AMX NI-4100/256 Netlinx Integrated Controller w/AMX:NI-X1XX 512 MB Flash Upgrade, US $350.00 – Picture 0

AMX NI-4100/256 Netlinx Integrated Controller w/AMX:NI-X1XX 512 MB Flash Upgrade, US $350.00 – Picture 1

AMX NI-4100/256 Netlinx Integrated Controller w/AMX:NI-X1XX 512 MB Flash Upgrade, US $350.00 – Picture 2

AMX NI-4100/256 Netlinx Integrated Controller w/AMX:NI-X1XX 512 MB Flash Upgrade, US $350.00 – Picture 3

AMX NI-4100/256 Netlinx Integrated Controller w/AMX:NI-X1XX 512 MB Flash Upgrade, US $350.00 – Picture 4

AMX NI-4100/256 Netlinx Integrated Controller w/AMX:NI-X1XX 512 MB Flash Upgrade, US $350.00 – Picture 5

AMX NI-4100/256 Netlinx Integrated Controller w/AMX:NI-X1XX 512 MB Flash Upgrade, US $350.00 – Picture 6

Amx Ni-4100/256 Netlinx Integrated Controller W/amx:ni-x1xx 512 Mb Flash Upgrade

US $350.00

Providence, Rhode Island, United States
Feb 24th

Open on mobile:
QR code

AMX NI-4100/256 Netlinx Integrated Controller w/ (2) AMX:FG423-41 Power Supplies, (3) NXD-CV5 5" Touch Screens, and (1) NXD-500I Touch Screen. NI-X1XX 512 MB Flash Upgrade. NOTE: 3 SCREENS DO NOT HAVE SURROUND TRIM. EVERTHING WORKED WHEN IT WAS REMOVED FROM A SYSTEM, BUT WAS NOT TESTED THEREAFTER. Sold AS-IS 8 – IR ports , 8 – I/O ,8 – Relays ,7 – RS-232 / RS-422 / RS-485 Serial ports , 3 – Communication Networks: ICSNet, AXLink and Ethernet (TCP/IP) 4 – NetLinx Control Card Expansion slots that support all NXC control cards. The NI-4100 series of NetLinx Controllers provide versatility with the ability to integrate the largest number of devices in the NI Series of Master Controllers, including projectors, lighting, VCR and DVD players, thermostats and other electronic equipment. In these technology-driven environments, this solution allows for the future addition of more devices and control capabilities. With a perfect mix of compatible formats, the NI-4100 series offers flexibility and customization for businesses experiencing rapid growth and for homes that demand seamless integration of technology and design. The NI-4100 series provides higher performance with a faster processor, up to 256MB of onboard RAM and Duet-compatibility. SPECIFICATIONS DIMENSIONS (HWD) 5 3/16" x 17" x 9 5/16" (13.2 cm x 43.2 cm x 23.7 cm) RU: 3 WEIGHT 9.15 lbs (4.15 kg) POWER 900 mA @ 12 VDC ENCLOSURE Metal with black matte finish MEMORY 64 MB SDRAM (FG2105-06) 256 MB RAM (FG2105-26) 1 MB of Non-volatile SRAM COMPACT FLASH 2 GB Compact Flash (upgradeable to 4 GB factory programmed) ONBOARD MASTER 404 MIPS REGULATORY COMPLIANCE FCC Part 15 Class B CE EN 55022 CE EN 55024 CE EN 60950-1 IEC 60950 UL 60950-1 FRONT PANEL COMPONENTS LINK/ACT: Green LED blinks when the Ethernet cables are connected and terminated correctly. Also blinks when receiving Ethernet data packets Status: Green LED blinks to indicate that the system is programmed and communicating properly Output: Red LED blinks when the Controller transmits data, sets channels, sends data strings, etc. Input: Yellow LED blinks when the Controller receives data from button pushes, strings, commands, channel levels, etc. RS-232/422/485 LEDs Relay LEDs IR/Serial LED I/O LEDs NetLinx Control Card Slot 1 - 4 Rack-mount brackets: Provides an installation option for the Integrated Controller to be mounted into an equipment rack, when used with the Installation Kit (KA2105-01) REAR PANEL CONNECTORS RS-232/422/485 (Ports 1 - 7) ICSNet: Two RJ-45 connectors for ICSNet interface (included) ICSHub Out: RJ-45 connector provides data to a Hub connected to the Controller (included) Relay (Port 8) Digital I/O (Port 17) IR/Serial (Ports 9 - 16) Program Port Configuration DIP Switch: Sets the communication parameters for the Program port ID Pushbutton: Sets the NetLinx ID (Device only) assignment for the device Ethernet Port: RJ-45 port for 10/100 Mbps communication. LEDs show communication activity, connection status, speeds, and mode information: - SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps and turns Off when the speed is 10 Mbps. - L/A (link/activity) - Green LED lights On when the Ethernet cables are connected and terminated correctly, and blinks when receiving Ethernet data packets. AxLink LED: Green LED indicates the state of the AxLink port AxLink Port: 4-pin 3.5 mm mini-Phoenix (male) connector that provides data and power to external control devices Power Port: 2-pin 3.5 mm mini-Phoenix (male) connector CardFrame Number DIP Switch ENVIRONMENTAL Operating Temperature: 0° C (32° F) to 50° C (122° F) Operating Humidity: 20% to 85% RH Heat Dissipation (Typical): 36.9 BTU/hr

“Great condition with normal wear, some scratches mainly from rack mounting. Fully tested and there is no known issues.”

UPC	Netlinx NI-4100/256 Netlinx Integrated Controller