Anritsu Ms8608a Digital Mobile Radio Transmitter Tester 7.8ghz W/08/09/cdma/gsm

US $13000

  • Laguna Hills, California, United States
  • Jun 1st
Anritsu MS8608A Digital Mobile Radio Transmitter Tester, 7.8 GHz  hardware options 08 Pre-amplifier (100 kHz to 3 GHz) 09 Ethernet interface software options: MX860801B W-CDMA Measurement Software MX860802A GSM Measurement Software MS8608A is a transmitter tester equipped with an internal spectrum analyzer, a modulation analyzer and a power meter. One tester can cover the development and manufacturing of base stations and mobile stations, as well as the construction and maintenance of base stations. MS8608A supports 9 kHz-7.8 GHz and high power inputs up to +40 dBm.   The spectrum analyzer has resolution bandwidths up to 20 MHz, meaning that it can readily support measurements of wide-band signals. The modulation analyzer realizes all Vector Signal Analysis (VSA) functions through high-speed DSP. The power sensor can perform highly accurate power measurements of ±0.4 dB by using an amorphous power sensor.   Up to three measurement software options (such as W-CDMA, GSM/EDGE, HSDPA, WLAN/802.11, CDMA, 1xEVDO) can be installed simultaneously. Input signals can be selected from RF or I/Q inputs. For I/Q signals, balanced or unbalanced input can also be selected. ·                     Excellent performance for evaluating W-CDMA modulation signals. This makes it ideal for the development and manufacture of W-CDMA radio transmitters (base station and mobile).  GSM/EDGE, HSDPA, WLAN/802.11, CDMA, 1xEVDO, and Pi/4DQPSK (PHS, PDC, IS-136) measurements are also supported.  ·                     The built-in spectrum analyser (standard) covers a resolution bandwidth of up to 20 MHz. It is ideal for evaluating devices such as base station power amplifiers, due to its wide dynamic ranges of 68 dB (typical for 5 MHz offset) and 75 dB (typical for 10 MHz offset) for adjacent channel power (ACP) measurement (sweep method). A new average detection mode permits high-accuracy measurement of signal power with this noise-like spreading modulation. ·                     The built-in power meter (standard) integrates an amorphous power sensor for high-accuracy (+-0.4 dB) power measurements.   Options: 08 - PRE-AMPLIFIER (100 KHZ TO 3 GHZ),  09 - ETHERNET INTERFACE     Tested. Guaranteed to work. No manual or other accessories other provided.   CA residents add 8% CA State Sales Tax.                  

Directions

Similar products from Cellular Test Sets and Antenna Analyzers

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies