Altitude Encoder Readout Test Box --- Avionics Blind/encoding Altimeter Test Set

US $495.00

  • United States
  • Jan 29th
  ALTITUDE ENCODER READOUT TEST BOX MODEL AERTB-02448 This is a new product for the avionics test technician.  It reads out the Gray code altitude presented by a blind encoder or encoding altimeter and/or the serial altitude presented on the serial ports.  It can be used as a bench test readout or "under the panel" for in aircraft encoder correlation tests or troubleshooting encoder installations. The test box comes with one cable set for use with ACK Brand 15 pin blind encoders.  The cable inserts between the encoder connector and the aircraft encoder harness. In this mode the test box is powered by aircraft power through the test cable. The same cable set may be used on the bench with just an encoder.  In this mode the test box is powered by a separate power cable supplied. The test box is compatible with 12 or 24 VDC aircraft  voltages. Compare this Test Instrument to the competition.  This box decodes serial messages from seven(7) different message formats.  It displays the full message as well as the decoded altitude The competition only decodes one serial protocol and only displays limited lower altitude data. This Test Instrument presents simultaneous serial data messages, decoded serial altitude and parallel Gray code altitudes as well as visual indication of actual Gray code.   INCLUDED  with each purchase: AERTB-02448 Test Box 15 PIN Encoder cable  (Optional 25 PIN Cable set available) Power cord for cigarette lighter power Universal 9 Pin Serial Connector and Cable USER's MANUAL SPECIFICATIONS: Power Input                   10 to 32 VDC                                       0.10 Amps Max                                       Internally Fused   Range                            All Valid Codes from Minus 1200 ft to                                       +126,700 feet   Signal Input                  Standard Gray Code, Asserted Ground and/or Serial Altitude Data (RS232)   Gray Code Format        A1 A2 A4,   B1 B2 B4.  C1 C2 C4,  D1 D2 D4   Serial Format              Any of Seven(7) Common Serial Message Formats.  Two(2) Simultaneous Format Readouts.   Compatibility                 Any 12/24 volt Encoding Altimeter or Remote Encoder with                                       Appropriate Cable    See                               LongShadowElectronics.com Calibration                     None Required This is a valuable new avionics test box designed to be used for daily bench and ramp testing of altitude encoders. The AERTB-02448 also makes a neat travel digital altimeter when paired with a blind encoder. Please use questions if there are any other facts needed.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Long Shadow Electronics, Inc.
Country/Region of Manufacture United States
Model AERTB-02448

Directions

Similar products from Process, Temperature & Pressure Calibrators

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies