+ Post new Ad
ANTON MACH. WKS. BKLYN. N.Y. Precision Ground Parallels 22 Pair Set, US $132 – Picture 0
ANTON MACH. WKS. BKLYN. N.Y. Precision Ground Parallels 22 Pair Set, US $132 – Picture 0

Anton Mach. Wks. Bklyn. N.y. Precision Ground Parallels 22 Pair Set

US $132

  • Chalfont, Pennsylvania, United States
  • May 25th
Open on mobile:
QR code
Used- ANTON MACH. WKS. BKLYN. N.Y. PARALLELS (22) Pair Set 1/4" x 6" - 1/16" Increments In Height (44) Pcs. Hardened & Precision Ground Heights Are: 1/2",9/16",5/8",11/16",3/4" 13/16",7/8",15/16",1",1-1/16",1-1/8",1-3/16",1-1/4" 1-5/16",1-3/8",1-7/16",1-1/2",1-9/16",1-5/8",1-11/16" 1-3/4",1-13/16" All Matched Pairs. Comes With Wooden Case, Lined With New Green Felt (One Piece) And New Heavy Duty Pads, Anti-Skid. Some Have Light Staining & Some Have 1/4" Thickness Ground (See Pics) Excellent To Have For Any Small To Large Machining Company. (Weight 27 lbs) In Very Good Condition! Made in The USA!

Directions

Similar products from Supporting Blocks & Sets

machinist tools Lot/ Mill Lathe Toolmaker/ Large U Block Knee Fixture, Set Up

machinist tools Lot/ Mill Lathe Toolmaker/ Large U Block Knee Fixture, Set Up

  • Sebastopol, California, United States
  • May 25th
MACHINIST TOOLS LATHE MILL Machinist Lot of Hold Down Blocks Some Step Blocks

MACHINIST TOOLS LATHE MILL Machinist Lot of Hold Down Blocks Some Step Blocks

  • Morris Plains, New Jersey, United States
  • May 25th
machinist tools Lot/ Mill Lathe Toolmaker/R8 Face Mill,love Joy Made In USA. Sho

machinist tools Lot/ Mill Lathe Toolmaker/R8 Face Mill,love Joy Made In USA. Sho

  • Sebastopol, California, United States
  • May 25th
Heinrich 3-VB Grip-Master V-Block Attachment - For Model - 3-SV & 3-TS

Heinrich 3-VB Grip-Master V-Block Attachment - For Model - 3-SV & 3-TS

  • Duncan, South Carolina, United States
  • May 25th
Milling Machine Setup Step Blocks Drill Jig Bore

Milling Machine Setup Step Blocks Drill Jig Bore

  • Clinton Township, Michigan, United States
  • May 25th
Machinist Hardened V-Block With Clamp

Machinist Hardened V-Block With Clamp

  • Wheatland, Pennsylvania, United States
  • May 25th
Machinist Toolmaker V-BLOCK Fishtail Large 7 Pounds Grinder Toolroom SUPERB

Machinist Toolmaker V-BLOCK Fishtail Large 7 Pounds Grinder Toolroom SUPERB

  • East Lansing, Michigan, United States
  • May 25th
machinist tools Lot/ Mill Lathe Toolmaker/Milling Cutter,horizontal Mill, Arbor

machinist tools Lot/ Mill Lathe Toolmaker/Milling Cutter,horizontal Mill, Arbor

  • Sebastopol, California, United States
  • May 25th
Vintage Unbranded Miscellaneous 12 Pc Steel Plug Pin Gage Machinst Tools

Vintage Unbranded Miscellaneous 12 Pc Steel Plug Pin Gage Machinst Tools

  • Tampa, Florida, United States
  • May 25th
steel brass alluminum magnet milling 4x2x1 123 blocking

steel brass alluminum magnet milling 4x2x1 123 blocking

  • Stoneboro, Pennsylvania, United States
  • May 25th
Vintage Lufkin No. 905 V Blocks and Clamps in Original Box

Vintage Lufkin No. 905 V Blocks and Clamps in Original Box

  • Indian Trail, North Carolina, United States
  • May 25th
Machinist Tool Makers Taft Pierce V Block & Clamp set of 3

Machinist Tool Makers Taft Pierce V Block & Clamp set of 3

  • Tucson, Arizona, United States
  • May 25th
Magnetic Machinist V Block 231

Magnetic Machinist V Block 231

  • Spencer, Indiana, United States
  • May 25th
MACHINIST penn tool co. FISHTAIL V-BLOCK 3.5x1 7/8x1 7/8 with clamp

MACHINIST penn tool co. FISHTAIL V-BLOCK 3.5x1 7/8x1 7/8 with clamp

  • Hadley, Pennsylvania, United States
  • May 25th
machinist toolmaker grinding set up pair of v'blocks 2x2.5x2.75 with clamps

machinist toolmaker grinding set up pair of v'blocks 2x2.5x2.75 with clamps

  • Hadley, Pennsylvania, United States
  • May 25th
machinist tools Lot/ Toolmaker/ Mill/ Lathe 36 Hss Lathe Tool Bits Lot, Nice Lot

machinist tools Lot/ Toolmaker/ Mill/ Lathe 36 Hss Lathe Tool Bits Lot, Nice Lot

  • Sebastopol, California, United States
  • May 25th
machinist/toolmaker Lot, Lathe,mill,tools,, Fixtures End Mills V Block Shop Made

machinist/toolmaker Lot, Lathe,mill,tools,, Fixtures End Mills V Block Shop Made

  • Sebastopol, California, United States
  • May 25th
gunsmith Block , Tapped Machinist Block Made by Toolmaker with hold downs bolts

gunsmith Block , Tapped Machinist Block Made by Toolmaker with hold downs bolts

  • Waterbury, Connecticut, United States
  • May 24th
PRECISION TOOLMAKERS MACHINIST HARDENED FISHTAIL V BLOCK JIG USA STARRETT

PRECISION TOOLMAKERS MACHINIST HARDENED FISHTAIL V BLOCK JIG USA STARRETT

  • Waterbury, Connecticut, United States
  • May 24th
NICE LOT OF 7 sets MACHINIST TOOLMAKERS SET UP PARALLELS

NICE LOT OF 7 sets MACHINIST TOOLMAKERS SET UP PARALLELS

  • Hadley, Pennsylvania, United States
  • May 24th

People who viewed this item also vieved

5C COLLET STOP

5C COLLET STOP

  • West Point, Pennsylvania, United States
  • Feb 14th
Riken Collets

Riken Collets

  • Rossville, Georgia, United States
  • Feb 14th
CLEMENTS COLLET LATHE CHUCK 10MM

CLEMENTS COLLET LATHE CHUCK 10MM

  • Mokelumne Hill, California, United States
  • Feb 14th
Generic 6" x 1" x 1" Sine Bar

Generic 6" x 1" x 1" Sine Bar

  • Garden City, Idaho, United States
  • Feb 18th
LOT OF TWO 1/8" THREAD FACE PLATE(S) MACHINIST JEWELERS WATCH MAKERS LATHE TOOLS

LOT OF TWO 1/8" THREAD FACE PLATE(S) MACHINIST JEWELERS WATCH MAKERS LATHE TOOLS

  • Lake Hiawatha, New Jersey, United States
  • Feb 18th
MACHINIST LATHE MILL Lathe Steady Rest

MACHINIST LATHE MILL Lathe Steady Rest

  • Morris Plains, New Jersey, United States
  • Feb 18th
DE-STA-CO 609 hold down side clamps 6pcs all ok

DE-STA-CO 609 hold down side clamps 6pcs all ok

  • Montebello, California, United States
  • Feb 24th
DE-STA-CO 609 hold down side clamps 6pcs

DE-STA-CO 609 hold down side clamps 6pcs

  • Montebello, California, United States
  • Feb 24th
Armstrong No. 0, Bridge,Boiler,Heavy duty C-clamp, opens 0 to 1-1/4"

Armstrong No. 0, Bridge,Boiler,Heavy duty C-clamp, opens 0 to 1-1/4"

  • Cocoa, Florida, United States
  • Feb 24th
VINTAGE INDUSTRIAL MACHINIST TOOL VISE NEEDS HELP UNUSUAL

VINTAGE INDUSTRIAL MACHINIST TOOL VISE NEEDS HELP UNUSUAL

  • Waterbury, Connecticut, United States
  • Feb 24th
VISE JAWS,

VISE JAWS,

  • Wausau, Wisconsin, United States
  • Feb 24th
Vintage 1920's Prentiss Parker Bulldog No.19 Swivel Jaw Machinist Vice Vise RARE

Vintage 1920's Prentiss Parker Bulldog No.19 Swivel Jaw Machinist Vice Vise RARE

  • San Diego, California, United States
  • Feb 24th
Vintage Carpainter's VISE Record No. 50 made in England

Vintage Carpainter's VISE Record No. 50 made in England

  • Richmond Hill, Ontario, Canada
  • Feb 27th
2# LIVE CENTER NO. 4 MORSE TAPER LATHE HOMESHOP MACHINIST SOUTHBEND

2# LIVE CENTER NO. 4 MORSE TAPER LATHE HOMESHOP MACHINIST SOUTHBEND

  • Sioux Falls, South Dakota, United States
  • Feb 27th
LIVE CENTER NO. 2 MORSE TAPER LATHE HOMESHOP MACHINIST SOUTHBEND

LIVE CENTER NO. 2 MORSE TAPER LATHE HOMESHOP MACHINIST SOUTHBEND

  • Sioux Falls, South Dakota, United States
  • Feb 27th
BISON 15-3/4" Diameter, 3 Jaw Chuck, 5" Hole, Flat Back - Made in Poland

BISON 15-3/4" Diameter, 3 Jaw Chuck, 5" Hole, Flat Back - Made in Poland

  • Chatsworth, California, United States
  • Feb 27th
Runnig machine

Runnig machine

  • New York, New York, United States
  • Feb 27th
6" Buck 6 Jaw Scroll Chuck 3662 & Mounting Plate 3/4" Bore 16TPI From Wood Lathe

6" Buck 6 Jaw Scroll Chuck 3662 & Mounting Plate 3/4" Bore 16TPI From Wood Lathe

  • Troy, Michigan, United States
  • Feb 27th
Atlas Craftsman 10" Metal Lathe Follow Follower Rest Assembly 9-396

Atlas Craftsman 10" Metal Lathe Follow Follower Rest Assembly 9-396

  • Waterbury, Connecticut, United States
  • Mar 29th
SPI Adjustable Parallel 6 Piece Set Minimum Measurement: 3/8" Maximum: 2-1/4"

SPI Adjustable Parallel 6 Piece Set Minimum Measurement: 3/8" Maximum: 2-1/4"

  • Milwaukee, Wisconsin, United States
  • Mar 29th
Lathe turret hexturret Enco

Lathe turret hexturret Enco

  • South Windsor, Connecticut, United States
  • Mar 29th
10" ROTARY TABLE "Made in Japan"

10" ROTARY TABLE "Made in Japan"

  • Edison, New Jersey, United States
  • May 25th
CLEAN! L-W CHUCK 11" INDEXING DIVIDING HEAD

CLEAN! L-W CHUCK 11" INDEXING DIVIDING HEAD

  • Covina, California, United States
  • May 25th
Tsudakoma RN-250R Rotary Table cables included to connect to your fourth axis

Tsudakoma RN-250R Rotary Table cables included to connect to your fourth axis

  • Columbia, South Carolina, United States
  • May 25th
Jacobs model 50 chuck and 9 collets

Jacobs model 50 chuck and 9 collets

  • Euclid, Ohio, United States
  • May 29th
ZLIVECENTER MT5 ER40 COLLET CHUCK TOOL HOLD SET 23 PCs 5MT ER 40 TOOL HOLDER

ZLIVECENTER MT5 ER40 COLLET CHUCK TOOL HOLD SET 23 PCs 5MT ER 40 TOOL HOLDER

  • Diamond Bar, California, United States
  • May 29th
uxcell 25cm Length Black Red Precision ER-32UM Collet Wrench CNC Milling

uxcell 25cm Length Black Red Precision ER-32UM Collet Wrench CNC Milling

  • USA, United States
  • May 29th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies