+ Post new Ad
Allied Machine and Engineering 240Z0H-075F - Z 3/8-27/64 Drill Holder. AMEC, US $100.00 – Picture 0
Allied Machine and Engineering 240Z0H-075F - Z 3/8-27/64 Drill Holder. AMEC, US $100.00 – Picture 0

Allied Machine And Engineering 240z0h-075f - Z 3/8-27/64 Drill Holder. Amec

US $100.00

  • United States
  • Jan 30th
Open on mobile:
QR code
Indexable Cutting Tools - Z 3/8-27/64  STANDARD T-A FLG SH HEL FL DR HLDR, Spade Drills;  Series: Z;  Minimum Drill Diameter (Inch): 7/16;  Maximum Drill Diameter (Inch): 1/2;  Spade Drill Length: Standard Length;  Shank Type: Straight Shank;  Flange Type: Yes
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Model 240Z0H-075F
Manufacturer Allied Machine and Engineering

Directions

Similar products from Indexable Tool Holders

NEXUS Tool 5/8" APKT 1003 Indexable End Mill Carbide Inserts Lamina LT30 939SO

NEXUS Tool 5/8" APKT 1003 Indexable End Mill Carbide Inserts Lamina LT30 939SO

  • Montville, Ohio, United States
  • Jan 30th
Carbide Insert, RCKT 13 04 00WM H10F, 2 Packs of 10 (sandvik)

Carbide Insert, RCKT 13 04 00WM H10F, 2 Packs of 10 (sandvik)

  • Tonawanda, New York, United States
  • Jan 30th
SANDVIK CARBIDE TURNING INSERT - VNGG 331-SGF H13A

SANDVIK CARBIDE TURNING INSERT - VNGG 331-SGF H13A

  • Fort Myers, Florida, United States
  • Jan 30th
CAT50 CNC V-Flange Reaming Ream Tool Holder CAT 50

CAT50 CNC V-Flange Reaming Ream Tool Holder CAT 50

  • Leander, Texas, United States
  • Jan 30th
CAT50 CNC V-Flange Tool Holder w/ NEW Cutter Kennametal

CAT50 CNC V-Flange Tool Holder w/ NEW Cutter Kennametal

  • Leander, Texas, United States
  • Jan 30th
SECO DNMG 431 150404-M5 Grade TM3500 10pc Pack

SECO DNMG 431 150404-M5 Grade TM3500 10pc Pack

  • Tulsa, Oklahoma, United States
  • Jan 30th
ISCAR TANG GRIP TGFH 32-4 PARTING/CUTOFF BLADE **New**

ISCAR TANG GRIP TGFH 32-4 PARTING/CUTOFF BLADE **New**

  • Tulsa, Oklahoma, United States
  • Jan 30th
SECO OFER 070405TN-ME15 MP2500 10pc Pack

SECO OFER 070405TN-ME15 MP2500 10pc Pack

  • Tulsa, Oklahoma, United States
  • Jan 30th
SECO TNMG220408-MR7 TP3000 10pc Pack

SECO TNMG220408-MR7 TP3000 10pc Pack

  • Tulsa, Oklahoma, United States
  • Jan 30th
SECO CNMG 432 120408-M5 Grade TP2500 10pc NEW in Box

SECO CNMG 432 120408-M5 Grade TP2500 10pc NEW in Box

  • Tulsa, Oklahoma, United States
  • Jan 30th
VALENITE MCLNR-16-4D TOOL BIT HOLDER (TURNING TOOL) (1" X 3/4")

VALENITE MCLNR-16-4D TOOL BIT HOLDER (TURNING TOOL) (1" X 3/4")

  • Camarillo, California, United States
  • Jan 30th
Metal Masters 1230 Multi-Purpose Cutting Tool Set Rotary Technology Face Milling

Metal Masters 1230 Multi-Purpose Cutting Tool Set Rotary Technology Face Milling

  • Onalaska, Wisconsin, United States
  • Jan 30th
Allied Machine And Engineering 25005h-075f -Spade Drill Holder 39/64-11/16

Allied Machine And Engineering 25005h-075f -Spade Drill Holder 39/64-11/16

  • Rogers, Ohio, United States
  • Jan 30th
2" DIAMETER INDEXABLE SHELL FACE MILL W 3/4" BORE FOR CARBIDE INSERTS

2" DIAMETER INDEXABLE SHELL FACE MILL W 3/4" BORE FOR CARBIDE INSERTS

  • Ellington, New York, United States
  • Jan 30th
PAIR OF MILLSTAR INDEXABLE BALL NOSE END MILLS W/ 3/4" SHANKS & CARBIDE INSERTS

PAIR OF MILLSTAR INDEXABLE BALL NOSE END MILLS W/ 3/4" SHANKS & CARBIDE INSERTS

  • Ellington, New York, United States
  • Jan 30th
INDEXABLE RADIUS MILLING CUTTER W/ 3/4" SHANK

INDEXABLE RADIUS MILLING CUTTER W/ 3/4" SHANK

  • Ellington, New York, United States
  • Jan 30th
NEW & UNUSED CARBOLOY SOLID CARBIDE INDEXABLE INSERTS MODEL SNMG 323 E

NEW & UNUSED CARBOLOY SOLID CARBIDE INDEXABLE INSERTS MODEL SNMG 323 E

  • Ellington, New York, United States
  • Jan 30th
NEW & UNUSED CARBOLOY SOLID CARBIDE INDEXABLE INSERTS MODEL RNMG 32 E

NEW & UNUSED CARBOLOY SOLID CARBIDE INDEXABLE INSERTS MODEL RNMG 32 E

  • Ellington, New York, United States
  • Jan 30th
NEW & UNUSED SECO SOLID CARBIDE INDEXABLE INSERTS MODEL TPG 222F 370 18 PCS

NEW & UNUSED SECO SOLID CARBIDE INDEXABLE INSERTS MODEL TPG 222F 370 18 PCS

  • Ellington, New York, United States
  • Jan 30th
LOT OF 3 VALENITE V-CUT & VAL-GROOVE INDEXABLE CUT OFF BLADES

LOT OF 3 VALENITE V-CUT & VAL-GROOVE INDEXABLE CUT OFF BLADES

  • Ellington, New York, United States
  • Jan 30th

People who viewed this item also vieved

Toolmex-Tmx CAT40 5/8" Integral Keyless Precision Ball Bearing CNC Drill Chuck

Toolmex-Tmx CAT40 5/8" Integral Keyless Precision Ball Bearing CNC Drill Chuck

  • Hamden, Connecticut, United States
  • Jun 1st
CAT40 ER40X3.59 Collet Chuck Tool Holder ER40 X 3" Projection (20,000 Rpm)

CAT40 ER40X3.59 Collet Chuck Tool Holder ER40 X 3" Projection (20,000 Rpm)

  • Clifton, New Jersey, United States
  • Jun 1st
10 Carbide Boring Bars W/ Coolant Thru 3/4"- 3/16" Dia. 8" To 4" OAL + EndMills

10 Carbide Boring Bars W/ Coolant Thru 3/4"- 3/16" Dia. 8" To 4" OAL + EndMills

  • Milwaukee, Wisconsin, United States
  • Jun 3rd
BRIDGEPORT BORING MATE BORING AND FACING HEAD

BRIDGEPORT BORING MATE BORING AND FACING HEAD

  • Westlake, Ohio, United States
  • Jun 3rd
Jacobs A0133 Drill Arbor 1MT 01 1 Morse Taper x No 33 Chuck

Jacobs A0133 Drill Arbor 1MT 01 1 Morse Taper x No 33 Chuck

  • Flower Mound, Texas, United States
  • Jun 3rd
Milwaukee Arbor 49-57-0036 Quick Change Adapter 3/8" Shank / Steel Hawg Cutter

Milwaukee Arbor 49-57-0036 Quick Change Adapter 3/8" Shank / Steel Hawg Cutter

  • Blaine, Washington, United States
  • Jun 3rd
Lot of 4 Browning 1610 X 5/8 TAPER BORE BUSHING

Lot of 4 Browning 1610 X 5/8 TAPER BORE BUSHING

  • Mokena, Illinois, United States
  • Jun 4th
New - Browning Manufacturing Bushing Key, PN: P1-11/4", (1.25")

New - Browning Manufacturing Bushing Key, PN: P1-11/4", (1.25")

  • Magna, Utah, United States
  • Jun 4th
BT40 HAIMER SHRINK FIT TOOL HOLDER 3/4" LOC2382

BT40 HAIMER SHRINK FIT TOOL HOLDER 3/4" LOC2382

  • Sidney, Ohio, United States
  • Jun 6th
BT40 PARLEC B40-33JT1 TOOL HOLDER WITH ROHITI SPIRO CHUCK 1/2" LOC2381

BT40 PARLEC B40-33JT1 TOOL HOLDER WITH ROHITI SPIRO CHUCK 1/2" LOC2381

  • Sidney, Ohio, United States
  • Jun 6th
Vertical Plate Lifting Clamp With Lock Hoist Hook Chain Lifter Machine 1 pc

Vertical Plate Lifting Clamp With Lock Hoist Hook Chain Lifter Machine 1 pc

  • Scarborough, Ontario, Canada
  • Jun 9th
General S 94 Pin Vise Set of 4, in Case, 0 To .187'' Range Made In USA

General S 94 Pin Vise Set of 4, in Case, 0 To .187'' Range Made In USA

  • La Puente, California, United States
  • Jun 9th
HHIP 3900-4201 BT40 V-Flange to Jacobs JT4 Drill Chuck Arbor

HHIP 3900-4201 BT40 V-Flange to Jacobs JT4 Drill Chuck Arbor

  • US, United States
  • Jun 11th
1/2 Keyless Drill Chuck with JT33 Taper & 1/2 in Straight Shank 1/32" -1/2" CNC

1/2 Keyless Drill Chuck with JT33 Taper & 1/2 in Straight Shank 1/32" -1/2" CNC

  • Akron, Ohio, United States
  • Jun 11th
PDQ QUICK CHANGE M SERIES 1-1/2" ARBOR FACE MILL HOLDER W/ LOCK SCREW AND WASHER

PDQ QUICK CHANGE M SERIES 1-1/2" ARBOR FACE MILL HOLDER W/ LOCK SCREW AND WASHER

  • Albuquerque, New Mexico, United States
  • Jun 14th
Aloris BXA-4D Quick Change Boring Bar Holder

Aloris BXA-4D Quick Change Boring Bar Holder

  • Columbus, Ohio, United States
  • Jun 14th
2 SUNNEN UB-C PRECISION SHOES NEW IN BOX

2 SUNNEN UB-C PRECISION SHOES NEW IN BOX

  • Cleveland, Ohio, United States
  • Nov 4th
K10-354AS SUNNEN HONE MANDREL W/ ADAPTER & TURING SLEEVE .354" - .362" RANGE

K10-354AS SUNNEN HONE MANDREL W/ ADAPTER & TURING SLEEVE .354" - .362" RANGE

  • Cleveland, Ohio, United States
  • Nov 4th
1.5kw 24000rpm ER11 80mm 110V spindle motor&2.2kw 1phase 110V VFD inverter CNC

1.5kw 24000rpm ER11 80mm 110V spindle motor&2.2kw 1phase 110V VFD inverter CNC

  • DongGuan, China
  • Nov 9th
800w 24000rpm ER11 65mm 110V spinel motor&1.5kw 1phase 110V VFD inverter CNCkits

800w 24000rpm ER11 65mm 110V spinel motor&1.5kw 1phase 110V VFD inverter CNCkits

  • DongGuan, China
  • Nov 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies