Amprobe Acd-15 Trms-pro 2000a Digital Clamp Multimeter W/ Voltect Non-contact

US $271.73

Richmond Hill, New York, United States
Jan 29th

Open on mobile:
QR code

Amprobe ACD-15 TRMS-PRO 2000A Digital Clamp Multimeter with VolTect Non-Contact Voltage Detection The Amprobe ACD-15 TRMS Pro digital clamp meter with non-contact voltage detector is a true RMS (root mean square) sensing, manual- or auto-ranging multimeter for measuring current, voltage, capacitance, resistance, and frequency in electrical testing applications. It has a transformer clamp that measures alternating current (AC) to 2,000 amp. The meter comes with detachable test leads that measure AC voltage and direct current (DC) voltage to 600 volts, capacitance to 2,000 microfarads, resistance to 6 megaohms, and frequency to 30 kHz. The clamp has two jaws that can close around electrical conductors up to 1.77" (45 mm) in diameter to measure current without touching or interrupting the circuit. The meter's non-contact voltage detector senses AC voltage without making contact with the circuit. An automatic detection mode selects AC voltage, DC voltage, or resistance function based on input. The backlit liquid crystal display (LCD) is visible in low light. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether the circuits diodes work properly. The hold function keeps the reading on the display, even after the meter is disconnected. The unit automatically turns off after 3 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock. This true RMS (root mean square) sensing meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform, or non-linear loads, such as electronic devices or motors, where the current or voltage has a sinusoidal non-sinusoidal waveform. This auto-ranging multimeter automatically selects the correct operating range for the property being measured. The meter has a 6,000-count resolution, meaning that it can display up to 5,999 units (3-5/6 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category III installations up to 600V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply. The unit comes with a soft carrying case.SpecificationsMaximum alternating current (AC) input2,000 ampMaximum AC voltage input600 volts (V)Maximum direct current (DC) voltage input600VNon-contact AC voltage detection range15 to 300VMaximum resistance detected6 megaohms Maximum capacitance detected2,000 microfaradsMaximum frequency detected30 kilohertz (kHz)Power supply 1.5V NEDA 24A or IEC LR03 AAA batteries (two, installed)Standards met and certificationsInternational Electrotechnical Commission (IEC) and European Normal (EN) safety standard 61010-1 European Conformity (CE)Weight7.7 oz./220 gMeter dimensions8.8 x 3.1 x 1.6 inches/224 x 78 x 40 mm (H x W x D)H is height, the vertical distance from the lowest to highest point W is width, the horizontal distance from left to right D is depth, the horizontal distance from front to back.Clamp meters (also called clamp-on meters) measure electrical current without cutting through wires or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp meters diagnose problems in electrical equipment, wiring, and power supplies. The meter's current clamp has two jaws that fit around a conductor to take measurements. All clamp meters test for current. Some come with test leads and inputs for measuring voltage, capacitance, and resistance. They display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages determine meter choice. Safety ratings are based on the International Electrotechnical Commission's (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA.Whats in the Box? ACD-15 TRMS Pro digital clamp multimeter Test lead set (2) 1.5V NEDA 24A or IEC LR03 AAA batteries (installed) Carrying case Instructions Product Features: Digital clamp meter measures alternating current (AC) to 2,000 amp, direct current (DC) voltage and AC voltage to 600 volts (V), capacitance to 2,000 microfarads, resistance to 6 megaohms, and frequency to 30 kilohertz (kHz) True RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, where the current or voltage has a sinusoidal or nonsinusoidal waveform Transformer clamp with 1.77" (45 mm) jaw opening measures current and frequency without touching or interrupting the circuit Non-contact voltage detector senses AC voltage without making contact with the circuit Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 600V Dimensions (in): 2.90 X 12.10 X 5.80 ____________________________________________________________ Important Information: We offer discounted rates for bulk purchases, please inquire. We combine shipping, please note that certain items cannot be combined. In case you don&rsquot see the shipping rate displayed, please feel free to contact us for a shipping quote. _________________________________________________________________ International Shipping: Ø if you need a super fast international shipping please contact us Ø We do combine shipping, the more you buy the lower the shipping cost. Ø International shipping may be subject to a longer handling time. Ø Estimated time in transit is still just an estimate, in some cases items are subject to an extended time in transit due to custom delays, extended inspections in your country or lack of efficiency of the postal service. Ø USPS Standard mail or Priority mail are not guaranteed to be trackable, the service which is guaranteed to be trackable is USPS EXPRESS mail. Ø Most items are shipped with USPS. However, if you prefer a different shipping method, please notify us prior to purchase. Ø We cannot be responsible for time in transit, custom fees or for custom delays. Ø All international items are insured. Thank you for Looking! You may be interested in our other listings on eBay.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Amprobe
Size Type	Regular
UPC	0095969365796
Model	ACD-15 TRMS-PRO