Arduino Portenta H7 32-bit Arm Microcontroller

US $122.36

Swanton, Vermont, United States
Jun 15th

Open on mobile:
QR code

Description Arduino Portenta H7 32-Bit ARM Microcontroller Simultaneously runs high-level code along with real-time tasks Includes two processors that can run tasks in parallel Offers two-fold functionality Can easily run processes created with TensorFlow Lite Provides high-speed booting computation (ms) The Arduino Portenta H7 32-Bit ARM Microcontroller simultaneously runs high-level code along with real-time tasks. The design includes two processors that can run tasks in parallel. For example, is possible to execute Arduino compiled code along with MicroPython one, and have both cores to communicate with one another. The Portenta functionality is two-fold, it can either be running like any other embedded microcontroller board or as the main processor of an embedded computer. Use the Portenta Carrier board to transform your H7 into an eNUC computer and expose all of the H7 physical interfaces. The Portenta family adds two 80 pin high-density connectors at the bottom of the board. This ensures scalability for a wide range of applications by simply upgrading your Portenta board to the one suiting your needs. The board's programming connector is a multipurpose USB-C connector port that can also be used to power the board, as a USB Hub, to connect a DisplayPort monitor, or to deliver power to OTG connected devices. Specifications Microcontroller: STM32H747XI dual Cortex-M7+M4 32bit low power ARM MCU Radio module: Murata 1DX dual WiFi 802.11b/g/n 65 Mbps and Bluetooth 5.1 BR/EDR/LE Secure Element (default): NXP SE0502 Board Power Supply (USB/VIN): 5 V Supported Battery: Li-Po Single Cell, 3.7 V, 700 mAh Minimum Circuit Operating Voltage: 3.3 V Current Consumption: 2.95 µA in Standby mode Display Connector: MIPI DSI host & MIPI D-PHY GPU: Chrom-ART graphical hardware Accelerator Timers: 22 x timers and watchdogs UART: 4 x ports (2 with flow control) Ethernet PHY: 10/100 Mbps Camera Interface: 8-bit, up to 80 MHz SD Card: Interface for SD Card connector Operational Temperature: -40 to +85 °C MKR Headers: Use any of the existing industrial MKR shields on it High-density Connectors: Two 80 pin connectors will expose all of the board's peripherals to other devices ADC: 3 x ADCs with 16-bit max. resolution DAC: 2 x 12-bit DAC (1 MHz) USB-C: Host/Device, DisplayPort out, High/Full Speed, Power delivery What's Included 1 x Arduino Portenta H7 32-Bit ARM Microcontroller

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Arduino
Type	Arduino
MPN	7630049202252
UPC	Does not apply