+ Post new Ad
AMEC ALLIED SPADE DRILL REPLACEMENT TIP V4401D-1.7950 LOC8718, US $60.00 – Picture 0
AMEC ALLIED SPADE DRILL REPLACEMENT TIP V4401D-1.7950 LOC8718, US $60.00 – Picture 0

Amec Allied Spade Drill Replacement Tip V4401d-1.7950 Loc8718

US $60.00

  • Sidney, Ohio, United States
  • Jul 9th
Open on mobile:
QR code
BRAND; AMEC MODEL NUMBER; V4401D-1.7950 WE SHIP OUT SAME DAY DURING THE WORKING WEEK AND HOURS. ON MOST OCCASIONS  IF YOU HAVE A ISSUE OR NEED TO RETURN A ITEM. PLEASE CONTACT US FIRST BEFORE YOU START A RETURN. SO WE HAVE A CHANCE TO MAKE IT RIGHT AND YOU HAPPY WITH YOUR PURCHASE. THANK YOU FOR LOOKING AT OUR LISTING.  PLEASE FEEL FREE TO CHECK OUT OUR  OTHER LISTINGS IN OUR EBAY STORE.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Item Type SPADE DRILL
Brand AMEC
MPN V4401D-1.7950

Directions

Similar products from Other Drilling Tools

(7) Generic SBSB1750 Series B 130* Spade Drill 1-3/4" Inserts *Bulk Regrinds*

(7) Generic SBSB1750 Series B 130* Spade Drill 1-3/4" Inserts *Bulk Regrinds*

  • Redford, Michigan, United States
  • Jul 9th
Walter Coolant Hole Long Drill, Yg-1, Nachi Carbide Drill, And Tap, Lens (15pcs)

Walter Coolant Hole Long Drill, Yg-1, Nachi Carbide Drill, And Tap, Lens (15pcs)

  • Daejeon, Korea, South
  • Jul 9th
Two SKF Dormer Cutting Bits. I- NEW KEO HS #6. 1-KEO HS 4.

Two SKF Dormer Cutting Bits. I- NEW KEO HS #6. 1-KEO HS 4.

  • Decatur, Arkansas, United States
  • Jul 9th
IRWIN INDUSTRIAL TOOL TV612954 3/16" Cobalt Bit

IRWIN INDUSTRIAL TOOL TV612954 3/16" Cobalt Bit

  • Middletown, New York, United States
  • Jul 9th
Drill Bit SP HS, USA,Tapered Shank 7 bits Cutter Grind Sharp, #4 Morse New

Drill Bit SP HS, USA,Tapered Shank 7 bits Cutter Grind Sharp, #4 Morse New

  • Grand Haven, Michigan, United States
  • Jul 9th
Lot Of 15 Reamer Bits From 4”-7” In Length And From 2”- 4” Cutting Length

Lot Of 15 Reamer Bits From 4”-7” In Length And From 2”- 4” Cutting Length

  • Rochester, Michigan, United States
  • Jul 9th
3Pcs 7/16"X6" HSS Cobalt Drill Bit Set Aircraft Extension Long Deep Hole Drills

3Pcs 7/16"X6" HSS Cobalt Drill Bit Set Aircraft Extension Long Deep Hole Drills

  • Chino Hills, California, United States
  • Jul 9th
Drill America DWT Series Qualtech Carbon Steel Hex Threading Die M14 1.5 Size

Drill America DWT Series Qualtech Carbon Steel Hex Threading Die M14 1.5 Size

  • Irvine, California, United States
  • Jul 9th
Iscar Drill 52830 12.8 mm

Iscar Drill 52830 12.8 mm

  • Bratislava, Slovakia
  • Jul 9th
1-3/16 HSS SPOT FACER 1/2 DRIVE SIZE 3/4" OAL MADE IN USA NEW OLD STOCK 01PC

1-3/16 HSS SPOT FACER 1/2 DRIVE SIZE 3/4" OAL MADE IN USA NEW OLD STOCK 01PC

  • Miami, Florida, United States
  • Jul 9th
#2 Bright HSS 60° 2 Flute Long Combined 4" Drill Bit and Countersink

#2 Bright HSS 60° 2 Flute Long Combined 4" Drill Bit and Countersink

  • Corsicana, Texas, United States
  • Jul 8th
#3 Bright HSS 60° 2 Flute Long Combined 4" Drill Bit and Countersink

#3 Bright HSS 60° 2 Flute Long Combined 4" Drill Bit and Countersink

  • Corsicana, Texas, United States
  • Jul 8th
GARR USA 1400 #4 SOLID CARBIDE 1/8" X 60° CENTER DRILL & COUNTERSINK #58060

GARR USA 1400 #4 SOLID CARBIDE 1/8" X 60° CENTER DRILL & COUNTERSINK #58060

  • Harwinton, Connecticut, United States
  • Jul 8th
#5 Bright HSS 60° 2 Flute Long Combined 4" Drill Bit and Countersink

#5 Bright HSS 60° 2 Flute Long Combined 4" Drill Bit and Countersink

  • Corsicana, Texas, United States
  • Jul 8th
#6 Bright HSS 60° 2 Flute Long Combined 5" Drill Bit and Countersink

#6 Bright HSS 60° 2 Flute Long Combined 5" Drill Bit and Countersink

  • Corsicana, Texas, United States
  • Jul 8th
1 pc. 5.7mm VHM-P40 3 FLUTE SOLID CARBIDE TITEX-PLUS DRILL (loc B5)

1 pc. 5.7mm VHM-P40 3 FLUTE SOLID CARBIDE TITEX-PLUS DRILL (loc B5)

  • Carrollton, Texas, United States
  • Jul 8th
5PCS #1 COBALT TWIST DRILL BIT 0.228 SHANK 2 1/4 LOC 4" OAL

5PCS #1 COBALT TWIST DRILL BIT 0.228 SHANK 2 1/4 LOC 4" OAL

  • Dayton, Ohio, United States
  • Jul 8th
5PCS RAPIDKUT #43 SOLID CARBIDE JOBBER TWIST DRILL BIT 0.089 SHANK 1" LOC 2" OAL

5PCS RAPIDKUT #43 SOLID CARBIDE JOBBER TWIST DRILL BIT 0.089 SHANK 1" LOC 2" OAL

  • Dayton, Ohio, United States
  • Jul 8th
7PCS HERTEL 3/16 TiAlN COBALT JOBBER TWIST DRILL BIT 2" LOC 3 1/2 OAL .1875

7PCS HERTEL 3/16 TiAlN COBALT JOBBER TWIST DRILL BIT 2" LOC 3 1/2 OAL .1875

  • Dayton, Ohio, United States
  • Jul 8th
NACHI 2-055-021-375 ROLLER BEARING DEEP GROOVE FACTORY SEALED

NACHI 2-055-021-375 ROLLER BEARING DEEP GROOVE FACTORY SEALED

  • Pennsauken, New Jersey, United States
  • Jul 8th

People who viewed this item also vieved

SECO Indexible Drill / Boring, 1.270" Diameter x 6" Depth of cut, ABS 50 Shank,

SECO Indexible Drill / Boring, 1.270" Diameter x 6" Depth of cut, ABS 50 Shank,

  • Laguna Hills, California, United States
  • Jan 30th
RIGIDEX INDEXABLE DRILL

RIGIDEX INDEXABLE DRILL

  • Kieler, Wisconsin, United States
  • Jan 30th
KENNAMETAL KTIP0492R5SS056 012.500 012.99 0.492 0.5118 5XD COOLANT DRILL BODY

KENNAMETAL KTIP0492R5SS056 012.500 012.99 0.492 0.5118 5XD COOLANT DRILL BODY

  • Punta Gorda, Florida, United States
  • Jan 30th
TN-60--- STS Carbide Tip Flat Bottom Drill 1.042 Dia 1" Shank thru coolant 9" oa

TN-60--- STS Carbide Tip Flat Bottom Drill 1.042 Dia 1" Shank thru coolant 9" oa

  • Lebanon, Tennessee, United States
  • Jan 30th
TS-15599 STS #38728 Carbide Tip Flat Bottom Drill 1.042 Dia 1" Shank thru coolan

TS-15599 STS #38728 Carbide Tip Flat Bottom Drill 1.042 Dia 1" Shank thru coolan

  • Lebanon, Tennessee, United States
  • Jan 30th
TS-15599 STS #41810 Carbide Tip Drill .980 Dia 1" Shank thru coolant 9" oal.

TS-15599 STS #41810 Carbide Tip Drill .980 Dia 1" Shank thru coolant 9" oal.

  • Lebanon, Tennessee, United States
  • Jan 30th
#53 Chucking Reamer .0595 4-Flute Metalwork NEW set of 2

#53 Chucking Reamer .0595 4-Flute Metalwork NEW set of 2

  • Elk River, Minnesota, United States
  • Jan 30th
12 ea wire size # 46 Jobber Drill Bits Chicago Latrobe 44116 type 150 ((Loc15))

12 ea wire size # 46 Jobber Drill Bits Chicago Latrobe 44116 type 150 ((Loc15))

  • Saint Louis, Missouri, United States
  • Jan 30th
Letter number fractional jobber drill set 73285355

Letter number fractional jobber drill set 73285355

  • Lancaster, Pennsylvania, United States
  • Jan 30th
SCREW MACHINE DRILL COBALT #18 {.1695"] DIAM 135 SPLIT POINT 10 PCS NEW $10.00

SCREW MACHINE DRILL COBALT #18 {.1695"] DIAM 135 SPLIT POINT 10 PCS NEW $10.00

  • North Tonawanda, New York, United States
  • Jan 30th
SCREW MACHINE DRILL COBALT #16 {.1770"] DIAM 135 SPLIT POINT 10 PCS NEW $10.00

SCREW MACHINE DRILL COBALT #16 {.1770"] DIAM 135 SPLIT POINT 10 PCS NEW $10.00

  • North Tonawanda, New York, United States
  • Jan 30th
SCREW MACHINE DRILL COBALT #15 {.180"] DIAM 135 SPLIT POINT 10 PCS NEW $8.00

SCREW MACHINE DRILL COBALT #15 {.180"] DIAM 135 SPLIT POINT 10 PCS NEW $8.00

  • North Tonawanda, New York, United States
  • Jan 30th
2.3mm and 2.45mm guhring solid carbide thru coolant drills

2.3mm and 2.45mm guhring solid carbide thru coolant drills

  • Madera, California, United States
  • Jan 30th
7.5mm SGS Carbide 5xD TiALN Coolant Thru Coated Drill 63942 (N 648)

7.5mm SGS Carbide 5xD TiALN Coolant Thru Coated Drill 63942 (N 648)

  • Dallas, Texas, United States
  • Jan 30th
5pc 7mm mitsubishi solid carbide through coolant drills

5pc 7mm mitsubishi solid carbide through coolant drills

  • Madera, California, United States
  • Jan 30th
CHICAGO LATROBE DRILL BIT 31/32 # 408355 HUGE LENGTH 15" CLEAN EX COND REF #1

CHICAGO LATROBE DRILL BIT 31/32 # 408355 HUGE LENGTH 15" CLEAN EX COND REF #1

  • Alden, New York, United States
  • Jan 30th
CLEVELAND MORSE TAPER DRILL BIT 1 3/8 X 13 (L) HIGH SPEED LATHE MILL #48

CLEVELAND MORSE TAPER DRILL BIT 1 3/8 X 13 (L) HIGH SPEED LATHE MILL #48

  • Tonawanda, New York, United States
  • Jan 30th
NATIONAL MORSE TAPER DRILL BIT 1 19/32 X 13 3/4 (L) HIGH SPEED LATHE MILL #47

NATIONAL MORSE TAPER DRILL BIT 1 19/32 X 13 3/4 (L) HIGH SPEED LATHE MILL #47

  • Tonawanda, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies