Amprobe Bat-500 Battery Capacity / Impedance Tester 0 - 40v

US $559.99

Brookville, Indiana, United States
Jan 29th

Open on mobile:
QR code

Appears new in original box. The Amprobe BAT-500 battery impedance tester is a battery capacity tester for assessing impedance, resistance, voltage, and power capacity of nickel cadmium (NiCd), nickel-metal hydride (NiMH), lithium-ion (Li-ion), lead-acid, and alkaline batteries. The tester uses the alternating current (AC) four-terminal method to measure impedance eliminates lead impedance and contact impedance for more accurate results. The comparator function compares values measured by the tester with preset high and low limit values for internal impedance and voltage level. The unit then indicates whether the battery passes (green LED), is borderline (yellow LED and beep), or fails the test (red LED and beep). It tests batteries up to 500Ah, resistance up to 40 ohms, and voltage up to 40V direct current (DC). The data capture memory holds up to 500 data sets and the data logging memory stores up to 9,600 data sets for later download to a PC via an RS-232 cable (included).The dual LCD screen shows both internal impedance and voltage of the battery being tested and includes a hold function. The tester is powered by six AA batteries, which allow for 7 hours of continuous use. It has an auto power-off function that turns the unit off after 30 min of idle time. The BAT-500 is designed for use by electricians, electrical contractors, and auto mechanics. Specifications Power supply AA batteries (six, included) Battery power range 0 to 500Ah Resistance range 0 to 40 ohms DC voltage range 40V Weight (including batteries) 1.1lb./500g Dimensions 9.8 x 3.9 x 1.8 inches / 250 x 100 x 45mm (H x W x D) H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, or leads connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit; multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen. Meter choice includes the electrical properties to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. An electrical test meter has multiple settings that correspond to potential ranges of values for the properties it can measure. A manual ranging meter requires the operator to flip through different settings until the correct range is reached. An autoranging meter cycles through range settings automatically until it reaches the correct range. Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA. What’s in the Box? BAT-500 Battery Impedance Tester Software CD (1) Set Kelvin clips RS-232 to USB bridge (6) AA batteries Instructions

Condition:

New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. ...

Brand

Amprobe