+ Post new Ad
Aircraft Tools (30) NOS 1/4-28 Threaded Drill Bits + (15) Step Bits NTB-9, US $20.00 – Picture 0
Aircraft Tools (30) NOS 1/4-28 Threaded Drill Bits + (15) Step Bits NTB-9, US $20.00 – Picture 0

Aircraft Tools (30) Nos 1/4-28 Threaded Drill Bits + (15) Step Bits Ntb-9

US $20.00

  • McMinnville, Oregon, United States
  • Aug 17th
Open on mobile:
QR code
Aircraft Tools (30) New Old Stock 1/4-28 Threaded CobaltDrill Bits: #40=5, #30=10, #20=2, #13=6, #10=2, #8=1, #2=1,  F=1, 1/4=1, unmarked. Also (15) Used Threaded Piloted Step  Bits mostly 1/8 size pilot and 10-14 finish sizes. These Step Bits are used but in good condition. They have been in storage.  45 items total. See pictures. We do offer combined shipping on multiple items. Please put your items for purchase in your cart and request invoice before  you pay. Thanks!
“New Old Stock Threaded Cobalt Drill Bits. The Piloted Step Bits are used but in good condition. Have been in storage.”
MPN Does Not Apply
Brand Unknown

Directions

Similar products from Other Drilling Tools

MAC TOOLS 6338DSB 29-PC COBALT DRILL BIT SET NEW OTHER

MAC TOOLS 6338DSB 29-PC COBALT DRILL BIT SET NEW OTHER

  • Whiting, Iowa, United States
  • Aug 18th
Allied #3 Series Spade Drill Holder

Allied #3 Series Spade Drill Holder

  • Michigan City, Indiana, United States
  • Aug 18th
YG-1 DRILL C`Sink, Solid Carbide 0.1865 x 0.3937 x 1.00 x 3.465 2 FL "LOT OF 15"

YG-1 DRILL C`Sink, Solid Carbide 0.1865 x 0.3937 x 1.00 x 3.465 2 FL "LOT OF 15"

  • Paramount, California, United States
  • Aug 18th
YG-1 DRILL C`Sink, Solid Carbide 0.1915 x 0.375 x 0.450 x 2.485 2FL "LOT OF 27"

YG-1 DRILL C`Sink, Solid Carbide 0.1915 x 0.375 x 0.450 x 2.485 2FL "LOT OF 27"

  • Paramount, California, United States
  • Aug 18th
Big Gator Tools STD1000DGNP Portable V-DrillGuide w/17 SAE Hole Sizes

Big Gator Tools STD1000DGNP Portable V-DrillGuide w/17 SAE Hole Sizes

  • Atlanta, Georgia, United States
  • Aug 18th
18194J Slugger Annular Cutter 1-7/16" DOC 4" 3/4" Weldon shank

18194J Slugger Annular Cutter 1-7/16" DOC 4" 3/4" Weldon shank

  • Sun City, Arizona, United States
  • Aug 18th
Walter 3.4mm 140° Point Spiral Fl Solid Carbide Taper Length Drill Bit 5093090

Walter 3.4mm 140° Point Spiral Fl Solid Carbide Taper Length Drill Bit 5093090

  • Venice, Florida, United States
  • Aug 18th
Precision Twist Drill 1 inch Bit 1/2 inch shank Cobalt New Made In USA

Precision Twist Drill 1 inch Bit 1/2 inch shank Cobalt New Made In USA

  • Bradenton, Florida, United States
  • Aug 18th
4 QTY Drillco SA-3 Double Cut Solid Carbide Burs 7A124ADC

4 QTY Drillco SA-3 Double Cut Solid Carbide Burs 7A124ADC

  • Athens, Georgia, United States
  • Aug 18th
KENNAMETAL DRILL BIT, 8 MM DIA., B271Z08000HPG, 5-5/8" FLUTE, 7-1/4" OAL

KENNAMETAL DRILL BIT, 8 MM DIA., B271Z08000HPG, 5-5/8" FLUTE, 7-1/4" OAL

  • Coffeyville, Kansas, United States
  • Aug 17th
1 pc. 1/4 SOLID CARBIDE SPADE DRILL USA (loc S16)

1 pc. 1/4 SOLID CARBIDE SPADE DRILL USA (loc S16)

  • Carrollton, Texas, United States
  • Aug 17th
Scrap Carbide Drills.....18 Pounds of Resharpened & Dull Solid Carbide Drills

Scrap Carbide Drills.....18 Pounds of Resharpened & Dull Solid Carbide Drills

  • Cincinnati, Ohio, United States
  • Aug 17th
#50 (.0700") Carbide Jobber Length Drill 118° Notched Point Melin USA EDP# 17106

#50 (.0700") Carbide Jobber Length Drill 118° Notched Point Melin USA EDP# 17106

  • Seminole, Florida, United States
  • Aug 17th
#77 (.0180") Diameter Carbide Jobber Drill 118° Point Ultra-Tool® USA #51177

#77 (.0180") Diameter Carbide Jobber Drill 118° Point Ultra-Tool® USA #51177

  • Seminole, Florida, United States
  • Aug 17th
DRILL INDEX 45 DRILL BITS ATM AVILDSEN TOOLS & MACH INC. NEW YORK-CHICAGO

DRILL INDEX 45 DRILL BITS ATM AVILDSEN TOOLS & MACH INC. NEW YORK-CHICAGO

  • Puyallup, Washington, United States
  • Aug 17th
2 1/2 O.D. COOLANT THRU INDEXABLE INSERT DRILL 2" SHANK 2 FL 2.5 HOLDS SNMG

2 1/2 O.D. COOLANT THRU INDEXABLE INSERT DRILL 2" SHANK 2 FL 2.5 HOLDS SNMG

  • Dayton, Ohio, United States
  • Aug 17th
KENDEX METCUT 3" O.D. INDEXABLE INSERT DRILL 270-0300 2 1/2 SHANK 2 FL 3.0 SNMG

KENDEX METCUT 3" O.D. INDEXABLE INSERT DRILL 270-0300 2 1/2 SHANK 2 FL 3.0 SNMG

  • Dayton, Ohio, United States
  • Aug 17th
AMEC ABOUT 2 1/2 O.D. INDEXABLE SPADE DRILL 24050S-0051 MORSE TAPER #5 SHANK

AMEC ABOUT 2 1/2 O.D. INDEXABLE SPADE DRILL 24050S-0051 MORSE TAPER #5 SHANK

  • Dayton, Ohio, United States
  • Aug 17th
ABOUT 3 1/8 O.D. COOLANT INDEXABLE INSERT SPADE DRILL MORSE TAPER #5 SHANK MT5

ABOUT 3 1/8 O.D. COOLANT INDEXABLE INSERT SPADE DRILL MORSE TAPER #5 SHANK MT5

  • Dayton, Ohio, United States
  • Aug 17th
AMEC UP TO 5" O.D. INDEXABLE SPADE DRILL G-500-5MT-SR MORSE TAPER #5 SHANK MT5

AMEC UP TO 5" O.D. INDEXABLE SPADE DRILL G-500-5MT-SR MORSE TAPER #5 SHANK MT5

  • Dayton, Ohio, United States
  • Aug 17th

People who viewed this item also vieved

CLEFORGE 1/2" COOLANT INDUCED TAPER SHANK DRILL BIT 3MT

CLEFORGE 1/2" COOLANT INDUCED TAPER SHANK DRILL BIT 3MT

  • Wadley, Alabama, United States
  • Jan 30th
CLEFORGE 5/8" COOLANT INDUCED TAPER SHANK DRILL BIT 3MT

CLEFORGE 5/8" COOLANT INDUCED TAPER SHANK DRILL BIT 3MT

  • Wadley, Alabama, United States
  • Jan 30th
USED ERICKSON TOOL SPADE DRILL 1.31"

USED ERICKSON TOOL SPADE DRILL 1.31"

  • Minneapolis, Minnesota, United States
  • Jan 30th
5/8” Carbide Center Drill, 6” OAL, NOS

5/8” Carbide Center Drill, 6” OAL, NOS

  • Hopkinsville, Kentucky, United States
  • Jan 30th
No 44, 6 in., W.G. Aircraft, EXT Drill, (Qty 12)

No 44, 6 in., W.G. Aircraft, EXT Drill, (Qty 12)

  • Hopkinsville, Kentucky, United States
  • Jan 30th
1/2" USA C/T Taper Length Drill

1/2" USA C/T Taper Length Drill

  • Hopkinsville, Kentucky, United States
  • Jan 30th
American Tool A91152 | Drill S&D | 13/16" | Made in USA

American Tool A91152 | Drill S&D | 13/16" | Made in USA

  • Belleville, New Jersey, United States
  • Jan 30th
American Tool A91136 | Drill S&D | 9/16" | Made in USA

American Tool A91136 | Drill S&D | 9/16" | Made in USA

  • Belleville, New Jersey, United States
  • Jan 30th
American Tool A91156 | Drill S&D |7/8" | Made in USA

American Tool A91156 | Drill S&D |7/8" | Made in USA

  • Belleville, New Jersey, United States
  • Jan 30th
10 PCS DRILLS D 2,3 mm for carbon and alloyed steels..

10 PCS DRILLS D 2,3 mm for carbon and alloyed steels..

  • Pavlograd, Dnepropetrovsk, Ukraine
  • Jan 30th
10 PCS DRILLS D 2,2 mm for carbon and alloyed steels..

10 PCS DRILLS D 2,2 mm for carbon and alloyed steels..

  • Pavlograd, Dnepropetrovsk, Ukraine
  • Jan 30th
10 PCS DRILLS D 2,1 mm for carbon and alloyed steels..

10 PCS DRILLS D 2,1 mm for carbon and alloyed steels..

  • Pavlograd, Dnepropetrovsk, Ukraine
  • Jan 30th
SOLID CARBIDE DRILLS #82 (4 PCS)

SOLID CARBIDE DRILLS #82 (4 PCS)

  • Cadiz, Kentucky, United States
  • Jan 30th
(5 pc)-5 mm Diameter 4 Flute Carbide End Mill, 16 mm LOC*LAST ONE*

(5 pc)-5 mm Diameter 4 Flute Carbide End Mill, 16 mm LOC*LAST ONE*

  • Grass Lake, Michigan, United States
  • Jan 30th
KYOCERA TYCOM CARBIDE DRILLS 1/16" .800" SERIES 2300 CB ROUTER-DP

KYOCERA TYCOM CARBIDE DRILLS 1/16" .800" SERIES 2300 CB ROUTER-DP

  • Apple Valley, California, United States
  • Jan 30th
TRW USA 1" DIA STRAIGHT SHANK (END MILL) DRILL 3 3/4 inch Long - Flute 2

TRW USA 1" DIA STRAIGHT SHANK (END MILL) DRILL 3 3/4 inch Long - Flute 2

  • Prairie Grove, Arkansas, United States
  • Jan 30th
12.5mm Metric HSS Taper Shank MTS Twist Drill 12.5 MM NEW - D3

12.5mm Metric HSS Taper Shank MTS Twist Drill 12.5 MM NEW - D3

  • Cleveland, Ohio, United States
  • Jan 30th
5X5 DRILL BIT EXTENSION SOCKET Morse Collis 20 3/4" HIGH SPEED LATHE MILL #56

5X5 DRILL BIT EXTENSION SOCKET Morse Collis 20 3/4" HIGH SPEED LATHE MILL #56

  • Tonawanda, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies