal Steel Bar Rod with 6 Meters Auto Loader

  • Mexico City, mexico, Mexico
  • May 27th
JUI CHUN 9" x 16" Horizontal Band Saw (New 1996)

JUI CHUN 9" x 16" Horizontal Band Saw (New 1996)

  • Hauppauge, New York, United States
  • May 27th
Bridgeport B-3 1/8" Collet

Bridgeport B-3 1/8" Collet

  • Ansonia, Connecticut, United States
  • May 28th
Bridgeport B-3 19/64" Collet

Bridgeport B-3 19/64" Collet

  • Ansonia, Connecticut, United States
  • May 28th
slip finishing machnist milling die maker gumsmith stones Lot 12pc asorted grits

slip finishing machnist milling die maker gumsmith stones Lot 12pc asorted grits

  • Melbourne, Florida, United States
  • May 28th
Sodick 4112292

Sodick 4112292

  • Anoka, Minnesota, United States
  • May 28th
EDM COPPER TUNGSTON EDM ELECTRODE MATERIAL NEW 2 PC --- LOC F-18

EDM COPPER TUNGSTON EDM ELECTRODE MATERIAL NEW 2 PC --- LOC F-18

  • Huntington Beach, California, United States
  • May 28th
EROWA ER-008617 Gauging pin , RH-N0005 , RHS

EROWA ER-008617 Gauging pin , RH-N0005 , RHS

  • Plainwell, Michigan, United States
  • May 28th
H & G CHASERS 100 SERIES SIZE 1/4" ANPT PIPE

H & G CHASERS 100 SERIES SIZE 1/4" ANPT PIPE

  • Cadiz, Kentucky, United States
  • May 31st
H & G 103 DH SERIES CHASER BLOCKS 17/32"-3/4"

H & G 103 DH SERIES CHASER BLOCKS 17/32"-3/4"

  • Cadiz, Kentucky, United States
  • May 31st
H & G CHASERS 100 SERIES SIZE 5/8"-18 RIGHT HAND

H & G CHASERS 100 SERIES SIZE 5/8"-18 RIGHT HAND

  • Cadiz, Kentucky, United States
  • May 31st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies