+ Post new Ad
ALLIED 96" Wide Sheet Die, Thickness 0.50, Restrictor Bar, Removable Lower Lips, US $18,500.00 – Picture 0
ALLIED 96" Wide Sheet Die, Thickness 0.50, Restrictor Bar, Removable Lower Lips, US $18,500.00 – Picture 1
ALLIED 96" Wide Sheet Die, Thickness 0.50, Restrictor Bar, Removable Lower Lips, US $18,500.00 – Picture 2
ALLIED 96" Wide Sheet Die, Thickness 0.50, Restrictor Bar, Removable Lower Lips, US $18,500.00 – Picture 3
ALLIED 96" Wide Sheet Die, Thickness 0.50, Restrictor Bar, Removable Lower Lips, US $18,500.00 – Picture 4
ALLIED 96" Wide Sheet Die, Thickness 0.50, Restrictor Bar, Removable Lower Lips, US $18,500.00 – Picture 0
ALLIED 96" Wide Sheet Die, Thickness 0.50, Restrictor Bar, Removable Lower Lips, US $18,500.00 – Picture 1
ALLIED 96" Wide Sheet Die, Thickness 0.50, Restrictor Bar, Removable Lower Lips, US $18,500.00 – Picture 2
ALLIED 96" Wide Sheet Die, Thickness 0.50, Restrictor Bar, Removable Lower Lips, US $18,500.00 – Picture 3
ALLIED 96" Wide Sheet Die, Thickness 0.50, Restrictor Bar, Removable Lower Lips, US $18,500.00 – Picture 4

Allied 96" Wide Sheet Die, Thickness 0.50, Restrictor Bar, Removable Lower Lips

US $18,500.00

  • Rochester, Michigan, United States
  • Jan 30th
Open on mobile:
QR code
         7918  E McClain Drive Suite 101 Scottsdale AZ 85260   Tel: 480-212-0775 Fax: 480-922-1675            We are pleased to offer the following for your consideration : One (1) ALLIED 96" Wide Sheet Die Die Width 96" Thickness .50 Restrictor Bar Removable Lower Lips Could go up to a 1.0" thick with the lower lip removed We can provide shipping quotes upon your request.  Contact K.D. Capital Equipment at 480-922-1674 with any questions, etc. Any descriptions of the condition of the equipment are not warranties and any equipment descriptions are intended only as a guide and their accuracy is not guaranteed and must be independently verified by the buyer.   *Machine locations may vary, please contact K.D. Capital for current locations.* 
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand ALLIED
MPN 6131663
Model 96" Wide Sheet Die

Directions

Similar products from IBM Processing

NEW FAST HEAT CS024636 HEATER CARTRIDGE 120V-AC 2-1/2 IN 1/2 IN 100W D428661

NEW FAST HEAT CS024636 HEATER CARTRIDGE 120V-AC 2-1/2 IN 1/2 IN 100W D428661

  • Delta, Ohio, United States
  • Jan 30th
Injection Molding Machine, Newbury Industries Model # V330RS

Injection Molding Machine, Newbury Industries Model # V330RS

  • Wilmington, Massachusetts, United States
  • Jan 30th
NEW 10 Ton Air Cooled Chiller | PRM Series

NEW 10 Ton Air Cooled Chiller | PRM Series

  • San Bernardino, California, United States
  • Jan 30th
NEW 1080 Ton Injection Molding Machine

NEW 1080 Ton Injection Molding Machine

  • San Bernardino, California, United States
  • Jan 30th
NEW Plastic Auto Loader | 880lbs/hr

NEW Plastic Auto Loader | 880lbs/hr

  • San Bernardino, California, United States
  • Jan 30th
NEW Plastic Auto Loader | 990lbs/hr

NEW Plastic Auto Loader | 990lbs/hr

  • San Bernardino, California, United States
  • Jan 30th
Two (2) 1974/1984 Impco B-30-R180, # of Heads on each: 2, Platens on each: 24x30

Two (2) 1974/1984 Impco B-30-R180, # of Heads on each: 2, Platens on each: 24x30

  • Hainesport, New Jersey, United States
  • Jan 30th
Three (3) Wortex UP-750, Throat on each: 7" x 50", 50HP

Three (3) Wortex UP-750, Throat on each: 7" x 50", 50HP

  • Burbank, California, United States
  • Jan 30th
1994 Jomar 135E, L/D Ratio 25:1, 125 HP, Max Die Set Size: 35.5" x 19.0"

1994 Jomar 135E, L/D Ratio 25:1, 125 HP, Max Die Set Size: 35.5" x 19.0"

  • Elk Grove Village, Illinois, United States
  • Jan 30th
1995 Goodman GP600-7000, Contact area: 3" x 8', Small Profile Conveyor W/BlowOff

1995 Goodman GP600-7000, Contact area: 3" x 8', Small Profile Conveyor W/BlowOff

  • Mankato, Minnesota, United States
  • Jan 30th
EIGHT (8) INCOE HEATERS WITH T/C -- XRH - 250A ----- 230 VOLTS 200 WATTS

EIGHT (8) INCOE HEATERS WITH T/C -- XRH - 250A ----- 230 VOLTS 200 WATTS

  • Anderson, South Carolina, United States
  • Jan 30th
Nissei NS10-1A Injection Molding Machine 1996

Nissei NS10-1A Injection Molding Machine 1996

  • Warminster, Pennsylvania, United States
  • Jan 30th
Kawaguchi Plastic Injection Molding Machine

Kawaguchi Plastic Injection Molding Machine

  • Kingwood, Texas, United States
  • Jan 30th
NEW FAST HEAT CH025788HW HEATER ELEMENT CARTRIDGE 240V-AC 6 IN 1000W D256549

NEW FAST HEAT CH025788HW HEATER ELEMENT CARTRIDGE 240V-AC 6 IN 1000W D256549

  • Delta, Ohio, United States
  • Jan 30th
Arburg - Allrounder 221 (221-50-250) Injection Moulder

Arburg - Allrounder 221 (221-50-250) Injection Moulder

  • Greenwich, Connecticut, United States
  • Jan 30th
Injection Molding Machine Time, 15 - 250 Ton in Dallas, TX Starting at $25/hr

Injection Molding Machine Time, 15 - 250 Ton in Dallas, TX Starting at $25/hr

  • Plano, Texas, United States
  • Jan 30th
1999 200 Ton Toyo Electric, 200 Ton, 7.03 oz, PLCS-9 Control

1999 200 Ton Toyo Electric, 200 Ton, 7.03 oz, PLCS-9 Control

  • Anaheim, California, United States
  • Jan 30th
Krauss Maffei 4130804 Thermo Switch NGT#08 for CD-94 Mold

Krauss Maffei 4130804 Thermo Switch NGT#08 for CD-94 Mold

  • Fitchburg, Massachusetts, United States
  • Jan 30th
DIY plastic injector mold machine PDF and 3D PLANS

DIY plastic injector mold machine PDF and 3D PLANS

  • Santa Teresita, Buenos Aires, Argentina
  • Jan 30th
NEWBURY (1986) 150-TON 9.1 OZ PLASTIC INJECTION MOLDING MACHINE

NEWBURY (1986) 150-TON 9.1 OZ PLASTIC INJECTION MOLDING MACHINE

  • Watertown, South Dakota, United States
  • Jan 30th

People who viewed this item also vieved

SIBE AUTOMATION VACUUM FORMING MACHINE 60"x84" TWO STATION DUAL HEAT DUAL PLATEN

SIBE AUTOMATION VACUUM FORMING MACHINE 60"x84" TWO STATION DUAL HEAT DUAL PLATEN

  • Ocala, Florida, United States
  • Jun 14th
Cumberland 14" Pelletizer 24 Knife Rotor

Cumberland 14" Pelletizer 24 Knife Rotor

  • Gardner, Massachusetts, United States
  • Jun 14th
Z-PCABS Ivory 3D Printing Filament – 800g Spool

Z-PCABS Ivory 3D Printing Filament – 800g Spool

  • San Clemente, California, United States
  • Jun 14th
Used- Brown Horizontal Mechanical Trim Press. Dual fly wheel drive, 43” x 12.5”

Used- Brown Horizontal Mechanical Trim Press. Dual fly wheel drive, 43” x 12.5”

  • Bensenville, Illinois, United States
  • Jun 14th
Used- Werner Pfleiderer 25mm Twin Screw Extruder, Type ZSK 25 P8.2 E-PULA. Co-Ro

Used- Werner Pfleiderer 25mm Twin Screw Extruder, Type ZSK 25 P8.2 E-PULA. Co-Ro

  • Bensenville, Illinois, United States
  • Jun 14th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies