Arcair Slice Torch 200 amp Exothermic Cutting Torch w/ Collet parts NEW welding, US $800.00 – Picture 0

Arcair Slice Torch 200 amp Exothermic Cutting Torch w/ Collet parts NEW welding, US $800.00 – Picture 1

Arcair Slice Torch 200 amp Exothermic Cutting Torch w/ Collet parts NEW welding, US $800.00 – Picture 2

Arcair Slice Torch 200 amp Exothermic Cutting Torch w/ Collet parts NEW welding, US $800.00 – Picture 3

Arcair Slice Torch 200 amp Exothermic Cutting Torch w/ Collet parts NEW welding, US $800.00 – Picture 4

Arcair Slice Torch 200 amp Exothermic Cutting Torch w/ Collet parts NEW welding, US $800.00 – Picture 5

Arcair Slice Torch 200 amp Exothermic Cutting Torch w/ Collet parts NEW welding, US $800.00 – Picture 6

Arcair Slice Torch 200 amp Exothermic Cutting Torch w/ Collet parts NEW welding, US $800.00 – Picture 7

Arcair Slice Torch 200 Amp Exothermic Cutting Torch W/ Collet Parts New Welding

US $800.00

Londonderry, Ohio, United States
Jan 30th

Open on mobile:
QR code

Arcair Slice Torch 200 amp Exothermic Cutting Torch w/ Collet parts NEW welding This is a NEW Arcair Slice Torch with 6" Collett Extension and 1/4" Collet Nut Assy. Parts have been in storage and may show signs of dust, dirt, scratches, etc. Arcair Slice® Torch 200 Amp Exothermic Torch; Accepts 1/4in (6.4mm) and 3/8in (9.5mm) Slice Cutting Electrodes The Arcair slice cutting system can cut, burn or pierce virtually any metallic, non-metallic or composite material. The system cuts through hard-to-cut materials such as stainless steels, cast iron, aluminium, magnesium plus many other ferrous and non-ferrous metals, even when it is caked with mud, rust or other corrosion. It will cut through slag and refractory materials and can punch through concrete or brick. The Arcair slice is a must for maintenance and repair departments, it can remove headless bolts and frozen pins, cut insulated pipes and ducting, cut through coated structural steel, burn through bridge steel and decking, cut concrete lined pipes, cut through or remove hardfacing from buckets and wear surfaces plus many other tasks. Because the Arcair slice system needs no pre-heat, you can start cutting sooner and finish the job faster. The Arcair slice system works by feeding oxygen and electrical power through a patented slice exothermic cutting rod, you supply oxygen and a 12 volt battery or welding machine (cc). The battery gives you fast ignition and portability, the welding machine lets you maintain a continuous arc (up to 200 amps) with conductive materials for a cutting temperature of over 5500°c. Either way, you simply turn on the oxygen and touch the cutting rod to the slice striker or grounded work piece. The cutting rod ignites immediately and continues to burn as long as there is a supply of oxygen, even without current, it produces temperatures hot enough to cut virtually any material. INTRODUCING THE ARCAIR® SLICE® TORCH AND CUTTING SYSTEMS THE ARCAIR SLICE CUTTING SYSTEM CAN CUT, BURN, MELT OR VAPORIZE NEARLY ANY METALLIC, NON-METALLIC OR COMPOSITE MATERIAL. UNLIKE ANY OTHER CUTTER ON THE MARKET TODAY, THE SLICE CUTTING SYSTEM USES A SPECIAL TORCH THAT SUPPLIES OXYGEN AND POWER TO A PATENTED ARCAIR SLICE EXOTHERMIC CUTTING ROD. A SPARK FROM A 12-VOLT BATTERY IS ALL THAT'S NEEDED TO IGNITE THE ROD. THE BATTERY GIVES YOU PORTABILITY. THE WELDING POWER SUPPLY OFFERS EASE OF USE AND, WHEN NEEDED, HOTTER CUTTING TEMPERATURES. ONCE THE EXOTHERMIC REACTION BEGINS, THE SLICE CUTTING ROD CONTINUES TO BURN WITH OR WITHOUT ELECTRICAL POWER, AS LONG AS YOU MAINTAIN THE CORRECT OXYGEN FLOW. IF YOU USE A WELDING MACHINE WHILE WORKING WITH CONDUCTIVE MATERIALS, THE CUTTING ROD PRODUCES OVER 10,000 A?F [5538 A?C]. BUT EVEN WITHOUT CURRENT, IT STILL PRODUCES TEMPERATURES HOT ENOUGH TO MELT STAINLESS STEEL. THE TECHNOLOGY USED IN THE SLICE SYSTEM WAS PERFECTED DURING YEARS OF ARCAIR DEVELOPMENT, TESTING, FIELD USE AND EXPERIENCE IN EXOTHERMIC CUTTING. THE SLICE TORCH HAS A COMFORT-DESIGNED PISTOL GRIP. A TOUGH BUT LIGHTWEIGHT SHIELD PROTECTS THE OPERATOR FROM HEAT, SLAG AND SPARKS . A SQUEEZE LEVER ON THE HANDLE ALLOWS EASY OXYGEN CONTROL. THE ARCAIR SLICE TORCH, COMPLETE WITH CABLES AND CUTTING ROD, WEIGHS LESS THAN 3.5 KILOS. BESIDES THE TORCH AND RODS, ARCAIR ALSO OFFERS PORTABLE, SELFCONTAINED SLICE CUTTING PACKAGES THAT CAN BE CARRIED TO NEARLY ANY CUTTING JOB, NO MATTER HOW REMOTE. Heavy Equipment/ Construction To: Maintain field and shop equipment Repair buckets Remove seized or worn pins Cut worn or frayed cables Foundries To: Remove trapped or burned in sand from castings Cut gates, risers and fins from castings Cut through slag in furnace clean up Punch relief holes in molds Cut up spilled or old materials for remelt Maintain and repair plant equipment Fire Service/ Rescue Departments To: Gain rapid entry Cut steel doors, cables, bars, hinges, dead bolts, barred windows, debris from building collapse or other rescue operations. Police/SWAT To: Gain rapid entry Cut steel doors, cables, bars, hinges, dead bolts, barred windows, concrete filled pipe and other non metallics. Railroads To: Repair and maintain railways Maintain, repair, remove track Repair/remove sidings and docks Maintain remote equipment Remove derailment damage Mining To: Maintain shop and field equipment Repair coal tipple and belts Remove old piping and railways Pierce holes in rock for blasting Steel Fabrication To: Pierce starter holes in thick plate or stainless etc. Rough cut sections from large plates Do field erection Demolition To: Cut rebar and cables Pierce concrete Cut steel imbedded in concrete Repair and maintain equipment Cut and remove piping Power Plants To: Repair/maintain equipment Remove piping Remove old grating, feeder pans, boilers, and storage tanks. Please read the description and view items carefully. If you need more pictures sent or have a question just send me an email and I will get back with you within 24 hours. Please note that the color may be slightly different from item received due to some lighting variations on photos. Payment must be made at the end of auction. I use USPS for 99% my shipping needs therefore, packages will be shipped during postal hours of operation. Tracking confirmation number is provided unless stated in description. Please check out my other auctions. I’m listed as a 100% positive feedback on EBAY. Check out my rating! Returns are accepted within 14 days after confirmation of delivery. Buyer will be responsible for return shipping. Item must be in original packaging and in unused condition. A 15% restocking fee will be applied. Please contact me if you like to return the product. Thanks for looking and have a wonderful day!

Condition	New other (see details) : A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“read description”