Amprobe Ac68c True-rms 600a Clamp Meter

US $509.92

Richmond Hill, New York, United States
Jan 29th

Open on mobile:
QR code

Amprobe AC68C True-RMS 600A Clamp Meter The Amprobe AC68C digital clamp meter is a true RMS (root mean square) sensing, manual-ranging multimeter for measuring current, voltage, resistance, and frequency in electrical testing applications. It has a transformer clamp that measures alternating current (AC) and direct current (DC) to 600 amp. The meter comes with detachable test leads that measure DC voltage and AC voltage to 600 volts (V), resistance to 4 kilohms, and frequency to 20 kilohertz (kHz). The clamp has two jaws that can close around a conductor up to 1.5" (40 mm) in diameter to measure current or frequency without touching or interrupting the circuit. The peak hold reading displays the maximum measurement of a current or voltage surge. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether a circuits diodes are working properly. The hold function keeps the reading on the display, even after the meter is disconnected. The meter's backlit liquid crystal display (LCD) is visible in low light. The unit automatically turns off after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform, or non-linear loads, such as electronic devices or motors, where the current or voltage has a sinusoidal non-sinusoidal waveform. It is a manual-ranging meter and requires that the operator choose the appropriate operating range. The meter has a 4,000-count resolution, meaning it can display up to 3,999 units (3-3/4 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 600V, which covers items used with enclosed building circuit installations (service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply). The unit comes with a soft vinyl carrying case.SpecificationsMaximum alternating current (AC) input400 ampMaximum AC voltage input600 volts (V)Maximum direct current (DC) voltage input600VMaximum resistance detected4 kilohmsMaximum frequency detected20 kilohertz (kHz)Power supply9V NEDA 1604 or 1EC 6F22 battery (one, installed)Standards met and certificationsEuropean Normal (EN) International Electrotechnical Commission (IEC) and EN safety standard 61010-1 European Conformity (CE) Underwriters Laboratories (UL)Weight1 lb./465 gMeter dimensions9 x 3 x 1.5 inches/228 x 76 x 39 mm (H x W x D)H is height, the vertical distance from the lowest to highest point W is width, the horizontal distance from left to right D is depth, the horizontal distance from front to back.Clamp meters (also called clamp-on meters) measure electrical current without cutting through wires or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp meters diagnose problems in electrical equipment, wiring, and power supplies. The meter's current clamp has two jaws that fit around a conductor to take measurements. All clamp meters test for current. Some come with test leads and inputs for measuring voltage, capacitance, and resistance. They display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages determine meter choice. Safety ratings are based on the International Electrotechnical Commission's (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA.Whats in the Box?AC68C TRMS digital clamp multimeter(1) Test lead set(2) 9V battery (installed)Soft vinyl carrying caseInstructions Product Features: Digital clamp meter measures alternating current (AC) to 600 amp, direct current (DC) to 600 amp, DC voltage and AC voltage to 600 volts (V), resistance to 4 kilohms, and frequency to 20 kilohertz (kHz) True RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, where the current or voltage has a sinusoidal or nonsinusoidal waveform Transformer clamp with a 1.5" (40 mm) jaw opening measures current without touching or interrupting the circuit Peak hold reading displays the maximum measurement of a current or voltage surge Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 600V Dimensions (in): 2.00 X 13.10 X 8.30 ____________________________________________________________ Important Information: We offer discounted rates for bulk purchases, please inquire. We combine shipping, please note that certain items cannot be combined. In case you don&rsquot see the shipping rate displayed, please feel free to contact us for a shipping quote. _________________________________________________________________ International Shipping: Ø if you need a super fast international shipping please contact us Ø We do combine shipping, the more you buy the lower the shipping cost. Ø International shipping may be subject to a longer handling time. Ø Estimated time in transit is still just an estimate, in some cases items are subject to an extended time in transit due to custom delays, extended inspections in your country or lack of efficiency of the postal service. Ø USPS Standard mail or Priority mail are not guaranteed to be trackable, the service which is guaranteed to be trackable is USPS EXPRESS mail. Ø Most items are shipped with USPS. However, if you prefer a different shipping method, please notify us prior to purchase. Ø We cannot be responsible for time in transit, custom fees or for custom delays. Ø All international items are insured. Thank you for Looking! You may be interested in our other listings on eBay.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Amprobe
Size Type	Regular
UPC	0095969365505
Model	AC68C