+ Post new Ad
Alpha Workholding Magnetic Plate System 18x48 with T-Slots Electromagnet, US $6,000.00 – Picture 0
Alpha Workholding Magnetic Plate System 18x48 with T-Slots Electromagnet, US $6,000.00 – Picture 1
Alpha Workholding Magnetic Plate System 18x48 with T-Slots Electromagnet, US $6,000.00 – Picture 2
Alpha Workholding Magnetic Plate System 18x48 with T-Slots Electromagnet, US $6,000.00 – Picture 3
Alpha Workholding Magnetic Plate System 18x48 with T-Slots Electromagnet, US $6,000.00 – Picture 4
Alpha Workholding Magnetic Plate System 18x48 with T-Slots Electromagnet, US $6,000.00 – Picture 0
Alpha Workholding Magnetic Plate System 18x48 with T-Slots Electromagnet, US $6,000.00 – Picture 1
Alpha Workholding Magnetic Plate System 18x48 with T-Slots Electromagnet, US $6,000.00 – Picture 2
Alpha Workholding Magnetic Plate System 18x48 with T-Slots Electromagnet, US $6,000.00 – Picture 3
Alpha Workholding Magnetic Plate System 18x48 with T-Slots Electromagnet, US $6,000.00 – Picture 4

Alpha Workholding Magnetic Plate System 18x48 With T-slots Electromagnet

US $6,000.00

  • Wichita Falls, Texas, United States
  • Jan 30th
Open on mobile:
QR code
This is A almost new(used one time) Alpha Electromagnetic Plate AC-2000 SD.  The Installation & Operation Manual comes with it. It was ran on 480v, but in the book it looks like it could run on 380,415,440 and 460v.  Alpha Offers two different Types of standard control transformers. One for 110, 120, 208, 220 and 240. And this one.  So it shouldn't be hard to change over to run off of 110v if needed.  The Plate is 18x48x3.5"   its got mounting holes 45 1/2" by 12 1/2".  And  12 1/2 x 12 1/2  center set.  Please ask if you have any Questions.  Shipping is via fright, or you can pick up.

Directions

Similar products from Other Workholding Tools

Atlas # 10-76 & # 10-77 Rocker Shaft & Lever Cam / OO 210

Atlas # 10-76 & # 10-77 Rocker Shaft & Lever Cam / OO 210

  • Seffner, Florida, United States
  • Jan 30th
HUOT TOOLSCOOT TREE – 40 TAPER

HUOT TOOLSCOOT TREE – 40 TAPER

  • Murfreesboro, Tennessee, United States
  • Jan 30th
Bridgeport Milling , Oil Skimmer with Rotary Plate , VOS-850 , NEW

Bridgeport Milling , Oil Skimmer with Rotary Plate , VOS-850 , NEW

  • Miami, Florida, United States
  • Jan 30th
MACHINIST LATHE MILL NICE Lot of Machinist Mandrells Mandrel s for Work Holding

MACHINIST LATHE MILL NICE Lot of Machinist Mandrells Mandrel s for Work Holding

  • Morris Plains, New Jersey, United States
  • Jan 30th
TAFT-PEIRCE 5" X 4" RIGHT ANGLE MACHINE TOOL MACHINIST STRAIGHT EDGE 5X4X3-3/4

TAFT-PEIRCE 5" X 4" RIGHT ANGLE MACHINE TOOL MACHINIST STRAIGHT EDGE 5X4X3-3/4

  • Clover, South Carolina, United States
  • Jan 30th
TAFT-PEIRCE 10" X 7" RIGHT ANGLE MACHINE TOOL MACHINIST STRAIGHT EDGE 10X7X5-1/2

TAFT-PEIRCE 10" X 7" RIGHT ANGLE MACHINE TOOL MACHINIST STRAIGHT EDGE 10X7X5-1/2

  • Clover, South Carolina, United States
  • Jan 30th
TAFT-PEIRCE MACHINE TOOL MACHINIST TOOL MAKER 6-1/2"X4-1/4" MAGNETIC KNEE CHUCK

TAFT-PEIRCE MACHINE TOOL MACHINIST TOOL MAKER 6-1/2"X4-1/4" MAGNETIC KNEE CHUCK

  • Clover, South Carolina, United States
  • Jan 30th
TAFT-PEIRCE PARALLELS 3X1-1/2X12 PARALLEL SET MACHINE TOOL MACHINIST TOOL MAKER

TAFT-PEIRCE PARALLELS 3X1-1/2X12 PARALLEL SET MACHINE TOOL MACHINIST TOOL MAKER

  • Clover, South Carolina, United States
  • Jan 30th
ASSORTED LOT OF T-NUTS AND 1/2" BOLTS

ASSORTED LOT OF T-NUTS AND 1/2" BOLTS

  • Ellington, New York, United States
  • Jan 30th
1 STRICH AUSSCHLAG MACHINE TOOL TOOL MAKER SQUARE LEVEL TOOL 7-7/8"X7-7/8"

1 STRICH AUSSCHLAG MACHINE TOOL TOOL MAKER SQUARE LEVEL TOOL 7-7/8"X7-7/8"

  • Clover, South Carolina, United States
  • Jan 30th
ENCO TAILSTOCK TURRET MODEL-A-#2 ARBOR

ENCO TAILSTOCK TURRET MODEL-A-#2 ARBOR

  • Bethlehem, Connecticut, United States
  • Jan 30th
WARNER & SWASEY Mdl# 1AB AUTOMATIC BAR MACHINE

WARNER & SWASEY Mdl# 1AB AUTOMATIC BAR MACHINE

  • Mansfield, Ohio, United States
  • Jan 30th
Original South Bend 9" A B or C 10K Headstock Spindle See photos & description

Original South Bend 9" A B or C 10K Headstock Spindle See photos & description

  • Moneta, Virginia, United States
  • Jan 30th
VISE GRIPS, SET OF 4, --- 2 ROUND NOSE, 2 NEEDLE NOSE

VISE GRIPS, SET OF 4, --- 2 ROUND NOSE, 2 NEEDLE NOSE

  • Molena, Georgia, United States
  • Jan 30th
Jergens 40307B Cast Iron Speed Handle 8-3/4" Arm Spread Not Tapped Lot of 1

Jergens 40307B Cast Iron Speed Handle 8-3/4" Arm Spread Not Tapped Lot of 1

  • Denver, Colorado, United States
  • Jan 30th
MACHINIST LATHE MILL Unusual Parallel Clamp Wrench Tool for Machinist

MACHINIST LATHE MILL Unusual Parallel Clamp Wrench Tool for Machinist

  • Morris Plains, New Jersey, United States
  • Jan 30th
Enerpac Coupler Assembly AR400 / 4000 10,000 PSI

Enerpac Coupler Assembly AR400 / 4000 10,000 PSI

  • Kent, New York, United States
  • Jan 30th
5- New 4.5 Cylindrical Clecos 0 - 1/2" grip Wedgelock Cleco CBX-BF-4.5

5- New 4.5 Cylindrical Clecos 0 - 1/2" grip Wedgelock Cleco CBX-BF-4.5

  • Mineral Wells, Texas, United States
  • Jan 30th
10-New 4.5 Cylindrical Clecos 0 - 1/2" grip Wedgelock Cleco CBX-BF-4.5

10-New 4.5 Cylindrical Clecos 0 - 1/2" grip Wedgelock Cleco CBX-BF-4.5

  • Mineral Wells, Texas, United States
  • Jan 30th
100 New 4.5 Cylindrical Clecos 0 - 1/2" grip Wedgelock Cleco CBX-BF-4.5

100 New 4.5 Cylindrical Clecos 0 - 1/2" grip Wedgelock Cleco CBX-BF-4.5

  • Mineral Wells, Texas, United States
  • Jan 30th

People who viewed this item also vieved

Toolmaker Angle Plate 4 x 4 x 3 x 1.25

Toolmaker Angle Plate 4 x 4 x 3 x 1.25

  • Monroe, New York, United States
  • May 28th
1/8" x # 5C Collet

1/8" x # 5C Collet

  • Coventry, Rhode Island, United States
  • May 29th
5/8" x # 5C Collet

5/8" x # 5C Collet

  • Coventry, Rhode Island, United States
  • May 29th
NICE JACOB RUBBER FLEX COLLET SET J910 - J914 1/16 - 5/8"

NICE JACOB RUBBER FLEX COLLET SET J910 - J914 1/16 - 5/8"

  • El Monte, California, United States
  • May 29th
Angle Plate 4" x 4" x 6" Webbed Cast Iron? rough needs maching

Angle Plate 4" x 4" x 6" Webbed Cast Iron? rough needs maching

  • Grand Rapids, Michigan, United States
  • May 29th
ENRON #1 CAST IRON ANGLE PLATE 3" x 2" x 2 1/2" IN BOX MACHINIST

ENRON #1 CAST IRON ANGLE PLATE 3" x 2" x 2 1/2" IN BOX MACHINIST

  • Hatboro, Pennsylvania, United States
  • May 29th
USED LATHE DEAD CENTER #8 JARNO (1.038" Point Diameter)

USED LATHE DEAD CENTER #8 JARNO (1.038" Point Diameter)

  • Fairfield, Iowa, United States
  • May 31st
RITEN 12216 SUPER ACCURATE LIVE CENTER 16 JARNO TAPER STANDARD POINT1-1/2

RITEN 12216 SUPER ACCURATE LIVE CENTER 16 JARNO TAPER STANDARD POINT1-1/2

  • Stanhope, New Jersey, United States
  • May 31st
SKODA 3-CSN 243324 LIVE CENTER 3-CSN243324 TAPERED SHANK

SKODA 3-CSN 243324 LIVE CENTER 3-CSN243324 TAPERED SHANK

  • Robertsdale, Alabama, United States
  • May 31st
TE-CO 20417 52 Piece Deluxe Clamping Set

TE-CO 20417 52 Piece Deluxe Clamping Set

  • Duncan, South Carolina, United States
  • May 31st
De-Sta-Co 1001-204-1068 Pneumatic Hold Down Clamp

De-Sta-Co 1001-204-1068 Pneumatic Hold Down Clamp

  • Kansas City, Missouri, United States
  • May 31st
Hargrave Body Clamp - No. 603-12 - RARE - SKU2258

Hargrave Body Clamp - No. 603-12 - RARE - SKU2258

  • Port Sydney, ON, Canada
  • May 31st
Gator TJ-PS3-160 CHUCK SIZE: 6' Number OF JAWS: 3 TJ-PS3-160

Gator TJ-PS3-160 CHUCK SIZE: 6' Number OF JAWS: 3 TJ-PS3-160

  • Duncan, South Carolina, United States
  • May 31st
Llambrich L40075B 13/64'-1' J5 BALL B.;DRILL CHUCK

Llambrich L40075B 13/64'-1' J5 BALL B.;DRILL CHUCK

  • Duncan, South Carolina, United States
  • May 31st
ABBOTT 1.5mmx60 Degress Serrated Chuck Jaws P KTT6A 6'' H 1.5'' L 3'' W 1.25''

ABBOTT 1.5mmx60 Degress Serrated Chuck Jaws P KTT6A 6'' H 1.5'' L 3'' W 1.25''

  • Duncan, South Carolina, United States
  • May 31st
Precision toolmakers vise

Precision toolmakers vise

  • Wethersfield, Connecticut, United States
  • Jun 1st
Vintage Starrett Hand Vise With Bench Mount

Vintage Starrett Hand Vise With Bench Mount

  • Meadville, Pennsylvania, United States
  • Jun 1st
CRAFTSMAN PALMGREN 2 1/2" TILTING MACHINISTS VISE

CRAFTSMAN PALMGREN 2 1/2" TILTING MACHINISTS VISE

  • Modesto, California, United States
  • Jun 1st
Starrett 278 V- Blocks Set & Clamps Nice

Starrett 278 V- Blocks Set & Clamps Nice

  • Santa Ana, California, United States
  • Jun 9th
Atco 1 Precision 4x4x3" Vee Block V-Block Machinist Toolmaker

Atco 1 Precision 4x4x3" Vee Block V-Block Machinist Toolmaker

  • Freehold, New Jersey, United States
  • Jun 9th
BROWN & SHARPE V-BLOCK 750-B #171

BROWN & SHARPE V-BLOCK 750-B #171

  • Freehold, New Jersey, United States
  • Jun 9th
Used Haas Ha5C Brush Style 5C Collet Rotary Table Indexer Red 4th axis & control

Used Haas Ha5C Brush Style 5C Collet Rotary Table Indexer Red 4th axis & control

  • Schaumburg, Illinois, United States
  • Jun 9th
Rotary Table, Vertex HV-14, 13 3/4" Dia Table

Rotary Table, Vertex HV-14, 13 3/4" Dia Table

  • New Durham, New Hampshire, United States
  • Jun 9th
Rotab 36" T-Slotted Precision Rotary Table

Rotab 36" T-Slotted Precision Rotary Table

  • Spartanburg, South Carolina, United States
  • Jun 9th
UNIVERSAL ENGINEERING / TSD ACURA-GRIP COLLET NUTS

UNIVERSAL ENGINEERING / TSD ACURA-GRIP COLLET NUTS

  • Orwell, Ohio, United States
  • Jun 17th
USED ERICKSON DOUBLE ANGLE DA100 STRAIGHT SHANK COLLET CHUCK

USED ERICKSON DOUBLE ANGLE DA100 STRAIGHT SHANK COLLET CHUCK

  • Fairfield, Iowa, United States
  • Jun 17th
USED KENNAMETAL DOUBLE ANGLE DA100 STRAIGHT SHANK COLLET CHUCK

USED KENNAMETAL DOUBLE ANGLE DA100 STRAIGHT SHANK COLLET CHUCK

  • Fairfield, Iowa, United States
  • Jun 17th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies