US $51.99
| Condition: |
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully
operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
...
|
Shape | Corner |
| Block Type | Precision Setup Block | ||
| MPN | Does Not Apply | ||
| Brand | Unbranded |
Directions
Similar products from Supporting Blocks & Sets
Fowler 52-437-006 Hardened Steel Adjustable Parallel 6 Pairs Set 6" L X 0.125...
LOT OF 11 USED ASSORTED STEEL SET UP / PARALLEL BLOCKS
Cast Iron T-Slotted Riser Blocks 20" X 55" X 13" high
Wenyu Parallel Set 1/8 Inch 10 Pairs Parallels 2 Holes Precision 0.0002 Inch ...
Brown & Sharpe Pair of 2 V Blocks with Clamp No. 599-749 in a box
Magnetic Transfer Blocks Toolmaker Machinist EDM Grind Anton Machine ?
BENCH BLOCK SIZE 3" ROUND - HOLES 1/8" TO 5/8" 2 pcs/set
MITUTOYO TWO MATCHED V-BLOCKS 1-1/4" X 1-1/4" X 1-5/8" WITH TWO CLAMPS
5 TE-CO USA 40105 Steel Step Blocks Set Up Hold Down Machinists Tooling jb2
(2 Pk) TE-CO Steel Step Block Set 1" x 2-15/32" x 3-3/4" 40104
18PCS Parallel Horns Pads Flat Vise Plates Contour Milling Machine Metalworking
CLEAN LITTLE USED MACHINIST V-BLOCK
11x8"x5-1/2" Cast Iron 90° Angle Plate/Block Machinist Set Up Fixture
PAIR OF 6FT BALL CABLE HOLD DOWNS 5/8" BALL DIA
TWO MAGNETIC TRANSFER PARALLEL BLOCKS 1-1/4" X 4" X 8" READ DESCRIPTION
(5.1cm x 5.1cm - 1cm x 2.5cm - 2.2cm Size, Block Pair Set) - HHIP
(10cm - 1cm x 5.1cm - 1cm x 2.5cm - 2.2cm Size, Single) - HHIP 3402-0007
HOMEMADE ANGLE PLATE GRIND FIXTURE TOOLMAKER MACHINIST HERMANN SCHMIDT BOX
Chuck Jaws - Serrated (set of 3)
People who viewed this item also vieved
3 STARK INDUSTRIES #4MT WITH FEMALE 118 DEG. CENTER
MOTOR TOOL 5MT LIVE CENTER HD-500 USA
Jarno #16 Taper Lathe Dead Center 3 Piece Set
3/4" R-8 SPINDLE KEYLESS DRILL CHUCK FOR BRIDGEPORT, ETC
SHOP FOX D4103 MINI LATHE CHUCK WITH MT #1 & MT #2 ARBORS & WRENCHES. NEW IN BOX
2" MINI LATHE CHUCK - MT2 ARBOR, MACHINIST TOOLS
PLAIN MILLING CLAMPS TECO 4" LONG 1 1/2 WIDE STUD SIZE 5/8 OR M16 (2) #52809
U CLAMP STRAP 6-1/4 X 4-7/16 X 7/8 (2-5/8 X 2-3/16 INSIDE CLEARANCE) #9327
Collet Closer - Royal for 5C Collets - 18" LOA - 14" in headstock
CARBOLOY INC, TOOL HOLDER, EDP# 43484, WO# 5031, NMTB50
ETM GFI/ER Floating Reamer Collet Chuck - 3/4" Straight Shank Shank Length:2.56"
9/64" Erickson 100TG 0141 Collet, Used
HARDINGE 1-5/16" Round 16C "E" Collet, Used
HARDINGE 4mm Round 16C Collet, Used
Angle plate 6 x 8 inch Milling
PRATT & WHITNEY 7" DIAMETER FACE PLATE W/ CAMLOCK MOUNT
8" DIAMETER FACE PLATE W/ D1-4 CAMLOCK MOUNT
TAFT-PEIRCE 5" X 4" RIGHT ANGLE MACHINE TOOL MACHINIST STRAIGHT EDGE 5X4X3-3/4
MACHINIST LATHE MILL NICE Lot of Machinist Mandrells Mandrel s for Work Holding
Bridgeport Milling , Oil Skimmer with Rotary Plate , VOS-850 , NEW
7 PIN HAAS HA5C 5C COLLET INDEXER BRUSH TYPE ROTARY TABLE 4TH AXIS MORI LMSI
BECHLER Screw Machine CF-300 Swiss Horizontal Index Fixture
FADAL VH-65 6 1/2 " 4th Axis Rotary Table - Rebuilt
NEAT VINTAGE NYE TOOL CO.CHICAGO PIPE VISE BENCH MOUNT & RIDGID PIPE WRENCH SEE
WILTON AMV/SP-100 2 AXIS Angle Machine Vise,1-9/16 Deep,4 in Jaw
No.2 Chain Pipe Vise~American Pipe Tool Co. Chicago NICE
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies